I’d like to see all the prep Kevin has to do before he can even paint. I figured it was Chris, Letsdig18. I enjoy watching every video of you guys working on equipment. Good to see your boys learning the business.

Watching you guys resurrect these old machines is the best! It would be cool get a behind the scenes video of what Kevin has to do to prep these old girls for paint. I’m sure others would also like to watch that type of content

Great episode again guys, Tuckers welding is getting better and better and he is so modest too!. An LD18 logo on those new plates would look very nice 😀

That Cat needs a major Kevin make over!

You guys do a great job teaching Mason and Tucker. Tucker did a great job of welding

Tucker is a man of few words. But he can sure stack some dimes !!!👍🏼👍🏼👍🏼👍🏼

Doubt folks realize how DANGEROUS this work can be. The PINCH POINTS where one can lose fingers, or hands, are too many to count! 😳 Nice weld Tucker. 👍

I had a feeling that Chris wanted the D7 when i watched his video on it. He was having too much fun testing it out.

I think Mason should win the tool box/tools. 🙂

They sure are going to miss you Mason , good Lucky Buddy!

I really admire your skills and attention to detail. I also think it would be great to see how you go about doing a paint job on one of these old units. It's got to be incredibly time consuming!

Hey Clinton nice job ,but mostly thank you and Kevin and Mason for a great laugh it's nice to see guys paying each other out ,and enjoying each other's company while working really enjoy your channel Mate,better than TV Cheers Kym Adelaide

Nice to see Matt at your shop 👍

I've always wanted one of those I operated one in the US Army in Bavaria in the Alps and fell off the side of the mountain skidding 5000 ft down into the valley. The D7 caterpillar climb straight back up to standing ovation.

Man I can’t wait to see you guys turn this back to a new kitty 🐈‍⬛. This is the mark of a true visionary. You have to look past the problems and know what you are going to turn it into. I always said that was nice because I bought some what people thought were turds and turned them into green.

You know, there is a lot to be said in favor of older equipment Clint. No "government juice", no electronics, no computer and seemingly built heavier duty. Great job in bringing the old D7 kitty cat back from neglect. I figured we'd see Chris (Let's Dig 18) since he was making the KZfaq rounds in Indiana but didn't expect to see Matt (Diesel Creek). Great stuff, as always

Kev is the reason there's safety meetings!!! LMBO 😂😆😂

38.21 I know my eyes are old but that looks like a crack on the inside opposite of the plate with that B Pressure Weld 😂😂 Great job as always.

I'd love to see Kevin's paint job and transport to buyer. Sandblast and a new coat of paint really makes for a complete unit.

Tucker always seems nonplussed, but he does one heck of job welding!

Cliff, Tucker is turning into a very good welder. You need to hire that young man. 😆😆😆

Wow that's one smooth kitty! That's the perfect cat for Mr Chris I can't wait to see him putting it to work down here in NC.

I think Chris letsdig18 has a softness for those old machines because a couple of his newer machines left him stranded because of emissions problems

Either Mike of Dirt Perfect, Chris of LetsDig18, Matt of Diesel Creek, Andrew Camarata or Captain Kleeman. I put 5 choices. But I'm probably way off base. Lol.

a very good video Well Done Mason for putting up with the OLD people

Chris keeps buying that old reliable equipment!! Looking forward to seeing it finished on your channel, and running on Chris' channel!

I SWEAR THT BULL DOZER WAS CRYING WHEN IT GOT TO YOUR DOOR.NOW DO YOUR MAGIC AN ONCE AGAIN YOU WILL HAVE A GREAT HARD WORKING DOZER.

LD18 plates on the sides and the grille, a new paint-job and she'll purr for another 50 years!

Chris.....don't go yellow, go all black. 1. It will look badass(and dirty) 2. If it gets stolen, put out an APB for a mean, badass, dirty dozer.

After the conversation you had with Chris on Mike's livestream (and I've already seen Chris's video of him driving this beast around your yard), and the way he's been expanding his fleet, pretty much a no brainer.

It says something when a young man like Tucker has to step in and fix some other clown's work. Good to see

About time you did a collab with him. He likes nice things and it is obvious that you put out nice things. Can’t wait to see the next step.

That’s why Clint is the Boss “hey is that clean?” Ooops Kevin!

The youtube is let's dig it 18

I figured in his vid this was coming. It is going to make him one damn fine machine.

I laughed out loud in the opening seconds when the blur was still present on top of your C&C logo!

Very impressive job on the welding Tucker!!! Beautiful welds!!!😊

Mr. and Mrs. C are going to pick me for the tools just saying 😁😜❤️😜😁😜❤️

What a fun job making old junk work

It's been three months since this was posted, this is principally directed at Clint. I was introduced to you on another show obviously, that unfortuately was (gulp...)Dirt Perfect who I've since dubbed Dirt Nap. I pretty much immediately liked your productions & particularly the way you run your business. The camera reveals a great deal more than one can believe if you've an eye for detail. I immediately tagged you as a guy headed places. Success is slow in this industry obviously, I started seeing a serious advantage to Chris buying big gear from your shop. But he was a Volvo guy so I wondered. Then he started nabbing up other Cat gear. I hoped. If I could have wished this into existance, Chris would own three of your pieces now I bet. Point is, I'm thrilled this came about for his sake. As always, the best to your family, your business especially Kevin & to you personally. Thanx.

Always try to make the machines look as good as possible for Chris!! All this old cat dozer stuff makes me want a old D8k !!

Great welding by Tucker. Developing some amazing skills, as is Hunter. I hope they realize how blessed they are to have the family they do. And then there is Kevin. Thanks for sharing.

Another great video, thank you for sharing, i learn a lot , always a pleasure see the dream team working 👍👍👍👍

Sounds good Looks like fun when you were running it around the yard

Either Diesel Creek or Letsdig18.....att or Chris🎉

I’m glad chris bought it , going to a good home

That was certainly one huge scoop Mrs Clint of C&C had. So much to done on this old D7F and more in Kevin's trusty hands. Would love to see you in North Carolina with LetsDig18. Great video thank you and well done Mason.

Clint, that’s a beast of a dozer! Take care and I’ll see you down the road…

i like to see kevin to work on this dozer, and a look in the christmas / paint corner sorry for my bad english (belgium)😍

Really nice restoration thus far, can’t wait to see Kevin’s perform his magic Turning the ugly duckling into something Letsdig into something he’ll be proud of.

I'd love to see the full restoration work on this project. Love the collaboration with Chris . Great content as always. Thanks for the upload.

Chris needs to take the winch off and put on some rippers. One of his machines needs them and a D7 might be the best choice. I think to name the D7 "KITTY" and cut out metal letters like the Caterpillar lettering and attach them to the sides where the driver sits. I also would like to see the restoration process after the repairs.

I thought it would of been Chris or matt! Cause both guys like them old iron machines! And I don't blame them one bit! The old units were built to last!!!

Can you please ask Tucker to smile 😃 more lucky boy should have a smile from ear to ear!

That’s some fancy footwork there Clint!

Great video. Nice old iron for sure. Will fit in good with Chris's collection.

looking forward to the C.A.T. picture !

On the opposite side of that patch job almost looked like a crack. Thanks again for the great video and content.

Watching Clint's feet on those pedals reminds me of a 1/2 mile outlaws racer. Great video - fun all the way around! That weld on the left side blade tube was referred to as "chicken daubers" and that would get everyone in the shop to come over and laugh, that would offend the chickens. We know Tucker can seam stitch a weld like a pro 😁

That ole cat sure sounds good

Definitely want to see as much as you can post on that machine. Specially the paint job.

When I drop big radiators in place, if possible I will use 1/4” ply wood on front and back side with a tie down wrapped around to protect the core and fins.

Good thing you wiped off the new camera lens after Kevin put a smudge on it in the intro 😉🤣 would have been a bad video to watch though with that smudge 😅

This CAT pile looks like a little beast!! Chris finally gets a set of rippers, but there backwards for him 😂 Interesting for sure, and every piece is heavy 😂 Nice work guys!!👍🇺🇸

Hi, that was the model of kitties cat I ran back in 78 at Ft. Leonard Wood, Missouri

🤔💡 You're not a bad influence Sausage Fingers. You're a good teacher. 😊

Hey Clinton, You and your team did an awesome job fixing that beast! Nothing worse than a crippled cat! Definitely want to see the sand blasting and cosmetic surgery by Mr. Sausage Fingers himself!! Put a black racing stripe down the middle of the pads for Chris! :) Thumbs up! Stay safe! Jim

So Mrs C finally got to use that 'penciled in' invoice from DP's live stream😄 Nice sale Clint 👍

I'd like to see the prep and paint work.

Well Chis maybe can break in 47:14 the pile of kitty poop in building roads in NC looking forward to seeing it on his channel he will give it great home it will be taken care of for sure awesome watch as always 👍👋🇨🇦

Another great video, crew. Always enjoyable, interesting, educational, informative and entertaining. BTW, the new camera is much more crisper. Thanks for protecting our eyes, Clint 😂👍👍🍻

I was going to make a crack about child labor-laws, but then I realized that those are young-men, not children by any stretch, and once I seen Tucker's work/wields, that opinion was solidified,😉👍, we all know that Matt wasn't there to buy anything, he'd be to scared you might make a dollar off him, lol, who was the other guy?, you never did plug his channel, thanks for sharing guys.

You showed all the easy parts of the cylinder rebuilds :)

42:27 Enjoyed seeing Matt from Diesel Creek make an appearance . I am subscribed to both of your channels .

Kevin's camo paint jobs are my favorite Chris wants it the cat yellow

Good for Chris going back to CAT yellow!

If Letsdig 18 is the new owner you have to put A super soaker in the gun rack. That is so cool you always do a nice job.

D-7 was a solid work horse !

Another awesome video. From kiwi land.

Yes I can see you perfect , actually the camera comes in really clear👍

Kevin's a Big Bully! We never knew 😉

Thank you guys for your vids. Lots of tips and tricks learned.

Looked like Chris from the blurred out dude sitting on the kitty cat 👌🏼🤘🏼🤘🏼now I’ve seen the videos…. and DC , that’ll be cool to go down n push some dirt or trees w LD18

LD18 that is the special KZfaqr? Driving that Dozer, I saw it on his channel.

Capt. Kleeman, to landscape around the KZfaq Yatch!

Nailed it the first time! Matt from Diesel Creek!!

Omg this gonna look FN Awesome!!!!!!

👍 Tucker the tacker got camera shy again. But then again I remember what my teen years were like so i got nothing to say I guess.

Chris [ Letsdig18] !! and Matt [ Desiel Creek ]!! Thought it would be Chris cause he has been looking for one, and then, Here you are picking on up-🙂

Lovely job of welding the strenghten plates....nice seeing rad etc getting fitted etc...stay safe you all

I wish this tractor was gonna get painted!!!!

When you said that you had a 'You Tuber' stopping by I thought of two people who might need ( or want ) another bulldozer and yep, there they both are.

Great video. The cat needed som TLC and you provided it. I'm sure when Kevin works his magic, it will look brand new. Bring on the restoration video.

enjoying your videos about diesel equipment,something I know little about.Your boys dont know how blessed they are to have you, a good father

hello c&c equipment it's is randy and i like yours video is cool thanks friends randy and dirt perfect

Yall are doing a wonderful job ❤

Matt I expected but Chris was a surprise.

Surprised to see Diesel Creek. No junk in sight. But that white HET still looks ridiculous.

Keven almost poked me with his eye !! Not Dirty Feet himself !!??!! 🤠

Can’t wait to see the next video on the cat restoration! Keep up the great work guys!