[Part 3] DIY Magnetic Deburrer Front Panel Assembly
Рет қаралды 2,127
5 жыл бұрынPatreon Link: / chrisdeprisco
Instagram: / chrisdeprisco
Cool Clearpath videos: / @teknicinc
Teknic Website: www.teknic.com/products/clear...
This specific motor: www.teknic.com/model-info/CPM...
Github code: github.com/orangeworksdesign/...
Inspired by some projects I found online ( • Magnetic Polisher and • MAGNETIC TUMBLER MACHINE ) I decided to embark on making my own! This is part one with an overview of the project and the basic functions of the motor and electronics.
@ActiveAtom 5 жыл бұрын
Hi we are sure hoping that when this is all said and done our bought non-ferrous magnetic parts deburr unit needs to be replaced with a home build one like this great one you are building here. You are placing a lot of very well thought our efforts into this build. We will be back for the next video Part 4. Thank you for the share, Lance & Patrick.
@semtex2987 5 жыл бұрын
Very nice build, me like. For longterm use on a device where electronics are exposed to vibrations, one rather would use litz wire than solid wire which tends to break at some point due to continuous movement. But i wouldn't wanna do the work of rewiring again, just wait till the first breaks and the replace them all - could take months or decades or happily never occurs ever.
@simonconvey9645 5 жыл бұрын
Which extrusion system are you using ? The corners look especially well engineered......
@partisanguerrilla3167 5 жыл бұрын
Great on-the-fly planning, great stuff!
@Preso58 5 жыл бұрын
Nice build, way over engineered, just the way I like it!
@johnnyryall1400 5 жыл бұрын
I felt like that touch screen was maybe meant to be pushed up against a glass screen. Sandwiched if ya will?
@johnnyryall1400 5 жыл бұрын
Keep in mind I’m only a painter, which is essentially just a carpenter with his brains knocked out.
@dumle29 5 жыл бұрын
So if I heard you right you're attaching both SPI(MISO MOSI CS CLK) and I2C(SDA SCL) to the LCD. Are both required for it to work?
@ChrisDePrisco 5 жыл бұрын
Yeah, SPI does the LCD and I2C does the touch screen
@dumle29 5 жыл бұрын
@@ChrisDePrisco Aah okay. Interesting that they have an onboard ADC for that. Sure makes it easier to wire :)
Chris DePrisco
Рет қаралды 7 М.
Accusize Industrial Tools
Рет қаралды 9 М.
Triag International AG - swissMODULAR🇨🇭
Рет қаралды 13 М.
Immersed
Рет қаралды 72 МЛН
MaviGadget
Рет қаралды 10 МЛН