Thank you for the support 👍, more mods (ecu, differential, transmission upgrades) coming in the future. Just need to save some a little more money first.

for Q45s y33 chaisses us 240sx s14 camber,toe,traction arms, s14 subframe bushings 240sx s13 or s14 rear knuckle bushings, 240sx s14 rear sway bar bushings, coilovers id go with partshop max or bc coilovers extreme lows 99 nissan maxima ball joints gktech 240sx 65mm front lower control arms s13 or s14 240sx rack n pinion bushings , S14 tension rods angled ones not straight because if your gonna run wide wheels you neeed the bent ones any brand you feel for and there you go also add a s14 rear toe brace from gktech

I hope youll share your experience as well 🙏

I honestly did not have an issue with the spindle nut going on. I did read a couple threads to see what was optimal since i did see the nut a little out and they say about 9 to 10 turns is good for the wheel not to go flying. I got 9. Not entirely sure why it wouldn't fit tho. One thing I do want to fix later is replacing the nuts themselves, I did end reusing mine which I highly advise against. No oem spindle nuts are available from what I've seen but the thread pitch and size is M24 - 1.5. But even with reusing the old ones and leaving them at 9 turn torqued to spec I haven't have any wheel issues or vibrations. I can handle sharp turns at 35mph and highway corners at 90mph. Gotta say those BC coils are a dream for the Q.

kzfaq.info/get/bejne/sLGmnbCYmafRiGw.html

Thank you for the input! Do you have a q or s14 at the moment?..... as far as the front control arms, they were actully made for the q45, i bought really old stock from a distributor so megan racing doesnt make said control arm anymore but the balljoint although its for an s platform knucle its worked perfectly fine with the added washers, i will get it switched out eventually though I've been looking at other s platform FLCA and seen some pretty beefy ones that will do the trick, im not planning on slaming the car or running really wide tires and even the way it is now ive beeting on the car quite a bit, (over 10,000 miles already) ran a couple curbs, potholes, high speed turns, full lock donuts and ive had no issues 🤞. (All with no sway bar too) but once i get the other car running ill update the entire suspension on this one👍

For the front or rear?

I would definitely try to replace all the chasis bushing which are the same from the 240sx. I would also change the insert bushing on the rear knuckles. If you lower the car you'll definitely want it to be stiffer so you don't end up rubbing tires

Sorry for the long wait on the reply 😅

for Q45s y33 chaisses us 240sx s14 camber,toe,traction arms, s14 subframe bushings 240sx s13 or s14 rear knuckle bushings, 240sx s14 rear sway bar bushings, coilovers id go with partshop max or bc coilovers extreme lows 99 nissan maxima ball joints gktech 240sx 65mm front lower control arms s13 or s14 240sx rack n pinion bushings , S14 tension rods angled ones not straight because if your gonna run wide wheels you neeed the bent ones any brand you feel for and there you go also add a s14 rear toe brace from gktech

Rear Lower and upper control arms I got from truhart, initially I wanted megan racing since they do look a lot meatier but I haven't had issue with truhart and I belive they are much cheaper. One thing to note is, if you have lowered your Q the upper control arms will hit your coilover. You might have enough clearance for stock struts tho.

@@ChrisandHisQ so are the rear lower control arms for the 240sx? i cant seem to find any for the q45

@@keyborb5440 yes they are, the entire rear suspension is the same as the 240sx. Differential gearing and strut/spring rates are diffrent tho

@@ChrisandHisQ i appreciate all your help, i just ordered my parts. i have one more question tho, i was on ebay and i saw some interior pieces for sale with your youtube handle on it. are those sold by you?

Yes i am selling some stuff on Ebay for the q45. seller should be yomamajr831. if its another then its not me haha. if you want to learn a little more on the suspension i and everything Q45 i recommend checking out the nico forums. forums.nicoclub.com/post6841181.html#p6841181

How you liking it bro? I’m about to put my Megan racing setup on today

From oem hieght you can drop up to 4 inches with the correct camber and wheel/tire set up. But as far as "is it worth it" it really depends what ride experience you want. But on the performance side its definitely worth it. On the cruiser/weekend car its not worth it.... 🤔🤷‍♂️

The electric suspension is completely different as it has a separate computer/controller for the struts themselves. I believe oems are still available for sale through infinity retailers but you can definitely replace any electronic suspension for coilovers or oem non electronic suspension. Ride quality will differ dramatically between setups.

yes you can get rid of it for Q45s y33 chaisses us 240sx s14 camber,toe,traction arms, s14 subframe bushings 240sx s13 or s14 rear knuckle bushings, 240sx s14 rear sway bar bushings, coilovers id go with partshop max or bc coilovers extreme lows 99 nissan maxima ball joints gktech 240sx 65mm front lower control arms s13 or s14 240sx rack n pinion bushings , S14 tension rods angled ones not straight because if your gonna run wide wheels you neeed the bent ones any brand you feel for and there you go also add a s14 rear toe brace from gktech

sorry for the very late reply. check out this post for the most accurate information. forums.nicoclub.com/let-s-talk-97-01-q45-y33-suspension-t629802.html#p6842745

for Q45s y33 chaisses us 240sx s14 camber,toe,traction arms, s14 subframe bushings 240sx s13 or s14 rear knuckle bushings, 240sx s14 rear sway bar bushings, coilovers id go with partshop max or bc coilovers extreme lows 99 nissan maxima ball joints gktech 240sx 65mm front lower control arms s13 or s14 240sx rack n pinion bushings , S14 tension rods angled ones not straight because if your gonna run wide wheels you neeed the bent ones any brand you feel for and there you go also add a s14 rear toe brace from gktech iremmend all gktech