Part 3 - Honda Crank Bolt vs DeWalt DCF900 Impact Wrench...Who Wins? by

Рет қаралды 7,766

Күн бұрын

www.gettinjunkdone.com
Amazon Affiliate Links
DeWalt DCF900: amzn.to/45abRk9
Weighted 19 mm Crank Bolt Socket: amzn.to/44LQ2Ym
Please comment, like, subscribe and share!
You can also fine me on Twitter & Instagram - @GettinJunkDone
Use this link to shop on Amazon, while supporting the channel!
www.amazon.com/shop/joerobins...
Bugout Truck Build: • Bug Out Truck Build by...
Tool Reviews: • @GettinJunkDone Talks ...

Пікірлер: 44

@TheDisgruntledMechanic 11 ай бұрын

never ever anything wrong with buying more tools especially if it does the job! Awesome Joe!

@GettinJunkDone 10 ай бұрын

I'm sure I'll find an excuse to buy something else new again soon! 🤔

@gergemall 10 ай бұрын

Ditto ❤

@SunsyloSouvannaraj-rh6zm 24 күн бұрын

Yep I’m about to order this Dewalt impact wrench to loose up the crank bolt on my son 2005 civic so I can change the water pump and timing belt it a pain in the ass ✌🏽

@mikekahotea8148 8 ай бұрын

Ha ha ha " you gotta be kidding , it came right off " 😊😊😊 awesome bro

@brokentoolgarage8609 11 ай бұрын

Nice! I am glad you got that done!

@GettinJunkDone 10 ай бұрын

Oh, me too!

@mikekahotea8148 7 ай бұрын

Well done joe friggin awesome 👍

@madangel2002 4 ай бұрын

Just bought this impact, I’ll be using it on a daily basis for groove fittings

@smsauce 11 ай бұрын

Congrats!!

@GettinJunkDone 10 ай бұрын

Thanks!

@balsqueak 11 ай бұрын

Dewalt has been absolutely killing it with their new lineup last couple of years. Looking to trade my trusty dcf899 for the 900 these days. Got the new dcf921 atomic compact a little while back and it pretty much instantly became my go to. That little guy is a total beast. Gets me through most of what I face. But the 900 would get me through everything else without having to bust out the air. If you slap a 6AH, or higher, battery on there it offers quite a bit more punch to them (and most Dewalt tools also) as the larger batteries are able to discharge better and handle the peak draw of the tools. Their powerstack does very well at this also, even just 2AH onebwhich is what I use mainly on the compact to keep it compact. Very awesome tools Dewalt is coming out with these days.

@GettinJunkDone 10 ай бұрын

I agree with everything you said and that is exactly the same approach I plan to take when the Ryobi impact does! Thanks for the input!

@colincoombes5883 5 күн бұрын

Try the 961 lot more powerful

@bgs4896 2 ай бұрын

Man I'm glad I got it 😊

@HammerWrench 11 ай бұрын

I hoped you would leave that frustration as a small memory. Great job. Great tool.

@GettinJunkDone 10 ай бұрын

Absolutely on both counts!

@gergemall 10 ай бұрын

Thx ❤

@sherrischneider2794 2 күн бұрын

It's not the impact wrench but the heft of the socket. Your old impact wrench would probably have worked.

@theunknownone5663 5 ай бұрын

Having the dewalt save a lot of time and money. You do have to worry about busted hands. Back pain and therapy do to anger issues because we all know Honda crank bolts will test any and everybody who dealt with them.

@colincoombes5883 5 күн бұрын

If you think the 900 dewalt impact wrench is good then you will love the 961 it's the flagship of dewalt and is a lot more powerful than the 900.

@franklinwalker9606 9 ай бұрын

Oh yeah for the 900 dewalt this bolts are candy

@jtg2259 4 ай бұрын

Shoot they have the 1700ftlb dcf 961 now!!! Dewalt has the market on the high torques

@diazaa 3 ай бұрын

How much in and out play does your anvil have?

@-_Ismael_-1 9 ай бұрын

I am in same situation you were in with the crankbolt. Got a honda accord 1996 and we tried everything from heating to using breaker bars broke few extentions and heating it for more than 30 minutes no luck yet i am getting ready to buy the same impact gun and hope it work. Or else i dont know what to do. 😕

@-_Ismael_-1 9 ай бұрын

Map pro oxygen tourch did the job not even the DeWalt could do it

@drobinson9068 11 ай бұрын

That was easy!

@GettinJunkDone 10 ай бұрын

It was with the right tool!

@MarcMorris-wp7ie 11 ай бұрын

The Ryobi for the price does good....honda and transporter crank bolts always a favoirite😂😂

@GettinJunkDone 10 ай бұрын

Yeah, it's a good little tool. I've had it for years and it's still going strong.

@backwoodsbungalow9674 11 ай бұрын

Wow, finally success. 😀 I wonder if soaking with penetrating oil helped. 🤔

@kimlground206 10 ай бұрын

The penetrating oil probably didn't do much, especially if, as I suspect, Honda uses threadlocker on that bolt. I wonder if anyone has read the Honda service manual on this. If it has threadlocker on it, a light application of the blue wrench to the head of that bolt would probably have loosened it right up.

@GettinJunkDone 10 ай бұрын

Who knows at this point, I'm just glad it's over!

@Comm0ut 7 ай бұрын

@@kimlground206 That bolt is long and goes deep so getting the inner area hot enough to thaw anaerobic locking compounds could be challenging (and in many salvage yards they won't let ya bring a torch). I do bring a full-sized cutting torch with an oxy-LP tip and an adapted disposable LP cylinder along with a small oxygen cylinder where I can though.

@Kevin-is-here 11 ай бұрын

You’ll get your money out of that impact, sometimes it pays to just walk away 😅

@GettinJunkDone 10 ай бұрын

Looks like I already did!

@92174164 10 ай бұрын

Umm, or buy a 30 dollar Honda Crank holding tool, then use breaker bar .....

@GettinJunkDone 10 ай бұрын

Tried that.

@92174164 10 ай бұрын

@@GettinJunkDone ,come on man, how many actual days removing a crank bolt,2or 3 weeks😳😳 .. I worked as a tech 15 years at Montgomeryville Acura , ... Getting a crank bolt out was the least of our problems, it can always be done with a holding fixture and a large breaker bar..(.I hope u sell a lot of impact guns and weighted sockets 😅

@GettinJunkDone 10 ай бұрын

@@92174164Well, I eventually got it and now I have a new impact. I'm happy how this turned out.

@92174164 10 ай бұрын

@@GettinJunkDone 👍

@Comm0ut 7 ай бұрын

The impact is insanely useful elsewhere too like pulling parts in salvage. I bring my DCF 900 when LS hunting along with their 60V recip saw for the frame tubes. Works a treat.