Part 4 of 4 Harbor Freight Tire change tool upgrade; Lucid AutoWerks

Рет қаралды 410,535

4 жыл бұрын

This video demonstrates how to use the Harbor Freight Tire change tool upgrade; Lucid AutoWerks
This tool will also be offered soon on rennfix.com as the Blue Wolverine for $195, stay tuned.
My book "Your Car Care Companion" - amzn.to/2QXRbIc
Beadbuster Tire mounting lubricant paste - amzn.to/2WRRQyo
Mod for tire changer - lucidautowerks.com/products/u...
Manual Tire Changer - amzn.to/2JXblyc
Thank you Donations - paypal.me/snapple69
Here's a free copy of my book in pdf down load from my drop box!
www.dropbox.com/s/mcwpv0rb7lu...
Ru Glyde Tire Mounting Paste Pail 8 lb - amzn.to/2RzGHiz
Yellow Thing Tire Tool - amzn.to/3avQyxs
Red Mount Duck Head - amzn.to/3dHKy6E
Manual Tire Changer - amzn.to/2UXocqC
amzn.to/2UXocqC
Tire iron set - amzn.to/2WRm7Oh
Tire Repair Kit - amzn.to/3aurRBF
Heavy Duty Tire Repair Kit - amzn.to/3dFQWeN
AT-205 - amzn.to/3dHzgj1
Engine Restore - amzn.to/3dFDY0B
Kroil Penetrant oil - amzn.to/2UKp2Wp
Marvel Mystery oil - amzn.to/3bNRZHZ
Blue Devil Oil Stop Leak - amzn.to/2WRb6fT
Ingersoll Rand Cordless Impact - amzn.to/2UILjDU
Best Wheel Chocks (Small) - amzn.to/39rcKav
Best Wheel Chocks (Medium) - amzn.to/2QVYRdY
Aluminum Jack Stands Pin - amzn.to/2yfxZiF
Aluminum Jack Stands Lever - amzn.to/2QXqe7F
Best Rubber Gloves - amzn.to/2WVlfs4
Aluminum Floor Jack - amzn.to/2QTQHDe

Пікірлер: 286

@Engineerboy100 4 жыл бұрын

This tool will be offered soon on rennfix.com as the Blue Wolverine for $195, stay tuned. The kit will include: 1. One Blue Wolverine Poly centering cone 2. The duck head 3. Top and bottom collets 4. Upgraded Aluminum tubing 5. Power Coated finish 6. Two High quality Blue Wolverine poly knobs 7. All complete for $195.00!

@Zupdood1 2 жыл бұрын

This link shows it as ‘coming soon’?

@evan6021 Жыл бұрын

@@Zupdood1 yup. Two years later looks like he never finished

@heavyhitta6839 9 ай бұрын

Now what? 🤷🏽‍♂️

@wookongninja7461 3 жыл бұрын

I like the satisfying bounce sound at the end of the newly replaced and inflated tire.

@Engineerboy100 3 жыл бұрын

lol me too :)

@phigolden2706 3 жыл бұрын

This is awesome. Also note "No scratches no nothing" while he dings the rim with the bar.

@lindafoxwood78 4 жыл бұрын

Very nice video. You look like a pro with that thing. I'm going to get one to rotate my tires inside to outside to increase my tires life. My tires usually wear on the inside tread only. Thanks.

@guarenchafa4912 3 жыл бұрын

sounds like you might need a wheel alignment or you have worn out tie-rod ends.

@maxwellspeedwell2585 3 жыл бұрын

Nice!! So much easier than the stock H.F. tool!

@Engineerboy100 3 жыл бұрын

Yep!

@joesanchez4895 3 жыл бұрын

Way better on the alloy rims, thanks so much for the share!!!

@Engineerboy100 3 жыл бұрын

Yes, for sure much better on the rims, and my Blue Wolverine kit will be even better because the centering cone will be solid plastic instead of metal.

@olenaerhardt7725 2 жыл бұрын

What a useful film! I did my 5th tire today and when putting a new tire on needed to watch some more details: I forgot that the whole Duck Bill (head and tail) should be above the tire. For some reasons the tires I have don't go on without a Yellow Hand. It is R16 tires. I even don't know if I'll be able to change R15 (we have on one car those (2001 Saturn SL2)). Thank you and Bless your heart, Sir!

@alansunday 4 жыл бұрын

Awesome video! I just bought the Harbor Freight tire changer and didn't even know this duck bill was available! Will be buying that next! Thanks for the video!

@Engineerboy100 4 жыл бұрын

coming soon to rennfix.com, as the Blue Wolverine!

@alansunday 4 жыл бұрын

How soon is soon lol. Preorders available?

@alansunday 4 жыл бұрын

@@Engineerboy100will it be able to handle up to a 20 inch rim?

@patrickjohn9091 Жыл бұрын

Way to go Clint! I have been changing my own tires for years! I think you invention is awesome! I would like to see you do a video of changing a tire on newer 4runner TRD 5th gen wheel.

@UPdan 2 жыл бұрын

You do make a good point of trying to find multiple uses for things. Especially since mine is cemented down.

@Engineerboy100 2 жыл бұрын

@citrinwarren6073 2 жыл бұрын

Great demonstration. Keep it up.

@gergemall Жыл бұрын

Thx Clint . Glad I found you.

@LordDeadSpider 3 жыл бұрын

This is awesome. After changing the tires on cheap steel trailer wheels there was no way I was going to attempt the good wheels in my car. I might have to get this addon.

@Engineerboy100 3 жыл бұрын

I'm almost ready to release the Blue Wolverine, my version of this tool more $195.99

@JohnnyAnderson1 3 жыл бұрын

@@Engineerboy100 I would buy it now

@JH-zi7fq 2 жыл бұрын

Great attachment, the Tire Changer apparatus should actually include such a mechanism, instead of only having the Prow Bar's own end to make the same effect.. Plastic will break easily, so remember to not use extreme force and change things around instead of applying more force when stuck in the process

@bbjagaa 3 жыл бұрын

Nice extension to the harbor freight tool

@nvmcrider8475 4 жыл бұрын

You make it look real easy. Appreciate the steady camera shot and the extra tips for doing this. Do you have a video on balancing them?

@Engineerboy100 4 жыл бұрын

I do have a video on balancing, there should be a card for it at the end of this video. It's my earlier video of me using this same tool before I added the modification. Thanks for the kind words. I will be making this mod soon for $195 it will be called "The Blue Wolverine" coming soon ;)

@eleanordeboat4191 4 жыл бұрын

When putting the tyre on, as well as ensuring the bead at the far side of the tyre is in the well of the rim, it is easier if you feed the bead of the tyre over the top of the bump at the front end of the duckhead and under the rear duckbill. Also lube the duckhead. When you were rotating the duckhead the it looked like the bead was being pinched between the front bump and the rim. Some duckheads do not have the front bump and seem a bit easier to use when manually mounting a tyre.

@Engineerboy100 4 жыл бұрын

Thank you for that tip, I will try that and if it works I will use it in my next video about tire changers.

@JH-zi7fq 2 жыл бұрын

Well about the pinching, some of that will ALWAYS happen when mounting a tire to a rim.. You cant avoid all issues with tire mounting since the design gives consequences

@VarandMusic 11 ай бұрын

As a former tire guy myself I cringed when I saw the bead wasn't over the duckbill as PTSD from ripped beads came back. Great advice.

@HerreraCam 3 жыл бұрын

Thanks for this!

@Engineerboy100 4 жыл бұрын

I will be offering these soon for $195.00. They will be powder coated and the material has been upgraded to aluminum they are going to be awesome and they will be complete only need to attach the duck head and install on your harbor freight tool. coming soon to my channel and my website, rennfix.com they will be called the "Blue Wolverine".

@guarenchafa4912 3 жыл бұрын

What happened to these Clint? I can't seem to buy one on the website.

@andybatchelor3321 2 жыл бұрын

Are they for sale yet

@loramason3399 4 жыл бұрын

What if you went counter-clockwise to install the tire? Also, put your big bar inside the square arm. Twice the leverage.

@zoolanderfred Жыл бұрын

Well done sir. Good demo.

@tbrinkley112 10 ай бұрын

NICE!! I really need to replace my HF one. It does have the duckbill.

@russellcollier1599 10 ай бұрын

Nice videos sir. Your video has convinced me to make one of those.

@Engineerboy100 7 ай бұрын

Go for it!

@longho7257 4 жыл бұрын

Good presentation!

@marichuorallo3427 3 жыл бұрын

How much the plastic remover

@bambam0099 2 жыл бұрын

Thanks for the video!

@arlendavis 5 ай бұрын

Great Video!!

@heiwei8726 2 жыл бұрын

Best idea Bro

@jamescapodanno1861 4 жыл бұрын

good video!

@CzMnHD 4 жыл бұрын

I just made this whole thing myself 5x stronger and took 3 hours to weld pieces from junk metal. Only thing I bought was that mount on and off thingy from ebay 17 bucks to my door. Would recommend building similar manual tire machine on your own. Prices are ridiculous.

@Engineerboy100 4 жыл бұрын

Sweet! That is so awesome that you can do it yourself, there are a lot of guys/gals who want one but don't have the tools and or skills to make their own. I'm working on a design that will be 1/3 the price and work very well. videos coming soon!

@curryhousechicken 4 жыл бұрын

Clint Hightower...sell them at an affordable price. Don't bother painting it.

@JohnnyDub16 3 жыл бұрын

Very interested in the blue wolverine project. The $200 price will make importing one to Ireland cost effective. Is it still going ahead? Cheers!

@fsilva4ever 2 жыл бұрын

awesome video

@sonnyblazer5504 3 жыл бұрын

OK, you got me & I'm subscribed. What are you a Human Machine? You really popped that tire on. I been doing tires since the '60s and hard thing today is rim sizes being too big and almost no flex in the skinny sidewalls. I have a couple COATS Tire Machines but can't clamp the tire over the center shaft. You do much better by hand with the new attachment you showed us. I'm impressed and it looks like that thing will slide outward to larger wheel sizes. Thank you! Sonny (CT)

@Engineerboy100 3 жыл бұрын

Yes Sonny, I will be offering a much better and less expensive version soon on my website rennfix.com called the Blue Wolverine!

@PawOfRizzo 4 жыл бұрын

Nice tool

@okieiam7236 3 жыл бұрын

Awesome 👍

@alfonzacorn 4 жыл бұрын

I want to see you put a low profile tire how does that work

@smattext 4 жыл бұрын

I'm really sorry Clint I think that upgrade tool works good! but i decided to buy the no mar tire changer I paid more money! but in the long run I think it will hold up much better then the harbor freight tire changer. I just think the harbor freight is really cheaply made, I have two cars and two trailers that i will use it for so eventually it will pay for itself by saving so much on mounting and balancing

@ginsengjin 4 жыл бұрын

Cool but not going to pay 429 dollars for an attachment. I'm gonna wait for a 20 dollar Chinese knock off.

@Engineerboy100 4 жыл бұрын

Yeah, I hear ya, the price doubled from when I got mine. I talked to him about lowering the price but he said it's too much work to be making so many of them ... :(

@pastorjustin4181 4 жыл бұрын

@@Engineerboy100 he might oughta take learnin from Henry Ford assembly plant. Expedite service/labor 😂😂😊😎😎

@momo-yz4lu 4 жыл бұрын

Same here please lmk when ya do. Thanks

@accuratealloys 4 жыл бұрын

If you can weld you can make your own for less than $50.

@paulg444 3 жыл бұрын

@@accuratealloys I'd like to get a copy of the dimensions of the pieces

@mypastimeproject6066 4 жыл бұрын

I would recommend building similar attachment on your own

@Engineerboy100 4 жыл бұрын

Yep, that's exactly what I'm in the process of doing, and I'll be offering it for a lot less.

@bm-rf4bc 3 жыл бұрын

@@Engineerboy100 Reach out when you've done it.

@piecetoyou8285 8 ай бұрын

Dude , Just some advice ` you used the duck bill wrong to put the Tyre back on, When removing the Tyre you lift the Tyre over the duck bill head while the other end is over the Tyre, But when your putting the Tyre back on , you need to have the Tyre over on top of the other side from the duck bill. and the duck bill on top of the Tyre, this is why the Tyre was struggling to go back on easy, and don`t be shy with the soapy stuff,

@Bird76Mojo76 4 жыл бұрын

FYI for anyone fabricating one of these improvements to their Horror Fright tire machine, if you're planning on removing wider, mud style tires, think of the width when cutting your center pivot tubing to length. I made mine 12" I believe and it's not high enough to remove a 10.5 wide tire.. Time to rebuild it. V2

@sidepipechris1 2 жыл бұрын

Any build materials list?

@Bird76Mojo76 2 жыл бұрын

@@sidepipechris1 I didn't keep track. Sorry. Though it's a pretty easy piece to copy based on pictures alone.

@organogardener9210 Жыл бұрын

@@Bird76Mojo76 Thank you very much for your great suggestion here. Please kindly tell me more in another way what is the "center pivot tubing "? Thanks in advance.

@giuliobenitez2229 Жыл бұрын

Wow!! Ty.

@jeremygourde9880 Жыл бұрын

Literally just Bought a horror freight manual tire changer 2 days ago to change a set of 31x10.50r15’s out to 34x10.50r15’s. By the second tire the bead breaking foot was bent & had to be reinforced with 2” square stock. By the time I got to the 3rd tire bead broken the bar is bent and the holes for pins are tearing out of the bead breaking arm & the mounted base is bent and pulling/tearing the strike anchor holes. Hopefully it’ll last to finish the 4th tire. Granted I didn’t expect anything from harbor freight to last, but I figured it’d last at least a set of tires.

@Engineerboy100 Жыл бұрын

You're definitely not using it correctly if that's your result. I don't use the bead breaker. I use tool with my impact wrench, works great.

@Engineerboy100 Жыл бұрын

kzfaq.info/get/bejne/otthir2Aq66qdo0.html

@rickl6697 3 жыл бұрын

At the very end when you said why it so tight. I don't know for sure but I think you had too much of the tire bead on top of the duck bill. Saw another video and he only had it over the duck bill part not both of those bumps. How much was the upgrade? Thanks for sharing.

@Engineerboy100 3 жыл бұрын

Thanks for the tip. The upgrade is too much that is why I am making a much less expensive version that will cost less than half the price of this one.

@braderrick 3 жыл бұрын

Are you getting close on your version of this yet? I haven’t got one yet and I’m anxious to see yours before I buy or try to make one.

@Engineerboy100 3 жыл бұрын

I am getting close and will be producing them soon. I have gotten a lot of interest in this part and really need to be able to crank them out once released so as not to make people upset with long wait times. I am streamlining the manufacturing process and coordinating my materials suppliers and my tooling sequence in hopes of being able to deliver the product promptly once people pay their money.

@larrybuckner4827 Жыл бұрын

Hi Clint how have you been doing? What is the site to buy that tire changer

@stanleymuranda4675 4 жыл бұрын

I want to try make one also

@olenaerhardt7725 2 жыл бұрын

That protective washer (@ 1:11), which is under the tire cone, when you remove the cone, what it is made from: is it from wood or some plastic? And also if you use that tire cone, do you need to protect the rim anyhow? I have HF Tire Machine and the attachment to it (Manual Tire Changer Swing Arm Mod with Duck Head fm/ebay). The attachment I have doesn't include the tire cone, so not sure if I need to buy one. Thank you for the great film, especially for showing in details how to apply the DuckBill.

@Engineerboy100 2 жыл бұрын

The washer is made of wood. I will be offering the entire kit soon AND it will be made of aluminum and I will be offering the cone separately if needed and it will be made of plastic. The washer goes under the rim, the cone goes on top....

@olenaerhardt7725 2 жыл бұрын

@@Engineerboy100 Thank you. I have wood of that thickness, so might try to make one w/Jig Saw in the future, for right now I'll use just some rugs or cardboard. Yes, I think it would be very helpful if someone could make a set of plastic cone and that cut disk (which is currently wooden). Aluminum disk would be more expensive I guess. Thank you again, I'll be using your film to install my first tire.

@raulviera7609 4 жыл бұрын

I would get one in a heart beat, but when I saw the price my heart skipped a beat! I understand the manufacturing issues and all that. However, the main thing is to somehow make the price attractive to the consumer. For $500plus, after tax and shipping, it’s not worth it. Keep In mind, you can get a used professional tire changing machine for a couple hundred more. Also, the regular tree shade or home garage mechanic, would be pressed to invest that amount of money just to change a tire a couple times a year. If you can find the way to lower the retail price, I am sure it would sell big time. I would be the first to purchase it! Nice job in the video and the product. Good luck and thank you.

@Engineerboy100 4 жыл бұрын

This is not my product ... yet, I have approach the original designer and offered to help him make is manufacturing process more efficient so he could lower the price but he said he was not interested. I have been considering making them myself. My price would be $195.00. That's a little lower than the price was when I bought mine.

@Engineerboy100 4 жыл бұрын

@@goodday-zy2br I have decided to offer a slightly improve version of this design, coming soon to my website, rennfix.com. It will be called "The Blue Wolverine".

@Engineerboy100 4 жыл бұрын

@@goodday-zy2br This would be excellent for road assist repairs, all you would need to add is a 1" thick board to mount it on in the field, maybe with a hinge in the middle for storage on vehicle and you'd be good to go!

@BAT-man... 2 жыл бұрын

Anyone ever try reverse-mount wheels on this thing? I have not had good luck with those.

@UncleRobsGarage 3 жыл бұрын

Thanks! You explained that ,so well my adhd got it!

@Engineerboy100 3 жыл бұрын

lol Thanks Old man, I'm an old man too lol :)

@rgknowlton1 4 жыл бұрын

Can you put the bar in the end of the square tube on the Autowerks part to get more torque and keep the bar completely out of the way of the tire?

@Engineerboy100 4 жыл бұрын

You could if you wanted to.

@ptaweston 4 жыл бұрын

The guy who designed it, a KZfaqr himself, puts it in the end of the square. You can find his video on KZfaq where he designs this and uses it. He used to sell them for $279.00. Now he's selling them for $429.00. After you add the cost of the bead keeper tool, plus the harbor freight tire changer, you're $500.00 in. That's a lot for a DIY'er doing this every 3-4 years. Walmart charges $15 per tire and includes lifetime balance.

@dublindave5795 3 жыл бұрын

@@ptaweston $15 per tire IF you purchase tires from them. Add $10 per tire if you bring your own. That is $25 a tire if you bring your own tires.

@jorgemelendez9546 4 жыл бұрын

But how whit this tool separate from rim?? When he started it was already separated from rim!!!!!!! Then what it’s????maybe on the video before I dint watched it anyway good video good

@AlexanderGarcia-mp3lb 3 жыл бұрын

If you see the video the machine have a piece of pipe handle half way with that piece of pipe and other part he use to separate the tire my nephew have one

@Engineerboy100 4 жыл бұрын

Here is a free copy of my book. Check out the Trouble Shooting Chapter especially, down pdf from my Dropbox. www.dropbox.com/s/mcwpv0rb7lun038/0%20Entire%20book%20with%20covers%20and%20QRC%20for%20eBay.pdf?dl=0

@paulg444 3 жыл бұрын

Clint , great video. Unfortunately Im seeing a 400$ price for that addition, I should just buy a higher end tire changer.

@Engineerboy100 3 жыл бұрын

I will be offering mine for $195 soon it will be called the Blue Wolverine and will be on my website rennfix.com as well as eBay. it is portable and I will be demonstrating how to make a portable platform to us it on where ever you go.

@dumbeezy5480 3 жыл бұрын

@@Engineerboy100 any updates?

@larrybuckner4827 2 жыл бұрын

Hey Clint I tried to order the blue wolverine I think something is wrong with the site

@Engineerboy100 2 жыл бұрын

Not available yet, I'm working on mass production.

@vanotright9974 3 жыл бұрын

Nice add on! But for 429.99 or for that matter 195.00 I can get 4 tires mounted and balanced with out all the manual labor!

@Engineerboy100 3 жыл бұрын

I consider the manual labor exercise, ... a good thing. I don't mind at all and even enjoy it. If you think manual labor is a bad thing, I feel sorry for you.

@momo-yz4lu 4 жыл бұрын

How much for the kit

@johnbaptist7476 2 жыл бұрын

Hello friend where can I buy those duck attachment please . Thanks for responding ♾️

@Engineerboy100 2 жыл бұрын

They are on eBay.

@christopherdekonstrukt444 Жыл бұрын

The days of BYOT (bring your own tires) are pretty much over. Practically all the shops in my area won't install tires customers bring in, you have to buy your tires from them and have them installed same visit. Of course they will upsell you on new tire pressure sensor valves, citing liability issues if you don't want or can't afford them. If you don't let them change your valves, they won't mount your tires, even if you do buy from them. If you buy tires from them and leave the store without mounting them and bring back another day, they won't install them. Period.

@davidfrank2824 4 жыл бұрын

Let me ask you what are you putting in your water bottle and how much of it are you mixing with it? I very much enjoyed your videos on this. As soon as all this virus is over with I'm going to order that kit for myself. Right now most places are not shipping anything out. I tried yesterday on eBay and Amazon to restock all of my carburetor parts kit stop for working on lawn mowers and weed wackers. It's just a little something I do on the side. I tried all my regular places first and they all told me they could not ship anything that they don't have the people there to do it. So now I'm going to put this on my list of things to pick up when things get back to normal. That kit really made a huge difference on the way you were able to mount and dismount your tires. Look forward to seeing more of your videos.

@Engineerboy100 4 жыл бұрын

I plan to do a video soon to ask my viewers if they would be interested in this mod if I started making it and offering it for $195.

@clinthightowerclinthightow4950 4 жыл бұрын

I put a few drops of dawn liquid soap.

@georgeroberts613 2 жыл бұрын

Going back on, you need to sue the nubs just like taking it off or you risk ripping the bead on the rim edge.

@jorgedavila8222 2 жыл бұрын

Donde puedo comprar los asesoreos

@Travcity1 4 жыл бұрын

Do you think that will work on ATV tires or is the duck bill to big? Thanks

@mesanders1113 4 жыл бұрын

It maybe to big I typically do atv tires by hand pretty easily. It depends on the rim size of the atv as well.

@Engineerboy100 4 жыл бұрын

The duck head slides in and out to adjust for different size wheels. If the wheel is not too small, it will work well.

@jingjong1298 4 жыл бұрын

Where can I get that new attachements?

@Engineerboy100 4 жыл бұрын

Coming soon to rennfix.com, as the Blue Wolverine.

@bryanhowell6329 4 жыл бұрын

Is your blue wolverine available to purchase yet I see it on rennfix says coming soon but also says you can buy it now? When you thinking it will be available to purchase?

@Engineerboy100 4 жыл бұрын

I am working on all the production tooling and the manufacturing processes to provide an even better unit than this one. My unit will be complete with cone AND duck head and be made out of more expensive aluminum material. I can't give an exact date yet but they are coming and when I'm ready I will be posting several videos everywhere, KZfaq, Facebook, Instagram, twitter, my website, don't worry, once they are out, you will know.

@samsamson1414 3 жыл бұрын

Clint Hightower taking too long over 7 months now

@johnbaptist7476 2 жыл бұрын

Hello friend I have the old one not like yours which is make the life easer off course .where can I buy just like yours . Thanks for your response .😇 + 🕯 ❤💜 ♾️ 🍃 👌🙏👍

@iwillnotcomply7145 3 жыл бұрын

Did you give up on this project Clint?

@lennoxcooper3881 11 ай бұрын

What size diameter is the duckvile pipr

@Engineerboy100 10 ай бұрын

I think inch and a half.

@wreckerman4691 3 жыл бұрын

How do you break bead down with that machine

@Engineerboy100 3 жыл бұрын

kzfaq.info/get/bejne/otthir2Aq66qdo0.html

@sportice5051 3 жыл бұрын

Hello my friend could you communicate the size of the different tubes en France it's not possible to buY it

@Engineerboy100 3 жыл бұрын

I'll draw you up a dimensioned sketch, send me your email and I'LL Send it to you, I may make a video of those dimensions too for others. my email is clinthightower@yahoo.com

@sportice5051 3 жыл бұрын

@@Engineerboy100 thank you my friend email sent

@heavyhitta6839 9 ай бұрын

Funny how the tire changer is cheap from $60 to $80? But the actual smaller parts that REALLY help you are $399! 😂 I just checked on them now in 10/16/23 and that's what it's going for. This is 3 year's already.

@ksavage681 6 ай бұрын

You can get the whole set for 95.00.

@rambocall9300 4 жыл бұрын

i will not pay that price either when i only paid $42 for the main unit

@arlynheimdal1413 4 жыл бұрын

I guess that makes my $40 May tire machine look really good compared to manual labor

@ddeter888 3 жыл бұрын

How soon you anticipate these being available?

@Engineerboy100 3 жыл бұрын

I'm hoping I'll be ready to release to market in the next 90 days.

@mten8965 4 жыл бұрын

👍😎

@fredrickburwell3920 2 жыл бұрын

great video is your setup mounted to concrete or plywood

@Engineerboy100 2 жыл бұрын

I mount it to both. This one is on concrete but I recently made a video with it mounted to plywood.

@cawmseejlis9738 3 жыл бұрын

Great! good job bro! Save $80.00 to $120.00 for set of 4 tires mount/balance. Save my family 10 years $12,000.00 we have ten cars

@thewishmastur 3 жыл бұрын

It’s only $20 per tire for mount and balancing in Canada. Not sure about the US.

@robperry3404 3 жыл бұрын

where did you buy your upgrade for your tire changer ?

@robperry3404 3 жыл бұрын

thank you

@agustinflores5636 3 жыл бұрын

Where did you get the Duck Head attachment?

@Engineerboy100 3 жыл бұрын

The red duck head came with the kit, It will also come with my kit, the Blue Wolverine.

@thewishmastur 3 жыл бұрын

You can buy it from Ebay.

@tonychandler8908 4 жыл бұрын

Were did you get the kit for the tire changer

@Engineerboy100 4 жыл бұрын

I will be offering them soon as "Blue Wolverines" on rennfix.com

@melvinjohnson7981 3 жыл бұрын

Way too expensive!

@joshuaberman8420 3 жыл бұрын

How long till the Blue Wolverine is available?

@Engineerboy100 3 жыл бұрын

Don't hold me to it but I'm shooting for 90-days now.

@peterford9369 3 жыл бұрын

Did the price go up due to duck bill and hardware?

@Engineerboy100 3 жыл бұрын

Not yet.

@michaels9926 3 жыл бұрын

How do you get off the bead?

@Engineerboy100 3 жыл бұрын

kzfaq.info/get/bejne/otthir2Aq66qdo0.html

@markthompsoncpa 3 жыл бұрын

How do U balance them?

@Engineerboy100 3 жыл бұрын

For balancing to to 20:08 of this video kzfaq.info/get/bejne/bdapg7KclrDXl3U.html

@samdorsey4590 4 жыл бұрын

OK THAT'S LOOKS GOOD, BUT THE HARDEST PART OF DISMOUNTING A TIRE FROM IT'S RIM IS TO "BREAK" THE TIRE BEAD LOOSE FROM THE RIM, FRONT & REAR SIDE!!!! I NOTICED IN YOUR DEMONSTRATION VIDEO THAT BOTH BEADS WERE ALREADY BROKE LOOSE! SO MY QUESTION IS HOW DID YOU DO THAT?????

@andybatchelor3321 2 жыл бұрын

Are you guys still selling these and where's the website

@Engineerboy100 2 жыл бұрын

I will be releasing the Blue Wolverine version soon the website is rennfix.com

@aldonsoalvesdeoliveira1506 3 жыл бұрын

So do Brasil como faço pra compra uma dessa

@Engineerboy100 3 жыл бұрын

Once they are available, I will be posting several videos, you will know.

@johncrabtree6247 3 жыл бұрын

I just bought a tire changer for $29 with the 25% coupon that was sent out. How could I pay $195 for an add on. I can make my own for about $25

@Engineerboy100 3 жыл бұрын

Not everyone can cut tubing, weld and powder coat. If you don't want one, don't buy one.

@thewishmastur 3 жыл бұрын

I have done it for around $37.5 including the duckbill. Steel in Canada is very expensive. Never welded in my life before. It's not greatest welding job but it does the job. You can do it.

@65csx83 3 жыл бұрын

Good video of a well demonstrated product. However, there were times when you had music or other background sounds interfering with the dialog which I expect is important to the demo.

@Engineerboy100 3 жыл бұрын

Thank you for your comment, I will make sure the music does not interfered with the dialogue in my next video of my version that I will be made available much cheaper.

@izzzzzz6 3 жыл бұрын

Whats the red dot for?

@Engineerboy100 3 жыл бұрын

The red dot is a marker for getting the tire as close to being balanced as possible prior to being balanced.

@tatechasers2393 3 ай бұрын

my duckbill is shhht, I'm buying yours

@eddiet4708 4 жыл бұрын

$430 for the kit is a little steep though. like your video.

@Engineerboy100 4 жыл бұрын

I plan to do a video soon to ask my viewers if they would be interested in this mod if I started making it and offering it for $195.

@mikestencel4480 3 жыл бұрын

Spray some soap wateron the bead for lubricant

@jonathanbrown6904 3 жыл бұрын

Hi Clint... Whats the status? Been waiting. Thanks!

@Engineerboy100 3 жыл бұрын

Well .... I don't want to let the cat out of the bag too early, but I am still working on it, trust me, once they are available there will be videos and post everywhere ;)

@ZoneNP 3 жыл бұрын

@@Engineerboy100 I need this upgrade tool. Do you ship to Canada?

@BlockchainToTheFace 2 жыл бұрын

Did you say uclid?

@Engineerboy100 2 жыл бұрын

Lol 😆 yes I did smh

@bjarnieinarsson3472 9 ай бұрын

Kind of funny.. every video of this "machine/tool" the users forgot almost always at least one part of process. Some forget about to position the back end of tire in the deep groves.. some forget how to use the bar.. some scratch the tire with the cross fastener.. some don't use lube.. some don't use the whole bar for leverage, specially when "brake the tire".. etc.. etc.. This one forgot two things, on was to lube the tire and specially, the plastic cover.. it builds up resist-ants with the rim without lub, the other was to fasten the tire before the Luicid tool.