PART TWO: UNDERBED NOTCH AND REAR SUSPENSION

No video

PART TWO: UNDERBED NOTCH AND REAR SUSPENSION

Рет қаралды 3,323

Күн бұрын

In this episode i am building out underbed notches, and finishing the rear end on my c1500. Here is links to some parts used, and i will add more as i find them. Cheers.
Air Lift Air Bags: amzn.to/3HZUSrb
Vixen air filter: amzn.to/42JJSYr
Air Compressor: amzn.to/3OI08DD
Air Pressure Switches: amzn.to/48g22lC
Stainless Braided Brake Lines: amzn.to/49uoOHA
Parallel 4 link: amzn.to/42FgxP2
Air Lift Aluminum Air Tank: amzn.to/49bLHzT
Momentary Toggle Switches: amzn.to/3uzPOqj
Air Manifold Switching Valve: amzn.to/3OFGqbn
Digital Air Pressure Gauge W/5 Sensors: amzn.to/3SWtzo0
Air Fittings: amzn.to/3HTfzoG
Air Line Kit: amzn.to/49cyI0H
Grinding Discs: amzn.to/3U3oslf
POR15: amzn.to/3U9QQ5e
Rear stainless brake lines: amzn.to/3TZfntq
Fuel line kit: amzn.to/3Jt1kro
Fuel line clamps: amzn.to/4aEw6tt
Fittings: amzn.to/3QfoqFF
"As an Amazon Associate, I earn from qualifying purchases"

Пікірлер: 31

@sands3227 4 ай бұрын

Good lookin truck.nice paint

@Finding_Our_Way 4 ай бұрын

Fantastic paint! Thanks 😁

@raymondw7875 4 ай бұрын

I'm not one to splurge on new tools, but you need a plasma cutter in a bad way. Awesome build! I just found your channel and will be following along.

@Finding_Our_Way 4 ай бұрын

🤣🤣 thats funny, i stole this from my dad while hes in mexico, its so hard to make clean cuts. Maybe its not all user error after all😁. Thanks for following along ✌️

@GrizzlyWisdom 4 ай бұрын

This truck looks amazing. Great work. Can't wait to see more

@Finding_Our_Way 4 ай бұрын

Thanks a lot, she is definitely coming along. 😁

@ForidaKhatunSetu 3 ай бұрын

Great video

@Finding_Our_Way 2 ай бұрын

Thanks 😀

@ForidaKhatunSetu 2 ай бұрын

@@Finding_Our_Way I have been following you for a few days. Your video content quality is very good. But I noticed that, due to video optimization problems, the videos are not getting more views and subscribers. You need to fix it. Best wishes

@thatrebelboy48 4 ай бұрын

Bubba all you had to do to get your bridge height is measure the height of the bed brace. They sit on the frame rail and are tack welded to the bed floor 🤣 Also, you could’ve definitely went higher on your notch so that your axle had more clearance. Reklez’s under bed step notch is 2” between the top of the notch and the top of the bridge. Another thing, you could easily use a Tahoe fuel tank. They mount behind the axle where the original tire carrier goes.

@Finding_Our_Way 4 ай бұрын

Good point, threw me off having different height to the mounts front vs rear. And this was once a long box frame i shortened. Easier for me to visualize it with a string, exspecially doing this extensive frame modification. Rather not mess it up. If i built another one, im certain i would do it a lot faster and cleaner. ✌️

@Finding_Our_Way 4 ай бұрын

Didnt think of a tahoe fuel tank, but i did toss the idea of a fuel cell at the rear. Decided against it, as i dont want to change the fuel door. My diff is pretty close to the bed, havent tried to get a tape measurer in there yet, but not much lower it could go. And im trying to build this while fabricating all the metal myself vs buying kits. I enjoy the learning curve. I didnt study reckless ones or anyones. Making this up as i go along 😅

@thatrebelboy48 4 ай бұрын

@@Finding_Our_Way I completely understand bud! The truck looks killer with the colormatching and polished wheels. My personally, I’d paint the calipers white. So many people have black or red calipers. I think the white would look really good behind the polished wheels but would still stand out enough to tell it had the disc brake swap.

@Finding_Our_Way 4 ай бұрын

@@thatrebelboy48 damn man. Thats actually a killer idea. I wonder if i could find a high temp paint in white. I already got the red caliper paint. But your right, it is overdone. Ill see what i can find 👍💯

@thatrebelboy48 4 ай бұрын

@@Finding_Our_Way I know for sure VHT makes a white engine enamel!

@jmyrick2439 4 ай бұрын

your doing great work, awesome truck, just wanted to point out at 31:25 you have a screw in passenger back tire, hopefully you'll have it patched before you go cruse. I'm not sure if you already knew but yea nice truck keep up the nice work.

@Finding_Our_Way 4 ай бұрын

Hey, good eye for detail!! Yes i seen that too, its on the rather large "to do" list 😅😆 ✌️

@JasonsLabVideos 4 ай бұрын

NICE work man !!

@Finding_Our_Way 4 ай бұрын

Thanks Jason! :)

@rickallen9864 4 ай бұрын

Looks unreal. Love it

@Finding_Our_Way 4 ай бұрын

Thanks man, appreciate it! :)

@sioux3049 3 ай бұрын

GR8 JOB... i'd like the same on my 2000 ex-cab ... working man budget....

@Finding_Our_Way 3 ай бұрын

Thanks man. Nice, ya im definitley budget building this for material, but its taken a lot more hrs than i anticipated.

@MarshallSmith27 4 ай бұрын

My truck is as clean as your but my paint is shitty af 😂 It’s lived in Nashville and Central Alabama it’s whole life so to very clean. No rust at all except the cab corners which is very strange since I can’t find any rust anywhere else. I have a 5/7 drop and thinking about doing bags and a manual swap at some point. I only say all this because your truck looks almost exactly like mine. its white and it gives me hope that I will eventually take the time to finish it.

@Finding_Our_Way 4 ай бұрын

Right on man. They do look good in white. Bonus its not rusty, goodluck with your build!! They are fun to modify.

@jmyrick2439 4 ай бұрын

when you get the time custom exhaust just idea lol

@Finding_Our_Way 4 ай бұрын

Yes its definitely on my mind. I want to Tig a custom stainless setup. Im debating about LS swap, or turbo V6. I have a turbo and most components sitting on my shelf. That will be a next year decision anyways. 😁👍

@bajafishtaco 2 ай бұрын

Did you use an fittings for the airlines ? And mount the tank on the bed? Is there a video yet . I saw it in your shorts

@Finding_Our_Way 2 ай бұрын

I did us AN fittings with mesh braided high pressure lines. I just finished the truck and am driving it. Havent made a follow up video yet, been so busy. Soon. ✌️

@bajafishtaco 2 ай бұрын

@Finding_Our_Way cool that's what I'm doing for my air lines. All ptfe AN fittings and ptfe lines