No video
Patch Panel Installation to Home Network Rack | FS.com
Рет қаралды 15,397
2 жыл бұрынAfter hearing y'alls complaints for so long I have finally gone and got a blank patch panel and filled it with rj45 shielded keystone jacks! mwhuahahahaha. AND if that wasn't evil enough, I also have a shielded patch panel and none of the ethernet cables are shielded! You are welcome!
Like what you saw? Buy it with the links below!
Blank Keystone Patch Panel - bit.ly/3v7W19p
Keystone Jacks - bit.ly/3uOn2hN
Cat6a Patch Cables - bit.ly/3uNZPMF
Other stuff
SFP+ Modules - bit.ly/3L4xSao
✪Support the channel✪
www.amazon.com...
spxlabs.com/links
spxlabs.com/shop
ts.la/stefano66335
Visit
spxlabs.com
Chat
/ spxlabs
/ discord
#fs #fs_transceiver #networking
@FS.COM
@jackslater2096 2 жыл бұрын
It looks so much more clean now that you added the second patch panel. That is some good fine work you done.
@Alan.livingston 3 ай бұрын
Ahhh, one of those throw stuff everywhere guys. Always good for dramatic effect while unboxing stuff.
@SPXLabs 3 ай бұрын
It’s true!
@jfkastner 2 жыл бұрын
Good choice of music! And a well done video!
@SPXLabs 2 жыл бұрын
Awww 🥰 you are always so supportive!
@jfkastner 2 жыл бұрын
@@SPXLabs Well deserved! BTW when you cut off the excess copper strands on the side of the keystones - cover up the other equipment closeby ... I had some little snippets fly into the air vents below once and it took me forever to get them out, i have a towel in my toolbag for things like that
@SPXLabs 2 жыл бұрын
The real pro tip here
@jfkastner 2 жыл бұрын
@@SPXLabs lol I just hate to look for those little 'snippets', it terrified me seeing them going into powered switches underneath ... either getting a short or the fans fail ... Some Ubiquity manual i read (YES I DO) said to power them off & on for big changes, also to disable PoE on 'crossconnect' ports (from one switch to another, or uplink ports) ... guess that's for safety just in case your electrician screwed up and there's a voltage potential between those units ... I learned it the 'hard way' - always connect a good ground before anything else
@SPXLabs 2 жыл бұрын
I only do things safely when it’s not my own stuff. It wouldn’t be fun unless I triggered you guys or had you on edge. Like back when I had an iMac precariously placed on the edge of my workbench. Lol
@Red1Wollip 2 жыл бұрын
I use FS products and I love them. They make a great switch.
@SPXLabs 2 жыл бұрын
So far FS has been great for me. I’ve used their transceivers for a while now and they have been rock solid
@HuskySeoul Жыл бұрын
This will be my first patch panel. Thanks for the help. Just put an order in!
@SPXLabs Жыл бұрын
Sweet. Mines be great so far
@JasonsLabVideos 2 жыл бұрын
Hell yeah, drank my morning first cup of coffee and enjoyed this video ! Nice work Man !! Any way to move the front posts back 1-2 notches in your rack to move the equipment further away from the front door ?
@SPXLabs 2 жыл бұрын
It is possible to do that
@JasonsLabVideos 2 жыл бұрын
@@SPXLabs I'm sure yours is just like mine. Cage nuts x 4. Might be something to try hey ?
@ecu8r Жыл бұрын
Man I also loved the white Ubiquiti cables but after watching your video I'm inclined more to get those shielded ones in white. Well done my friend.
@SPXLabs Жыл бұрын
I think I like the more tradition style more.
@arturo_lugo 4 ай бұрын
Wait --how did you attach the cable management tray to the front of the patch panel? I just got mine, same as you, 2 separate pieces, but they won't click together as is. Should I brute force the tray into opening its clamps so the click on the panel? I was hoping you'd show how to fit those pieces together in your video
@SPXLabs 4 ай бұрын
I don't remember what I did, I feel like nothing was difficult with it as I don't really remember much of anything beyond switching over to it.
@GNRTV 2 жыл бұрын
I love monoprice cables! It's all I use in my 12U network rack!
@ShinyTechThings 2 жыл бұрын
Yes, it's overkill but you can so you should!🤓😎
@bb55555555 Жыл бұрын
After reading some documents on these server racks I ready they have to be grounded. 1. Did you do that 2. Where do you attach it to in your house?
@SPXLabs Жыл бұрын
Grounding can be a bit difficult but if and when possible I attach the grounding cable to the grounding pin on a NEMA 5-15. You can DIY it or buy one. For my home I don't believe the air is being statically charged by anything and there is a lack of carpet so I myself am not highly charged. So I don't ground my stuff because I believe it's not necessary. But if I did, I would just attach to the nearest grounding pin of a NEMA 5-15.
@bb55555555 Жыл бұрын
@@SPXLabs thanks
@jfkastner 2 жыл бұрын
Looks better and better!
@MactelecomNetworks 2 жыл бұрын
Great video, those jacks do not look fun to install
@SPXLabs 2 жыл бұрын
Well after seeing your fancy crimping tool for jacks everything seems inferior now
@johnknightiii1351 2 жыл бұрын
Why did you put a zip tie behind the Keystone jack? Does it help with something or is it part of the instructions?
@SPXLabs 2 жыл бұрын
It helps keep the keystone “locked” so there is no chance that the cable can be ripped out
@johnknightiii1351 2 жыл бұрын
@@SPXLabs thanks for the reply. That makes sense
@kernalrom Жыл бұрын
Great video!
@austinstallion8187 2 жыл бұрын
What size patch cables did you use?
@SPXLabs 2 жыл бұрын
0.15m
@steveanderson1779 2 жыл бұрын
Looks great, but for the same price I bought the official Unifi Patch panels to match my kit
@SPXLabs 2 жыл бұрын
Nice! That’s a hot item, I’m glad you managed to get one
@luckeemain 2 жыл бұрын
Name of cables ?? Link ?
@SPXLabs 2 жыл бұрын
store.ui.com/collections/unifi-accessories-cables/products/unifi-patch-cable-outdoor
@scubieman 2 жыл бұрын
sweet baby jesus!
@SPXLabs 2 жыл бұрын
I thought you stopped watching
@scubieman 2 жыл бұрын
@@SPXLabs Never. Actually I watch what is related to me
@SPXLabs 2 жыл бұрын
That's a good policy. I feel like I've deviated heavily from what I have traditionally done.
@scubieman 2 жыл бұрын
@@SPXLabs Remember, Its not you, Its me. but great content either way
@TechySpeaking 2 жыл бұрын
First
@andyk9685 Жыл бұрын
WOW 12cm long patch cable 🤮🤮🤮🤮🤮
@andyk9685 Жыл бұрын
SPX Labs : „It’s longer than your penis” - A very professional answer. Really? Is that all you have to say?
@SPXLabs Жыл бұрын
Yes of course. What could I have possibly hoped to achieve else wise. Your comment is no way constructive nor presented in any fashion that can be rationally viewed as anything but antagonistic.
@andyk9685 Жыл бұрын
@@SPXLabs Let's start with the fact that you're not a professional. You're picking something up at home. Ok no problem. But such short cables mean that you have no room for maneuver. You don't know because you're not a professional. If you worked in networks, you'd know this. This is basic knowledge. Too bad you can't talk constructively, but you attack right away. I've been in this business longer than you've been alive. But it never occurred to me to write shit like that. You still have a lot to learn boy.
@SPXLabs Жыл бұрын
Yeah this is just a hobby…. I’ve never claimed to be a pro. If I had longer cables it would be messy and ugly, I don’t need maneuverability when the environment is static. You should have lead with this comment! It’s so much better.
@andyk9685 Жыл бұрын
@@SPXLabs As I said. You don't know what you're talking about. I have a question. Why do you need a patch panel if you don't know how it works? How do you connect more distant ports? There is such a thing as "Cable Management Panel". Opsss... I'm sorry, you don't know what I'm talking about. Real life is brutal... for you.
@jeremybw2180 Жыл бұрын
NEVER use BLANK patch panels! They are a problem waiting to happen. ALWAYS use punch-down style for easy troubleshooting.
SALEM EPISODES
Рет қаралды 773 М.
SPX Labs
Рет қаралды 401 М.
JayzTwoCents
Рет қаралды 303 М.
Cameron Gray
Рет қаралды 62 М.
How To Install a Blank Patch Panel | Pass-Through Patch Panel Installation | Patch Panel Termination
Field Tech Academy
Рет қаралды 560