Mach3 Plasma THC Wiring and Configuration

Рет қаралды 21,802

Күн бұрын

In this video, I show you how to wire the PlasmaSenseOut THC and configure it under the Mach3 control software.
My curated list of tools and items I recommend:
www.amazon.com/shop/buildyour...
If you would like me to work on your system, click the link to our contact us page, call us and leave a voicemail with a detailed description:
buildyourcnc.com/contactus.aspx
If you need help with CNC electronics, purchase tokens here:
www.buildyourcnc.com/item/sub...
Here is a video that can assist you in assembling the other components, but the links below have more detailed videos.
• Customer Plasma Electr...
Here is the pokeys57CNC controller:
www.buildyourcnc.com/item/ele...
The cable pack for the pokeys57CNC controller:
buildyourcnc.com/item/electro...
THC controllers that I sell:
www.buildyourcnc.com/item/ele...

Пікірлер: 26

@PatrickHoodDaniel Жыл бұрын

Hey All, thanks for coming here and watching my new video. The Mach4 version of this will be available in a few days.

@talentateknik6906 Жыл бұрын

Thank you my friend, very helpful. Can mach3 mapping the position of the material?

@PatrickHoodDaniel Жыл бұрын

@@talentateknik6906 There is no need. That is the purpose of the THC. If the nozzle of the plasma torch is too far from the material, the THC reads the arc voltage and moves the z-axis down back into the constraints of optimal cutting. Conversely, if the nozzle is too close to the material, the THC will move the z-axis up. The arc voltage determines the distance the nozzle from the surface of the material, so the z-axis will always be at the perfect distance to the material, no matter how uneven the material is.

@jdparden Жыл бұрын

Good to see you are still active and getting with it! Take care!

@spicesmuggler2452 Жыл бұрын

These projects are way above my head, but i love how well this video is made. You really make the whole process look satisfying with those crafty edits.

@PatrickHoodDaniel Жыл бұрын

All of my videos are intended for beginners. Thanks for the kind words!

@amithurmade8318 Жыл бұрын

Very nice explanation sir! Is optical linear encoder compatible with mach3 usb controller or not? Thank you

@wolfz9123 Жыл бұрын

Wanted to ask at the end you said that it could accept high voltage so does that mean I don't need to divide my voltage from the plasma cutter and can straight wire from my high voltage board to those terminals? Let me know thanks.

@tonyn9632 7 ай бұрын

Do you have a system to control the Mig welding gun for automatic welding

@rubalem1 Жыл бұрын

Patrick, I want to thank you for sharing all this very well described and useful information for us CNC enthusiasts, I was wondering if you have any experience working with a combination of Mach4 and PoLabs Plasma Sense device connected directly to the PoExtension2 connector of Pokeys57CNC board, I mean without the PoLabs Torch Height Control Plasma Out device.

@PatrickHoodDaniel Жыл бұрын

I don't have experience, but I do sell the components on the website. I will gain experience when a customer needs me to put one together. Thanks for the kind words!

@markleemorgan5679 Жыл бұрын

I am trying to fit a Dani THC to our plasma table. We have a Mach 3 CNC board and torch on is triggered via outputs and a relay. Having difficulty understanding where arc cable goes from the THC.

@PatrickHoodDaniel Жыл бұрын

The THC should have either high voltage terminals or divided voltage terminals like the ones I sell in the video.

@lionelchevalier5650 8 ай бұрын

Hello, I acquired exactly the same equipment for my plasma cutter but on the other hand I have a Mach3 board USB lambda card and I cannot get the up and down to work. When I use test function it works but not at all when cutting. Is it mandatory to use the 57CNC card because I had read that the system could work with other cards! Thank you for your feedback and your very interesting videos

@PatrickHoodDaniel 8 ай бұрын

The outputs for the plasmasenseout are simple digital signals of high and low on each terminal. As long as your controller can receive digital signals, you should be fine.

@o0Vion70o 9 ай бұрын

Hey, is it also possible to use the PoKey57E with this features?

@PatrickHoodDaniel 9 ай бұрын

Good question, not sure. I don't have any experience with this board. The polabs folks can answer this question pretty quickly on their support page (ticket system).

@sebastianestupinan7320 11 ай бұрын

Can you help me with the version of mach3, thanks u

@PatrickHoodDaniel 11 ай бұрын

What's your question?

@user-fw2rl5zw9r 2 ай бұрын

Can mach3 usb 100khz usb connfigure with thc plasma ?

@PatrickHoodDaniel 2 ай бұрын

In my trials I was unsuccessful. I would recommend the pokeys57cnc controller for this.

@TheDIYer Ай бұрын

How far is this controller system and your laptop/pc/pad from the plasma power unit?

@PatrickHoodDaniel 3 күн бұрын

It is important to separate the grounds for the controller/computer/drivers, and the plasma unit. The plasma unit should have a separate grounding rod.

@TheDIYer 2 күн бұрын

@@PatrickHoodDaniel ooh now it seems clear why i get issues even with good earthing

@PatrickHoodDaniel 2 күн бұрын

@@TheDIYer Yeah, if you look at some Hypertherm manuals (even if you are not using a Hypertherm plasma), they guide the user on this very subject. You can find the Hypertherm manuals online. They are definitely a great read and should be followed to a T.