No video
PATTERNING RETAY MASAI MARA 3.5" 12GA TURKEY GUNS with BURGESS CREEK TSS
Рет қаралды 11,018
Күн бұрын
@jeffreylocke8808 2 жыл бұрын
Retay shotguns are the best semi-auto shotguns made.
@levicameron934 2 жыл бұрын
Super awesome video and good luck with the new guns! I'm glad you all showed the difference in the shell patterns because a lot of people patterning their guns don't realize what that little change can do...Even with the same guns
@kykrazy6050 2 жыл бұрын
That fella at the 4:27 mark grabs onto that gun like he's holding on for dear life...lol
@dbuckner902010 2 жыл бұрын
Heck yeah man I didn’t see this coming at all I myself just bout a Retay but a 20 gauge just the matchup video I have been wanting to see
@TheBaysideLegion 2 жыл бұрын
Best of luck with it!
@MojobuckProductions 2 жыл бұрын
Heck yeah boys !!! Try cheap bird shot at 20 yards next time you dial in that red dot or have to check POI, then fine tune the bird shot again at 30, way cheaper and saves those TSS until you confirm at 40yds 👊🏼
@TheBaysideLegion 2 жыл бұрын
We shot at 15 yards with lead, then backed to 40. We still only shot 5 shells between us so they were pretty on.
@bobbymasters3025 Жыл бұрын
Just picked one up today thanks to this video
@brianblake-oc3mg Жыл бұрын
From all of my patterning I have done 3 inch out performs 3.5 evert time but great review good job
@TheBaysideLegion Жыл бұрын
This is the same conclusion we have come too. Bonce now shoots 3" and only saving 3.5" for when I run out of 3".
@speculizer1971 Жыл бұрын
Absolutely love my MM
@springcreeker1 2 жыл бұрын
I have found most of the time 3” is better than 3.5” for what ever reason.
@MrNcturkey 2 жыл бұрын
Good Video. What choke diameter are y’all using? Plus TSS from different companies could improve your patterns. But I do not think y’all need it. Great patterns. I would shoot the 3” if it was me. Good luck this season. Looking foreword to see them new Retay’s smashing some turkey heads.
@TheBaysideLegion 2 жыл бұрын
Jebs 0.665
@SloaneLindsey 4 ай бұрын
I don’t know if you guy will see this but how did you get the 24” barrels they tell me you can’t get them in a 24
@garden2tableproduce 2 жыл бұрын
Sand bags would help the sled not move good video
@howardfluty566 2 жыл бұрын
so what kind of problems did you have with you Tristar Raptor that you decided to switch?
@TheBaysideLegion 2 жыл бұрын
It wouldnt cycle. I had to manually eject the shell and rack another round. Plus the hammer would fly out 75% of the time which is why I had the tether on it. Oh and the picitanny rail kept coming loose because the threads got stripped.
@howardfluty566 2 жыл бұрын
@@TheBaysideLegion interesting. watched a bunch of videos on it. thanks for the update
@connorwolfsoutdoors2017 2 жыл бұрын
@@TheBaysideLegion mine does the exact same thing with the cycling, but only when out hunting. Its fine any other time for some reason
@austinfink4001 2 жыл бұрын
What mount is that with the red dot that is on the plate not the rail? Need one for my gun thanks
@bobbymasters3025 Жыл бұрын
I’d like to get mine drilled and tapped any suggestions
@alexfleming476 2 жыл бұрын
Did you guys have you’re guns drilled and tapped for the red dots?
@TheBaysideLegion 2 жыл бұрын
Yes we did.
@JTEtheridge 2 жыл бұрын
how were you able to darken your dip job up i would really like to do that with my guj
@TheBaysideLegion 2 жыл бұрын
ultra flat olive green camo spray paint held back a bit to just put out a mist. Hurt a bit being I had just paid for the dip but it had to be done and I'm glad I did it.
@JTEtheridge 2 жыл бұрын
@@TheBaysideLegion yeah i really like it. mine is that lighter and brighter color i’m assuming yours came as. do you remember the brand of paint you used?
@TheBaysideLegion 2 жыл бұрын
@@JTEtheridge rustoleum "camoflauge"
@allanpauling605 2 жыл бұрын
What mount did you use to put your red dot on??
@TheBaysideLegion 2 жыл бұрын
Drilled and tapped for picatinny rail and mount.
@gobstopper00 2 жыл бұрын
What length are the barrels and who did you use for the redip?
@TheBaysideLegion 2 жыл бұрын
24" barrels and Derek used shore hydrographics in Henderson MD, and Bonce used Dip It In in Bridgeville DE.
@gobstopper00 2 жыл бұрын
Where your guns drilled and tapped from the factory?
@TheBaysideLegion 2 жыл бұрын
@@gobstopper00 no we each had them drilled and tapped by local gunsmiths
@heathalford4721 2 жыл бұрын
@@TheBaysideLegion biggest set back right off the back I know of with retay. They say you don’t need a 3 1/2 chamber gun for turkey so they don’t factory drill and tap the 3 1/2 chamber guns
@SloaneLindsey 4 ай бұрын
@@TheBaysideLegion how did y’all get the 24” barrels they tell me you can’t get them in 24
@bigjhunter7660 2 жыл бұрын
What chokes y’all shoot?
@TheBaysideLegion 2 жыл бұрын
Both shooting Jebs 0.665
@bigjhunter7660 2 жыл бұрын
Roger that 👍🏻 Good luck this season stay safe.
@mdmitchell2 Жыл бұрын
3.5 in tss…. How did we ever kill turkeys without these these rocket launchers 😅
@kykrazy6050 2 жыл бұрын
Why on earth would you want to shoot 3.5" in TSS? Complete waste.
@SloaneLindsey 4 ай бұрын
I don’t know if you guy will see this but how did you get the 24” barrels they tell me you can’t get them in a 24
@SloaneLindsey 4 ай бұрын
I don’t know if you guy will see this but how did you get the 24” barrels they tell me you can’t get them in a 24
@SloaneLindsey 4 ай бұрын
I don’t know if you guy will see this but how did you get the 24” barrels they tell me you can’t get them in a 24
@TheBaysideLegion 4 ай бұрын
When we bought ours they were offered with a 24" barrel. They've since discontinued them.
Yellowlab247 NC Outdoors
Рет қаралды 15 М.
Ron Spomer Outdoors
Рет қаралды 144 М.
Dave Owens: the Pinhoti Project
Рет қаралды 102 М.