This a very talented idea with the mind in the creator for me your 100 percent mechanical engineee who built your owned face milling cutter.... im a motorcycle mechanic in the phillopines and i love what you did to create something .....❤

Nice job,pretty cool face mill, also I liked the use of a mill like a lathe to true up the material to the arbor!👍🇺🇸

Excelente profissional. Parabéns! Nota 10....100.....1000

The precision of your cutting oil application is unmatched.

Very cool! I wanted to make an insert tool like this for a Bridgeport but never got around to it in school. One thing I read in machinery's handbook was that on tooling like this with multiple bits it is useful to slightly offset the slots from true so that it minimizes chatter by broadening the frequency response and lowering the maximum resonant quality. Like for a four-bit cutter, you could offset two consecutive slots by plus one degree from true, and the other by minus one degree. This will slightly alter the balance, but high precision tools need to be balanced after machining anyway. 🙂

nice video....very professionally presented.....i very much appreciate that we weren't forced to listen to a talking head and also there was no music.....perfect....just the work and nothing but the work, exactly as it should be.

That’s a beautiful finish on both pieces !!

Хорошая работа! Креативно) 👍

Powertapping that nice piece of steel - man, you have balls ! ;D

Essa interpolação manual que fez 😯😯😯 e ainda manteve dentro do desenho na peça 👏👏👏

Ótimo ferramenta bem elaborado , parabéns.

That's the tool I am talking about, nice and easily done ! Love your video, right on Paul !

wow..... like every time its so wonderfull to watch... you r a genius !!!!

Perfect.. Thank you for sharing it! I really enjoyed watching this beautiful work!

Dude,I love the way when you use the mill as Lathe. Thanks for the video

QUERO UNO IGUALITO, pero recién estoy haciendo mi torno, pieza por pieza porque no hay plata, pero apenas termine eso lo pondré en mis primeros proyectos, que alucinante, ver una maquinaria perfecta un sueño que todos quisieran tener y pensar que dentro de todo hay personas que nos dan esas ilusiones y nos enseñan con tanta paciencia que hasta un niño entendería, gracias don Pablo

Merci... vous m'avez montré des méthodes que je n'avais pas imaginées pour cette fabrication Beau travail

A hell of great cutting job ! Awesome .

Cylinder head came out beautifully ! Good jod GENIUS

Excellent filming and excellent machining. Great video

Parabéns excelente trabalho sou do Brasil parabéns 🇧🇷👍

Great job! Nice peace of work! 👌👍👍

Looks like that head needs a lot more than just a deck. 😂😂 Enjoyed it, thanks for sharing.

Whoa! That's a very nice cutter! With all that mass, it should power through most jobs easily 👍 I've used a large 160mm concrete hole saw as a face mill for finishing a large wood surface. The wood block was too thick to fit in a planer/joiner, so I thought "hey, we can use a hole saw like a fly cutter". On location, didn't have too many tools or too much time, and we had to finish the job, so it seemed like a good idea at the time (doesn't it always). We (I mean me) underestimated the cutting forces involved, and the very first cut send the chunk of wood flying 6 feet across the room, and toppled the heavy drill press it was mounted on!! Thankfully, the cord came loose and the machine switched itself off. For a moment there, I felt someone was going to die 😱 Thankfully no one was injured. After that we clamped everything double tight, increased the cutter speed, slowed the feed way down and then it gave a really nice finish on that block of wood.

That's some kinda flycutter! I love it!!!!

I've done turning on a mill before, but never seen anything that big turned that way before.

This was a fantastic build video.

Aí sim hein uma ótima ferramenta show 🙏

Your craftsmanship is a 10 star rating 👍

Good stuff! And nice editing too 👍🏼

Talent beyond belief. I love it.

Belo trabalho de usinagem

Beautiful!!!! You're a Máster, genius👏👏👏👏👏👏👏👏👏

Best one of these I've seen on KZfaq. Well done.

Excellent design and manufacture, great addition to the shop. Thanks for sharing

Great work i want one

Nice project - thanks! I'm very interested in the "router table" that you show at 9:18. Is the (appears to be 8-flute) bearing-guided chamfer bit something you purchased or fabricated? If purchased, can you share the source, and if fabricated, any details on what you started with and how you went about it. Do you use any other bits in it (e.g., very small corner radius)? I use router tables all the time in woodworking but hadn't thought of extending the concept to finishing steel parts - genius! A brief overview of your machine would make a very nice, short video. Thanks!

fantastic!! thanks

Clever use of the mill mate.

This is an awesome video! This part that you Made turned out really well! Great job keep up the good work!

Eres un gran profesional

Good job, this is fvrite turning solution.

Another stunning job ,👍👍👍

Coolest project I have seen in a while. Great work!

Nice video mate, was so good I forced the missus to watch it! Cheers

офигенно! но обычно вроде треугольная пластина и один резец! я такую на ф300 сделал)))

Шикардос Profi

With that nice cutter uuhhh.... Suscribed!!..

Simply fantastic 👍

ألف تحية على الإتقان

Estoy fascinado con su video y los cortadores de asientos como se o donde compran de antemano gracias espero su respuesta felicidades.

I think that's so awesome that you can make your own tools with machine tools, but you need so many machines that I don't have.

What a great project this is. Thanks for the step by step pics. May i ask what thickness the cutter ended up at?

It work's exactly the way it should and leaving a nice finish

Perfect.. Thank you for sharing it!

Belo trabalho parabens

I gotta be honest, at the end of the video when it was spinning on a empty mill, I thought for a second you were going to use it to tram the table of the mill. I about had a heart attack. Well done sir. I love the tool height adjustment screws.

Amazing.

Great job!

Nice job man very good.

Fun to watch👍👍👍👍👍👏🏻👏🏻

it was amazing, full of technique and precision😊👍

Fantastic machine work .

What kind of milling machine are you using? What kind of tolerance it can provide for boring holes and what are the surface finish tolerance when face milling? Nice tool, I hope you put thought into balancing it.

the youtube algorith dig in my mind to show me the home page, where this video have be waiting me to see ... this for wood planning would be the boss

This to much for this little machine, nice problem solving. Greating from Hungary

I really enjoyed watching the video thanks

perfectly done!

This face cutter is beautiful. Shaves like a razor. Especially this five-valve head. Congratulations 👌.

Masya allah.very good.

Excellent craftmanship buddy,enjoyed the build👍👍

Wow,well done 👌

Excelent!👌👌

Great project, and I liked the sandblasted finish. What RPM do you use for steel, and for aluminium?

Um trabalho super top

Bellissimo utensile, complimenti

Wonderful work...

Good job, nice work

excellent job a hug from Portugal✌✌✌

Love yr videos

красота🤟🏽

Very nice. I thought i heard an uneven beat when you cut in slow motion, i know you checked the tool height but what about the radial distance?

AWESOME. GREAT TOOL.

nice work dude!!!

Thanks for sharing whole process. Is the press fit and force of the screw enough to take the cutting force?

your post is univercity and very good thank you

How can I contact you directly about this? And your valve seat cutter.

Joss...indonesia menyapa...

Lovely balanced fly cutter

nice workk

Fery nice good job .

incredible precision, perfect craftsmanship, powerfull tools. Total 💯 👏🏻👏🏻👏🏻👏🏻

Excelent. I have to do the same thing on my mill, 'cause my lathe isnt' big enough, to produce 2 spoked wheels for my bandsaw 440 mm in diameter. =/ I hope it will work as planned.. Cheers.

Well Done 10/10

AWESOME ♥.

Best working. And best of the best tools. Getting better

What inserts did you use?

Using a mill as a lathe. Nice

Great work, it looks like a really good tool If you shorten the stickout of those tool holders you will get more rigidity and you could probably take heavier cuts

I was just looking for this!