#pavopico #djio3airunit
0:00 intro
0:07 unboxing subscribe
0:17 what do we get in the box from betafpv in 2024?
0:38 betafpv lava battery 2s 450mah 75c
0:45 First look at betafpv Pavo Pico
0:59 2 x dji 03 air unit cages
01:27 last thing in the Box
01:37 Closer look at the Pavo Pico
02:12 Pavo Pico Buzzer mod
02:32 betafpv Lava battery closer look at the 2s 450mah 75c
03:34 Using the dji controller 2 with a Betafpv Pavo Pico
04:00 subscribe to my channel
What do we get in the box in 2024?
Thanks to all the enthusiastic pilots who participated in the BETA TEST before, we've now released the smallest 2S about 100g DJI O3 Cinewhoop! This ultra-light cinewhoop with a small wheelbase is not only equipped with 45mm propellers but also the latest F4 2-3S 20A AIO FC V1 which greatly heightens the flying experience. Due to Its split design HD VTX mounting bracket, it supports quick installation of mainstream HD digital VTX modules and a rubber damper vibration-damping design with GyroFlow stabilization software ensures stable and smooth HD images. Its design is well-suited for cruising indoors and outdoors alike.
We upgraded the FC board since the second batch, details are below:
Stable 9V 2A BEC power for the DJI O3 HD VTX, preventing disruptions caused by low battery voltage.
Improve ESC to 20A and a peak current of 25A, allowing it to handle special situations like motor blockage or stalling.
Connector for DJI O3 HD VTX and USB port for easy installation and maintenance.
For more details, check the Flight Controller paragraph.
Bullet Points
The split-design HD VTX mounting bracket is compatible with popular models like DJI O3 Air Unit, Walksnail Avatar HD Pro, and Caddx Vista. The side bracket, rubber damper vibration-damping design, lens holder, and antenna have all been reinforced to suppress low-frequency vibration and enhance the safety of HD VTX, ensuring a stable output of high-definition videos. Simply connect the VTX cable and complete the binding process to start flying.
To safeguard the DJI O3 camera lens and maintain consistent high-definition video output during flight, both a lens filter and a lens protection mount are included.
The battery slot and HD VTX mounting bracket duct height have been reduced to enhance the overall flying experience. DIY battery fixing methods are also supported, making them compatible with batteries of varying sizes and capacities.
The new F4 2-3S 20A AIO FC V1 upgrades from F4 1S 12A FC V3, weighs only 5.92 grams, and is optimized for HD digital VTX. Its improved computing power, high response speed, and stable flight make it an ideal choice for HD whoops.
The frame is constructed using PA12 material, known for its exceptional impact resistance and effortless installation process.
Specification
Items: Pavo Pico Brushless Whoop Quadcopter
Color: Black
Flight Time*: 4min
Wheelbase: 80.8mm
Battery*: LAVA 2S 450mAh 75C Battery
FC*: F4 1S 12A AIO FC V3(First batch), F4 2-3S 20A AIO FC V1(Since second batch)
Props: GF 45mm-3B black propeller
Motor: 1102 | 14000kv red and black (2022)
Weight (No Battery): 73.47g (DJI O3), 67.37g (Vista), 68.14g (Avatar)
Frame: Pavo Pico Brushless Whoop Frame
HD VTX: Support DJI O3 Air Unit, Caddx Vista Kit / RUNCAM Link / Walksnail Avatar HD Pro Kit installation.
RX Version: Serial ELRS/TBS
FPV Camera: Support DJI O3 Camera, Caddx Series, RUNCAM Series 19mm/20mm Camera, Avatar HD Pro Camera.
Note: The flight time is calculated under 8.4V~6.8V. The battery will be upgraded from 450mAh 2S Battery to LAVA 2S 450mAh 75C Battery from Feb 2024, and the second batch of FC starts in Aug 2023.
HD Digital VTX System
Pavo Pico supports various types of HD VTX. DJI O3 and Walksnail Avatar Pro Kit both support HD digital VTX up to 1080P using dual-band transmission technology for better signal stability.
#pavopico #djio3airunit