PCP Airgun Moisture Filters, MUST KNOW INFORMATION!!! PART 2

Рет қаралды 25,295

6 жыл бұрын

This is part 2 on PCP Airgun Moisture Filters. We describe how the filters work, what needs to be included in a filter, and of what to be wary.
Part 1 can be found here: • SAFETY Facts you MUST ...

Пікірлер: 40

@AirGunScientist 6 жыл бұрын

All units are available at experthpa.com/cart/cart.php?m=product_list&c=26

@james1795 6 жыл бұрын

Thanks for the explanation.

@CCWGGuy 6 жыл бұрын

Great information!

@fredking9118 3 жыл бұрын

Great article. I use the filter and bought a compressor from you. I need to order a new pack for the alpha filter.

@racheltgal 6 жыл бұрын

Thank you very well done

@skinnymitchairgunbrotherho7152 6 жыл бұрын

Thanks joe

@Danielhenning86 4 жыл бұрын

Thanks for the info and God bless.

@AirGunScientist 4 жыл бұрын

Thank YOU.

@OnyxIGPIII 5 жыл бұрын

I bought a Omega Turbo Charger that spits out the moisture every minute or 20 mins what ever u set it for. Does the line to the tank or rifle still need a filter. Sounds like the unit is catching it for ya.

@cameronmaxwell9306 5 жыл бұрын

Hi guy! I want to buy a hand pump for my pcp binjamin woods walker .22 air rifle,do i need a filter for the pump? They are a lot i see with out filters.

@imirmetushi5205 Жыл бұрын

Can this filters be used to fill a scuba tank also? Basically is air good for breathing?

@Gw0wvl 4 жыл бұрын

Where can you buy Aloominum from .... ?

@Light_357 Ай бұрын

Why do u not sell the smaller carette filter anymore??

@EarthSurferUSA 5 жыл бұрын

Hey Joe, long time machinist here, (and a small shop porting small 2-stroke gas engines for a living in Michigan. I build some the the best in the world). For the larger filter housings, I think you can buy seamless tube aluminum to the ID that you need, (and may just machine the OD if you want for a nice finish). Just out of curiosity, why did you choose solid stock instead? (not sure of what kind of finish you need in the ID) I have a small CNC mill. If you guys ever need some small parts made, I would love to give you a quote. And if you don't have a "Tormach" CNC machine, you have to check them out. Great little machines for a small gun shop. My 1.5hp 220 single phase mill only cost $12,000, 11 years ago, and I have about 1 million dollars worth of work put through it so far. Great little business you guys have there. Enjoy the excitement of capitalism while we still can. :) Doug @ EarthSurferProducts.com

@dougdunlap5889 Ай бұрын

SO WHAT DOES THAT SAY FOR THE FILTER IN THE NOMAD2? ?

@xiavue2606 6 жыл бұрын

Hey bud where is your store location at anyways or number to call you on stuff like airguns and air rifle pcp THANKS for all your videos it helps alot

@phillipmendiola1257 6 жыл бұрын

Real good information, awsome vidio

@bltefft 3 жыл бұрын

Hey Joe. I have your Alpha filter and wonder, after I've filled my Hammerhead SCBA tank, what do I bled first. I assume I need to bleed the Alpha filter BEFORE I bled off the HPA 4500 compressor. Right?

@AirGunScientist 3 жыл бұрын

Bleed the filter first, so you get all the moisture out.

@fredA1234 4 ай бұрын

Hey guys. I called you about four or five months ago about getting one of your alpha filters. Apparently you were missing a part to assemble them. I had left you my contact information when you were getting them back in stock. It’s starting to get into spring now and I like to start shooting. I wanted to see if you guys had the parts to make the L for filters or not. Please let me know in the comments and I will give you a call. Thanks. Fred

@jimbert50 6 жыл бұрын

Is a moisture filter necessary on the output of a scuba tank that was filled at a diving shop?

@AirGunScientist 6 жыл бұрын

It shouldn't be necessary to filter breathing air from a SCUBA shop. That air is held to a standard (People's lives depend on the regulator not freezing up from moisture). With that said, I have customer tell me that they had moisture in their tanks from dive shops. Personally, if going to a quality dive shop, I wouldn't worry about it. Ask the shop owner how often the change their moisture filters. Also, keep an eye out for signs of moisture in your tank either when being filled, or when filling your PCP. Safe Shooting!

@lounaticlouie 6 жыл бұрын

Hydrophilic, not hydroscopic. Otherwise great information. I know people who use nitrogen instead of air. Is there an advantage or disadvantage?

@EarthSurferUSA 5 жыл бұрын

"Hygroscopic", the ability to pull moisture from the air (as ethanol alcohol is also, which is a big reason not told, why it is junk for your daily car), not hydroscopic. JB had it right.

@electrichellion5946 3 жыл бұрын

Why not rent a tank from a liquid gas type filling station and use nitrogen or bottled air from them?

@greedygringoprospecting6941 6 жыл бұрын

when is the video of the crown or the impact or do I have to bring in my wolverine .303 100 ft/lbs to do a video the silver impact looked bad ass for a video on the one you sold when I was looking for .30 44.75 grain jsb pellets

@hughdonnelly1419 Жыл бұрын

Hi I live in ireland and would be interested in purchasing an alpha filter for our club compressor where can i buy

@AirGunScientist Жыл бұрын

I think calling us would be best. I'm not sure ordering online would help due to unknown shipping.

@65LB 10 ай бұрын

Filters VERTICAL. not horizontal

@kr6dr Жыл бұрын

Vertical, not horizontal.

@hksjoshua 5 жыл бұрын

sounds like marketing

@lracrellim2711 6 жыл бұрын

Horizontal? That looks vertical to me but I don't have a degree in physics

@AirGunScientist 6 жыл бұрын

??? OK, I watched the video, and I only see me state Vertical (@ 3:38). Let me know if I say horizontal somewhere that I missed and I'll edit it.

@dankyle6924 6 жыл бұрын

Check at 3:54 Joe

@jimforjzs777 5 жыл бұрын

You should zoom in on the stuff as it is too far away.... Is it ego and has to show all of you all the time??

@EarthSurferUSA 5 жыл бұрын

The 1st definition of "Ego" in the Microsoft word pad dictionary, is "Self Esteem", which is something man should achieve. There is no shortage of marxist's educators out there though, who do not want individuals to have self esteem. I think we should sue them,---collectively.