Making barrel rifling using steel tubes

Рет қаралды 190,389

22 күн бұрын

Making barrel rifling using steel tubes
In this video I will show barrel rifling for a 5.5mm, or .22 cal tube using an allen key. the same allen key method can be used for other calibers too, just make sure that the rifling button is 0.1mm-0.2mm bigger in diameter than the barrel inner (bore) diameter. In my case I used a 5.62mm button for a 5.48mm tube, and it worked quite well as you can see in the video. This barrel will be used for gas propelled PCPs.
Note: This video is for educational and entertainment purposes only. Do not emulate or copy anything you see in this video.
Allen keys: s.click.aliexpress.com/e/_Dns...
12mm OD tube (ID: 5.5mm, 4.5mm, 6mm, 9mm): s.click.aliexpress.com/e/_DEn...
16mm OD tube (more options +7.62, 6.35, etc): s.click.aliexpress.com/e/_Dlo...
LATHE used in the video:
MINI Lathe 7x16 800W (Europe and USA link): s.click.aliexpress.com/e/_DlY...
Asia link: s.click.aliexpress.com/e/_Dlt...

Пікірлер: 141

@robertsimpson6324 20 күн бұрын

I made a sine bar machine which allows me to make different twist rates but a lot of work...this method you come up with is perfect for people with minimal tooling excellent idea mate well done

@pcpairgunschannel 20 күн бұрын

Sounds great! Yes, this works really well and can be made with just an angle grinder, torch and some very basic tools. The end result looked better than I expected, very clean grooves.

@arpadlimanagy7018 4 күн бұрын

Cano calibre 22LR ou 3,57 Magnum?

@redmorphius 2 күн бұрын

I love this. Thanks for sharing. All the people complaining probably can’t even hammer a nail to hang a picture on the wall

@Bangsoljirak 14 күн бұрын

Ok brother i am waiting next part for test👍

@airgunningyup 20 күн бұрын

one of the best rifling jobs ive seen

@pcpairgunschannel 20 күн бұрын

thank you! I hope it will shoot as good as it looks

@greatman73 12 күн бұрын

Wow, you are a genius

@airsight2753 20 күн бұрын

That's really good rifling bro!

@pcpairgunschannel 20 күн бұрын

Thanks! Let's see the results.

@greggorio6259 17 күн бұрын

@airsight Idol. pariho kayong magaling gumawa ng airgun. Idol ko kayong dalawa.😊

@ping6246 20 күн бұрын

man, you are the true hero!

@pcpairgunschannel 20 күн бұрын

👍😎👍

@jimsun2486 20 күн бұрын

Very innovative. Looking forward to use it in Pcp. 😀

@sanchezic 14 күн бұрын

the width of the rifling should be greater than the width of the fields or the same, such a barrel will greatly spoil lead bullets, which means that the accuracy will be poor. I used to make a button on a lathe using a knurling with a straight tooth and a pitch of 1.2 mm, which was equal to 12 threads of 5.5 mm.

@boomstick4054 3 күн бұрын

I was thinking you could start with a larger Allen wrench for the steel stock. Machine it to the standards you mentioned, for equal & flat lands & grooves, then heat & twist.

@benoitdudzik8010 20 күн бұрын

tanks for the video super cool job !!

@pcpairgunschannel 20 күн бұрын

Glad you liked it!

@greensun1334 6 күн бұрын

To make the button, you can use a drill bit as well, it's usually made of well suited HSS steel and you just have to drive it trough the barrel twice to get the necessary grooves.

@pcpairgunschannel 6 күн бұрын

Yep, there are many more methods I plan trying

@CarlosManuel-wm2ud 5 күн бұрын

Buen desarrollo en el estriado de su cañón al menos una idea que muchas personas desconoce lo que sin trucos falta probar la precisión ahí es donde en realidad se obtiene el resultado de su trabajo 😊😊😊😊😊

@TheDamnSpot 18 сағат бұрын

I would have made the rifling cutter bit longer to prevent any possibility of wedging sideways into the tunnel. While highly unlikely, you are using impacts to drive the bit through and just a little bit of torsional momentum could theoretically cause one blade edge to really dig in and ruin your barrel. I forget the length to width ratio of what you need but it's not a lot longer than what you have. Just a thought. I think it's great even as is.

@pcpairgunschannel 18 сағат бұрын

@@TheDamnSpot 👍 This was my first time rifling a barrel, and I will still try many other methods

@jefersonarredondo6673 19 күн бұрын

Excelente amigo, esperamos las pruebas, nosotros podemos construir nuestras propias herramientas, ya que el button rifling se puso escaso, y costoso, hice uno de una broca de acero rapido

@ukash4ever 7 күн бұрын

Excellent idea, thank you for sharing! : )

@pcpairgunschannel 7 күн бұрын

👍👍

@greggorio6259 17 күн бұрын

😮woww its great work again idol.

@MrSteppingstone888 7 күн бұрын

Awesome guessing the steel tube and bars came from Alli express.. super tek brake cleaner spray cleans out oils super quick

@mohdnasir2173 20 күн бұрын

hasil kerja yang baik,selepas ni tolong buat cetakan peluru..

@SchweinungHD 20 күн бұрын

Awesome stuff! One question, should it have a chamfer where the projectile leaves the barrel? I've never tried to make something of this sort, but was taught not to ruin the sharp edge on the end of the barrel of my 6.5x55 mm rifle.

@pcpairgunschannel 20 күн бұрын

Yes, it should be chamfered. It's called "barrel crowning", in the video I did that with high grit sandpaper and an 8mm steel ball, after chamfering the end with a drill bit. That might not sound very precise, but it actually leaves a very fine finish. Some rifle barrels might have different designs, others may have sharp precise non-chamfered ends while others have a deep chamfer. Search "barrel crowning" on Google and check the images, you'll see many different designs. Also, in my case this will not be used for a firearm, but for a PCP air gun.

@SchweinungHD 20 күн бұрын

@@pcpairgunschannel ah, I see, cool! Awesome to learn new things!

@francescoardito5690 8 күн бұрын

Bravo ci voglio provare anch'io 💪💪🙋

@Arturo277 7 күн бұрын

Excelente trabajo de la estria del cañón creo que ahora le haces la recámara para el casquillo o bala y el percutor

@karlalton3170 20 күн бұрын

Would it not be better to start with a 6 mm Allen wrench and grind it down to what you want ?

@pcpairgunschannel 20 күн бұрын

That would work and I did try it but I didn't achieve as good precision with it. It's about skill so if you can manage to do it and keep the sides consistent in size then you can do it.

@DewaSenapanIndonesia 10 күн бұрын

This is a good result, I have tried it 🇮🇩🇮🇩

@pcpairgunschannel 10 күн бұрын

@@DewaSenapanIndonesia 👍👍

@ameenattef469 14 күн бұрын

Really amazing. But why do you beat and knock over it after heating it?

@pcpairgunschannel 14 күн бұрын

because it was only 5.55mm in diameter, that's not enough for rifling. I increased the diameter by doing that, it ended up being 5.62mm

@ameenattef469 14 күн бұрын

@@pcpairgunschannel 😁😁😁Great, I thought that was likely, but I wanted to make sure.....but did you know why I wanted an Arabic translation? So that I can understand and follow what you are saying. Greetings

@andrsivohin8167 15 күн бұрын

Молодец! Я делаю кнопку из шарикоподшипника,потом на токарнике с помощью болгарки прорезаю нарезки.И да,лучше всего проталкивать получается мощной дрелью-перфоратором.Плюс смазка машинная не годится-лучше использовать олеиновую кислоту с литол-24.Удачи в хобби!

@pcpairgunschannel 15 күн бұрын

Спасибо! Очень интересно 😮

@manchagojohnsonmanchago6367 9 күн бұрын

Yep Hammer drill. Or an Air tool

@faq_is_love 8 күн бұрын

Проталкивать лучше гидравлическим прессом.

@faq_is_love 8 күн бұрын

@@pcpairgunschannel И да, на али и правда можно купить дорны для нарезей. Я раньше искал по запросу "rfling button" и ничего не находил, но по запросу "helical push drill" они вполне находятся.

@sanchezic 8 күн бұрын

@@andrsivohin8167 Круто. Я тоже на токарнике кнопку делаю и на нём сразу накаткой делаю канавки, накатка прямозубая с небольшим уклоном и шагом от 1 до 1,5мм в зависимости сколько нужно нарезов. Смазка на основе серы, талька и коллоидного графита и желательно канал обрабатывать тиосульфатом, как то так.

@user-ph2lk2rs9e 8 күн бұрын

what heat treatment should the barrel have when using a 1000 Joules mounting cartridge 27cal?

@pcpairgunschannel 8 күн бұрын

@@user-ph2lk2rs9e Sorry I dont have experience with gun barrels, this is for a PCP air gun

@snakes111b 3 күн бұрын

so quality air gun with mechanism,only change barrel and have 22LR?Am i right?Can you give advice of some good cheap air gun?Thanx

@CarpinteroJesus 10 күн бұрын

Where did you get the steel tube? Great video

@pcpairgunschannel 10 күн бұрын

@@CarpinteroJesus Hi, there is a link in the description if you want to buy

@javierdasilva9064 7 күн бұрын

La idea es lo que hace evolucionar el ser humano, y que no se acostumbre a depender de lo que esta hecho sino a elaborar sus propias herramientas..Si las ideas no se hacen no sirven. Mi padre me lo decia..

@pcpairgunschannel 7 күн бұрын

👍👍

@greggorio6259 17 күн бұрын

Im eager to see the results.

@pcpairgunschannel 17 күн бұрын

will use this for a PCP pistol. Stay tuned!

@jefersonarredondo6673 4 күн бұрын

Amigo esta llave allen en realidad se deja templar para hacer el estriado ?

@pcpairgunschannel 4 күн бұрын

¿Cómo lo usarías para moletear? Lo siento no habla español

@arielsgood4972 16 күн бұрын

Hey sir, how do I even make a barrel if it's so specific for 7.62mm?

@pcpairgunschannel 16 күн бұрын

@@arielsgood4972 you can buy precision tubes

@MrBuddy.....X 5 күн бұрын

I really can't understand how it can twist on its own without having something attached that turns it, and in the end you bang it in, and I don't understand, even though it is SLIGHTLY twisted, how you can make the barrel rifled just by banging it in, it doesn't make sense for myself

@pcpairgunschannel 5 күн бұрын

The twist of the button forces it to twist around

@MrRick693 2 күн бұрын

It's the same as a screw into wood

@endrymargam7863 17 күн бұрын

Gunakan steel wool bro,agar lebih bersih

@pcpairgunschannel 17 күн бұрын

👍👍

@Leva.Muslim 5 күн бұрын

How Dana says:"Its ******* unlegal...😂

@Mazarakis_Spyridon 6 күн бұрын

Is it necessary the water to contain salt for the heat treatment to get the steel hardened?

@pcpairgunschannel 6 күн бұрын

If its not hardened the button will deform and not cut so well. You can also dip it in oil but you need to temper it so its not too brittle

@Mazarakis_Spyridon 5 күн бұрын

@@pcpairgunschannel I asked you, if the water for the heat treatment is necessary to be salt water. Is it?

@pcpairgunschannel 5 күн бұрын

@@Mazarakis_Spyridon Yes, it won't work with just water.

@Mazarakis_Spyridon 5 күн бұрын

@@pcpairgunschannel Thank you!

@javierdasilva9064 7 күн бұрын

Gracias por la idea la pondre en practica elabora uno para .38 o enviame las medidas .

@pcpairgunschannel 7 күн бұрын

¡Excelente! También puedes usar un escariador para hacer las ranuras, si lo giras de la misma manera. Sólo una herramienta de corte que sea al menos 0,1-0,2 mm más grande que el diámetro interior del cañón. ¿de dónde eres? Lo siento, no hablo español. enlace: s.click.aliexpress.com/e/_DDVqDYf

@arielsgood4972 18 күн бұрын

Sir is long valve better than short valve?

@pcpairgunschannel 18 күн бұрын

No difference, they are just different designs.

@rungrojlikitsatit6590 15 күн бұрын

👍👍👍

@robertkonarski7609 20 күн бұрын

👍👍👍👍👍👍

@albertorodriguez9669 14 күн бұрын

Debio poner un paño o una madera para que las limaduras no caigan sobre las guias del torno ya que pueden perjudicarlas😮

@pcpairgunschannel 14 күн бұрын

Es cierto que mientras lijaba debería haberlo hecho.

@pietrobernini4471 13 күн бұрын

Good iob but the pitch seems too short.

@philliposip1108 9 күн бұрын

I'd use a skrew bit, little harder

@eleieudolucena8115 4 күн бұрын

Top 10

@frankyg2384 6 күн бұрын

Isn't the button supposed to be sharp to cut the rifling?

@pcpairgunschannel 6 күн бұрын

No metal cutting tool needs to be sharp like a kitchen knife, rifling buttons dont need sharp edges

@alfonzoidalgo9091 7 күн бұрын

i queda un estriado bien preciso

@user-lo6kc8jb8k 9 күн бұрын

Чистота поверхности плохая. Взял бы покупной китайский дорн.

@user-ud2pl3vk3z 20 күн бұрын

جميل جدا من اى اتجاه ندخل الرصاصه من اتجاه اداخل اداة العمل ام من مكان خروجها

@pcpairgunschannel 20 күн бұрын

شكرًا لا يهم من أي اتجاه تدخل الرصاصة، ما يهم هو أن يكون طرفي البرميل أملس، حتى لا تتضرر الرصاصة من أي جانب.

@mehmetdalma2741 6 күн бұрын

Complimenti.

@aleksandermojstrovic2279 6 күн бұрын

Pefect I have doone almoust the same way, but you do better.magnifecent.Kranj Europe.

@pcpairgunschannel 6 күн бұрын

👍

@sonakhuraijam7223 20 күн бұрын

How many long pcp gun berral ?❤❤❤

@pcpairgunschannel 20 күн бұрын

this is 300mm long, but you can use 200mm, 400mm, 500mm, 700mm... anything you want. this will be used for a PCP pistol.

@sonakhuraijam7223 20 күн бұрын

@@pcpairgunschannel thanku....how can I buying this pcp gun barrel..I want to this barrel..Plzz help me...

@pcpairgunschannel 20 күн бұрын

@@sonakhuraijam7223 Due to courier policy i can't deliver my own products. You can make it the same way as I did it in the video, you can buy blank tube and rifle it yourself like I did it in this video. If AliExpress doesn't work you can buy it from ebay also, just search "hydraulic steel pipe"

@Zapheteroped 4 күн бұрын

Neato!

@jianzsun1984 13 күн бұрын

Rifling lands too wide

@user-ir4eq3vj1j 7 күн бұрын

это мусор а не протяжка!

@RonBateman-vl2wz 14 сағат бұрын

Where is the follow up accuracy vid??

@pcpairgunschannel 5 сағат бұрын

@@RonBateman-vl2wz coming. I am yet to build a PCP pistol

@hugoargote6280 6 күн бұрын

Cuidado al trabajar en el torno con esos guantes amigo....si llega a agarrar su mano ?😢

@pcpairgunschannel 6 күн бұрын

Tienes razón, ya no uso guantes mientras manejo un torno.

@Gabriel-rn1si 19 күн бұрын

Faça uma câmara e uma coroa

@pcpairgunschannel 19 күн бұрын

Isto é para uma pistola PCP. Vídeos em breve

@adityasalunkhe1288 20 күн бұрын

Making rifle barrels using tube steels (:

@pcpairgunschannel 20 күн бұрын

so what do you think of this rifling technique?

@user-yz3bc9ok9l 20 күн бұрын

精度怎么样

@pcpairgunschannel 20 күн бұрын

我将在几周内用这个枪管制作一把手枪。然后我会上传一段测试准确性的视频。

@user-yz3bc9ok9l 20 күн бұрын

@@pcpairgunschannel 非常期待

@itsthorondil7608 13 күн бұрын

Dont grind on the side of your wheel like that, its not designed for it and the wheel can explode after a while ...

@timkourbo3196 3 күн бұрын

Wearing gloves while operating a lathe? Bruh....

@johnkaup6382 9 күн бұрын

Hmmm😏

@zZEN26rus 8 күн бұрын

Лайк за идиотизм 🎉

@sergebourel1664 12 күн бұрын

👍👍👏👏💪💪🇨🇵🍾🥂

@katiestevens1397 8 күн бұрын

The most detailed video I've actually seen on this method to date and I've watched a few of them, keep up your good work my friend.

@pcpairgunschannel 8 күн бұрын

Thank you!! 👍

@littlehills739 10 күн бұрын

dont use gloves with a grinder or lathe google hand de-glove work safe. gloves drage the fingers in and rip them off - no glove you go och thats hot and a cut

@haroldpearson6025 5 күн бұрын

Stop doing lathe work with a file

@pcpairgunschannel 5 күн бұрын

A file can be used for chamfering on a lathe, surely. Just dont pull it back and forth

@ameenattef469 20 күн бұрын

♥♥good job. Well done.. but how accurate is it? A video of the accuracy, please. Is this method effective, please? I would like to activate the translation into Arabic so that all the benefits can be spread. I have translation programs, but they are not accurate in terminology and some words. Video translation is not sufficient. Greetings from Egypt.. and we are waiting for the accuracy video

@pcpairgunschannel 20 күн бұрын

Thank you! I will upload testing videos in a few weeks, using a PCP pistol.

@ameenattef469 19 күн бұрын

@@pcpairgunschannel Waiting.. Greetings

@mrkalikutista8729 16 күн бұрын

I admire your work, but a rifling button is just about 12$ ishhh so it's not practical to waste your time make all those fuzz? Furthermore you are not even sure how accurate the results would be? If it fails, you wasted time plus the tube you ruined. So why not buy the real thing?? It cost just less than 20 bucks

@pcpairgunschannel 16 күн бұрын

@@mrkalikutista8729 I would need more than just a rifling button. Commercial rifling buttons cannot be hammered and need tons of pressure, which will end up costing me a lot more than just 12$

@mrkalikutista8729 16 күн бұрын

@@pcpairgunschannel you're wrong you can do the same hammering with the cheap commercial one. Or use a bottle type car jack to push the rod instead of hammering it. Google hammer button, it's a good button, im using that one, stay away from those cheap chinese craps.

@gengiscu 11 күн бұрын

your mind is so limited

@manchagojohnsonmanchago6367 9 күн бұрын

@pcpairgunschanneive hammered commercial buttons on ebay.. l

@RodrigoFernandez-td9uk 8 күн бұрын

@@mrkalikutista8729 - Fun. You can also buy the stuff already finished. - Unavailability due to local regulations.