Рет қаралды 13,124
#PdfToGcode #inkscape #fusion360
This video shows how I generated the g-code for a Mig29 from a PDF plan. I used it in the CNC Needle Cutter video. • CNC Needle Cutter for ...
The following free software was used to create the g-code:
Inkscape inkscape.org/
Fusion 360 www.autodesk.co.uk/products/f...
OpenBuilds Cam software.openbuilds.com/
This process works well for me but there are other ways and software to do this with.
If you just need the DXF files then this process will work as well. Just miss out on the last step using the CAM software.
This process can be used on different types of CNC machines such as laser cutter, milling, routing and plasma cutters.
There is a posting on the website here with details and links rckeith.co.uk/pdf-plans-to-g-...
** Be aware that I will not be sharing the g-code or DXF files out of respect to the designers. Please support them as I have done. **
PDF Plans Links
jetworks.online/
www.frcfoamies.com/
www.rcpowers.com/post/rcpower...
forum.flitetest.com/index.php...
Chapters
00:00 Intro
02:40 Software
06:35 PDF Plans
12:03 Edit PDF with Inkscape
18:51 Load into Fusion 360
25:49 Fixing gaps
32:49 Create new DXF
43:52 Generate G-code
52:44 G-code running cutting parts
53:27 Next video