No video
Pedalboard Build for a Studio Legend
Рет қаралды 83,691
Күн бұрынToday, I’m building a rig for the iconic session guitarist, Paul Jackson Jr.
Even if you haven’t heard of Paul Jackson Jr., you’ve undoubtedly heard his guitar playing. Paul has worked with nearly everyone in the music industry, from Michael Jackson to George Benson. Our goal with this rig is to provide all of Paul’s signature tones in an uber-compact, flyable form factor, relying heavily on the BOSS GT-1000 and Musicom Lab EFX-LE.
Let us know what you thought of this rig build in comments below!
Table of Contents:
00:00 - Introduction
01:25 - What's Going on Paul's Board?
02:58 - Powergrip Velcro
04:26 - Power
06:42 - Audio
08:28 - Buffering
09:48 - Pedalboard DONE
10:29 - Paul Demos Pedalboard
18:08 - Outro
RECREATE PAUL'S INTERFACE
Wiring Diagram: bit.ly/3fNXRUY
Drill Template: bit.ly/3umS5Pm
Other DIY Interface Options, Materials List, and MORE:
www.vertexeffe...
⬇️Private Tone Consulting from the Rig Dr. ⬇️
therigdr.com/c...
🔽Buy our Pedals/Pedalboard Materials🔽
Zip Ties: www.therigdr.c...
Tie-down Mounts: www.therigdr.c...
Velcro: www.therigdr.c...
Pedalboard Patch Cables: www.therigdr.c...
Instrument Cables: www.therigdr.c...
Pedalboards: www.vertexeffe...
VERTEX Pedals: vertexeffects....
⬇ DIY BUFFER INTERFACE DIAGRAMS, TEMPLATES, & MATERIALS ⬇
Mono - vertexeffects....
Mono w/Tuner Out - vertexeffects....
Mono w/Splitter - www.vertexeffe...
Mono w/Audition Loop - vertexeffects....
4 Cable Method (FX Loop) - vertexeffects....
Wet/Dry - vertexeffects....
Stereo - vertexeffects....
🔻 //rig consulting//🔻
therigdr.com/c...
🔈 //podcast//🔈
Apple: apple.co/36dSQzK
Spotify: spoti.fi/2WGLku8
⬇ RECOMMENDED MATERIALS ⬇
some urls below contain affiliate links
//buffers//
Vertex DIY Buffers - vertexeffects....
Mesa Boogie High-Wire (dual buffer) - bit.ly/2lZwS0s
TC Bonafide Buffer (x2 input + output) - amzn.to/2vrTSug
Truetone Buffer (x2 input + output) - amzn.to/2NLDA8l
//power supply//
CIOKS 7 - amzn.to/3d4qOty
CIOKS 8 - amzn.to/2zW5YOn
CIOKS 4 - amzn.to/33jWAOZ
Strymon Zuma - amzn.to/3dpZANe
Strymon Zuma R300 - amzn.to/2ZgLclt
Truetone CS6 - amzn.to/2wWLbII
Truetone CS7 - amzn.to/2x1Nf2k
Truetone CS12 - amzn.to/33rfLq3
Voodoo Lab Pedal Power 3 - amzn.to/3asqK6r
IEC Plug Covers - bit.ly/34fpGl3
//dc power cables//
2.1mm DC Power Plugs (right angle) - bit.ly/2pGqXzI
2.1mm DC Power Plugs (straight) - bit.ly/36wd1sA
Bulk Power Cables (pre made) - amzn.to/3ev1q0t
//midi//
MIDI Plugs (right angle) - bit.ly/2oKHDFG
MIDI Plugs (straight) - bit.ly/32fNNLF
MIDI Cable (bulk) - amzn.to/2tPAHWQ
//velcro//
Vertex Super Lock - therigdr.com/c...
//cable management//
Zip Ties - www.therigdr.c...
Tie Down Mounts - www.therigdr.c...
Tone Essentials Kit - www.therigdr.c...
//pedalboard tools//
Soldering Iron - amzn.to/2TTdMI4
Solder (60/40) - amzn.to/2U7XhsD
Solder Dispenser - amzn.to/2GpgMpR
Octopus Arms - amzn.to/2V3O8OD
Wire Strippers (30-20 AWG) - amzn.to/2BBMI6n
Wire Strippers (20-10 AWG) - amzn.to/2EbhBR3
Wire Snips - amzn.to/2EazwqU
Vise - amzn.to/2E9eTLO
Heat Gun (embossing gun) - amzn.to/2BwGdlm
Label Maker - amzn.to/2BCBcHU
Label Maker Tape (black) - amzn.to/2Cd3CZe
Label Maker Tape (clear) - amzn.to/34piDD4
Deoxit D5 Contact Cleaner - amzn.to/2GEm4gu
Truetone Milliamp (mA) Reader - amzn.to/2F9v3VN
Tone Brush - amzn.to/2HIfze3
Upholstery Crow Bar - amzn.to/2HIOU0K
Multimeter - amzn.to/2YW9BdE
Goo Gone - amzn.to/31rGJeS
👇 // diy diagrams // 👇
DIY Power Cables: vertexeffects....
DIY Interface: vertexeffects....
DIY Buffers: vertexeffects....
#PaulJacksonJr #PedalboardBuild #RigDoctor
@jensenbell 3 жыл бұрын
Paul Jackson Jr. was, is and continues to be the real thing. As artists come and go, producers rely on Mr. Jackson to ensure hits and great grooves and ideas. He was smart to go to Uncle Mason for his tools this year. I think he knows that The Rig Doctor is truly motivated to ensure quality for him... actually not only for him, but for everyone. This collaboration was as successful as can be. :)
@VertexEffectsInc 3 жыл бұрын
Love Paul, this was such an honor for us!
@Nightbreed82 3 жыл бұрын
I met Paul at a Guitar Center clinic back in 1996; I was 14. He signed a CD for me after the clinic (which I still have) and I remember him being the nicest guy in the whole world. I've sold most of my CDs over the years, but I will always keep that one. He was playing Gibson Nighthawks at the time, which was the first time I ever saw one in person. When the clinic began, you could hear him playing guitar, but was nowhere to be seen. Then all of a sudden Paul came walking up from the back, towards the front of the room, walking right by me as he played the intro song.....man, it was so rad. He eventually busted out with some Michael Jackson Thriller riffs and it gave me chills. One of my best memories from that time in my life was that clinic and meeting Paul Jackson Jr., a true guitar legend.
@VertexEffectsInc 3 жыл бұрын
Sounds like Paul! Great guy!
@VertexEffectsInc 3 жыл бұрын
What do you think of this travel rig we built for Paul Jackson Jr? Let us know in the comments below! Table of Contents: 00:00 - Introduction 01:25 - What's Going on Paul's Board? 02:58 - Powergrip Velcro 04:26 - Power 06:42 - Audio 08:28 - Buffering 09:48 - Pedalboard DONE 10:29 - Paul Demos Pedalboard 18:08 - Outro
@jerrygonzalez2046 3 жыл бұрын
...
@thechronicnoizeco.6675 2 жыл бұрын
That’s the cleanest I’ve ever heard a guitar with humbuckers.
@VertexEffectsInc 2 жыл бұрын
Yes!
@gregmize01 3 жыл бұрын
Why do I have two compressors? Because I can. ---LEGEND
@VertexEffectsInc 3 жыл бұрын
Yes!!! Only he can pull it off!
@drebatista 3 жыл бұрын
@@VertexEffectsInc he and Lowell George
@LEOsoulMonarch 2 ай бұрын
*In 2chanz-esque fashion* 2 COMPRESSORS!!! Paul Jackson Jr. rocking two compressors is completely justifiable. Because man's gotta stay applyin' pressure.
@Clopezl01 3 жыл бұрын
why do I have two compressors? Well, becouse I can!. Best line ever!
@VertexEffectsInc 3 жыл бұрын
😂😂😂
@seankent1807 3 жыл бұрын
PJ is an unsung hero! Amazing player that most people don’t even know about. Great rig build, great sounds, great artist!
@VertexEffectsInc 3 жыл бұрын
He’s one of the best in the biz!!!
@sifender56 3 жыл бұрын
Love Paul’s playing!!! 🔥🔥🔥
@VertexEffectsInc 3 жыл бұрын
Don't we all!
@Tone2town 3 жыл бұрын
Paul Jackson’s classic line, “ Why do I have two compressors… because I can”. What a true Boss! 😎
@VertexEffectsInc 3 жыл бұрын
❤️❤️❤️❤️
@stephennowels1909 3 жыл бұрын
So cool. I’ve admired Paul Jackson Jr’s work for many years. That’s an amazingly small rig for a system that is so versatile and all encompassing. Clearly a happy end result as evidenced by the smile on Paul’s face. Great job, Mason!
@VertexEffectsInc 3 жыл бұрын
Couldn't agree more!
@Daniel-rg9sl 3 жыл бұрын
He has such an endearing personality. The excitement in his voice when he first sees the rig. Haven’t seen that kind of giddiness out of the other pros who mason builds for - maybe they’re jaded, maybe that’s just not their personality. Either way, it’s nice to see someone as established and legendary PJJ still acting like a kid on Christmas morning. Great dude. Great vid.
@VertexEffectsInc 3 жыл бұрын
Paul definitely put on a show for us! But I think that’s his personality, and his way of showing appreciation. It was really fun experience and build
@Daniel-rg9sl 3 жыл бұрын
@@VertexEffectsInc What a gem. Thanks for all the great content amigo. My signal chain appreciates it :)
@hummarstraful 2 жыл бұрын
Just awesome you got Paul to participate in a build and succeeded his expectations. Much respect, Mason
@VertexEffectsInc 2 жыл бұрын
Thanks for watching!
@tomt55 3 жыл бұрын
Amazing rig for an amazing player. It was really nice to see the build process and then have Paul discuss and the demo the finished board for us. So cool! I've been enjoying going through your video archive and watching some super helpful videos on board builds. I am a home hobbyist and just starting to build a couple simple boards myself. Please keep this type of informative and entertaining content coming. Thank you, Mason! Terrific video!
@VertexEffectsInc 3 жыл бұрын
🙏🙏🙏 thanks for watching and for the support!
@Mindartcreativity 3 жыл бұрын
Excellent playing and tone! It really is in the hands because that was a prime example. Thanks for this video.
@VertexEffectsInc 3 жыл бұрын
Paul’s got the magic hands!
@gbaren 3 жыл бұрын
Cool build plus Paul's fingers and soul=Magic
@VertexEffectsInc 3 жыл бұрын
Oh yea
@jerrygonzalez2046 3 жыл бұрын
What an amazing job you have done, Mason! I’ve being working on my board as well; I am integrating a GT1000 as the brains of my rig. I hope, I’ll do a good job as you did with Paul’s. Thank you for all the teaching videos you have posted. They are extremely helpful for people like me that are learning how to build their own pedal board themselves. Once again, Thank you.
@VertexEffectsInc 3 жыл бұрын
My pleasure! I’m so glad you found it helpful
@RichardWatson 3 жыл бұрын
Killer build! And man, is Paul's enthusiasm infectious- what a great dude!
@VertexEffectsInc 3 жыл бұрын
🙏🙏🙏 thanks for watching Richard!
@eriksonderlon 3 жыл бұрын
Great video! One of your best, Paul Jackson Jr. is a Gem!
@VertexEffectsInc 3 жыл бұрын
Thanks for watching! Yes he is!
@Souldoubtrocks 3 жыл бұрын
What a sweet guy. Dude that’s awesome that he made a follow up video. I’d say you have a very happy customer. And one hell of a player. Congratulations mason.
@VertexEffectsInc 3 жыл бұрын
🙏🙏🙏
@joshuaraysummey7679 2 жыл бұрын
Love him as a player, now with a little insight on how he thinks, I love him even more! This was great!
@VertexEffectsInc 2 жыл бұрын
Paul is great!
@jackprice7828 3 жыл бұрын
Paul is one of those behind the scenes incredible session players. He is an incredible artist/guitarist.
@VertexEffectsInc 3 жыл бұрын
Absolutely one of the best in the biz!!!
@michaelgregory2231 3 жыл бұрын
Very cool! PJ is one of the sweetest cats in music.
@VertexEffectsInc 3 жыл бұрын
Couldn't agree more!
@Grant_Ferstat 3 жыл бұрын
Love listening to Paul. I was grooving in the office chair at work.
@VertexEffectsInc 3 жыл бұрын
He’s so amazing! It was a real honor for us
@NickGranville 3 жыл бұрын
Great work as always Mason! PJ is a legend and hero of mine too
@VertexEffectsInc 3 жыл бұрын
Yes, a hero! Love Paul!
@Scott__C Жыл бұрын
Great rundown and I like that you show us how to DIY. When I was young I didn't know all those session player names, but Paul is the man. Another one who makes it look so effortless.
@nic0c 3 жыл бұрын
Nike Air max uptempo 95..stepping on the pedals with some drip
@VertexEffectsInc 3 жыл бұрын
Heck yea!
@traceyoungs1637 3 жыл бұрын
That's an amazing rig...it makes the case for a switcher & midi seem more practical and less overwhelming!
@VertexEffectsInc 3 жыл бұрын
Yes indeed!
@hugomartinho2555 Жыл бұрын
Congrats Mason, working with Paul Jackson Jr is like working with Music Royalty, amazing! Cheers. HM
@michael_caz_nyc 3 жыл бұрын
Great rig. Fantastic guitar player. Always been a fan of his work with: Michael Jackson, Madonna, Anita Baker, Patrice Rushen, Luther Vandross & Michael McDonald (among others). oNe LovE from NYC
@ivanvranic7860 3 жыл бұрын
There is also a Boss ms-3 as a 150$ cheaper option.
@VertexEffectsInc 3 жыл бұрын
One of the best of the best!
@VertexEffectsInc 3 жыл бұрын
cool Ivan!
@chrissterrmusic 3 жыл бұрын
Very inspiring... you're slowing convincing me to step into this brave new world of midi switching, etc, etc...
@VertexEffectsInc 3 жыл бұрын
One step at a time!!!
@Rikk_Klaww777 3 жыл бұрын
That drive with effector on it..so clean and singular sounding.! Amazing can only imagine how huge it would be at f.o.h..😐😮
@VertexEffectsInc 3 жыл бұрын
Truly a great sounding rig!
@MultiGuitarDave 3 жыл бұрын
Great sound. Paul is one of my favourite guitarplayers
@VertexEffectsInc 3 жыл бұрын
Mine too!
@davidperaza9526 3 жыл бұрын
What an icon!! PJR is one of my favs of all time, such a chameleon!!!
@VertexEffectsInc 3 жыл бұрын
The best!
@euphoricguitars8154 3 жыл бұрын
Wow! Wicked job as always. That switcher is epic.
@VertexEffectsInc 3 жыл бұрын
Thanks!
@GrantEllman 3 жыл бұрын
Awesome vid. My former guitarist was lucky to have PJJ as a mentor. Such a cool guy.
@VertexEffectsInc 3 жыл бұрын
Absolutely!
@EricLyke 3 жыл бұрын
PJ is such a beast - cool build for such a legend!
@VertexEffectsInc 3 жыл бұрын
Yes indeed 🙌
@alguitarchristie 3 жыл бұрын
Great improvement from the last video, where we hear the artist demoing the board as well as seeing the build, isn't that what we all want to see guys? :)
@VertexEffectsInc 3 жыл бұрын
Know that it’s not something that we are inducing, but more of the level of comfort of the artist and the way that the shoot went. Some guys are happy to really noodle around, other guys are much more abbreviated. Of course we always prefer more guitar playing, but that’s not always in the cards.
@alguitarchristie 3 жыл бұрын
@@VertexEffectsInc well we have seen pretty much how to build pedal boards now, if I see one of my guitar heros, I want to see him playing the board! If I'm the only one then fine! I will probably just stop watching after a while!
@WarrenPostma 2 жыл бұрын
Those mini expression pedals are super cool.
@VertexEffectsInc 2 жыл бұрын
I think so too!
@Brandon-so9fp Жыл бұрын
His tone is incredible.
@VertexEffectsInc Жыл бұрын
Yes indeed
@johnclark1925 Жыл бұрын
Wow that was outstanding! I learnt a lot from that… I am going to revisit buffering… thanks for sharing. PJ is amazing
@albertplaysguitar 3 жыл бұрын
"... because I can!" There's a man who knows what he wants.
@VertexEffectsInc 3 жыл бұрын
❤️❤️❤️
@jm879 3 жыл бұрын
Broo that cable job is so clean and awesome
@VertexEffectsInc 3 жыл бұрын
🙏🙏🙏 If you’re interested in doing the same we have several videos the detail some of these techniques. We invite you to check it out so you can follow our same technique
@BipityBopity93 3 жыл бұрын
15:08 “now to have a sound that makes no sense at all” Every P&W guitarist: 😔
@VertexEffectsInc 3 жыл бұрын
hahahahaha
@Matthew_Scan 3 жыл бұрын
Good to see a Boss GT 1000 there as good if not better than the Helix in my opinion that’s my kind of board just need to save up for a switcher GT 1000 and board
@VertexEffectsInc 3 жыл бұрын
Thanks for watching!
@Jay-fp4ii 3 жыл бұрын
Okay, he sold me! I want a Paul Jackson board!
@VertexEffectsInc 3 жыл бұрын
Go for it! Between our videos in the resources here you can definitely DIY something very similar if not exact
@crumpred805 3 жыл бұрын
Paul is so awesome. Great video.
@VertexEffectsInc 3 жыл бұрын
🙏🙏🙏 thanks for watching!!!
@bobbysbackingtracks Жыл бұрын
Great vid Mason. Negative Girl/ Steely Dan/Paul Jackson Jr.....nuts
@josephforbes9857 Жыл бұрын
Love the cleanliness of the tone
@juan_de_laura3041 3 жыл бұрын
Este video estaba esperando!!!! 👏🏼👏🏼♥️
@VertexEffectsInc 3 жыл бұрын
🙏🙏🙏
@juan_de_laura3041 3 жыл бұрын
Super cool!!! La verdad hacen un excelente trabajo!!! 👏🏼👏🏼♥️🙌🏼
@frostedhead Жыл бұрын
That cloudy reverb is sounding proper! that Alex Lifeson Hemisphere ish!
@dfgre247 7 ай бұрын
Such a cool dude and amazing player. Great video.
@JJDPROMEDIAPRODUCTION 3 жыл бұрын
My guy!! Paul Jackson Jr!!
@VertexEffectsInc 3 жыл бұрын
Yessir!
@bobpattersonmusic Жыл бұрын
Wow, this is a small rig? I drool!
@planzed.2 Жыл бұрын
Awesome board & video, thanks guys!! Great to see a GT/Core - very powerful little box
@VertexEffectsInc Жыл бұрын
Glad you enjoyed it!
@jameshalbert181 3 жыл бұрын
I use a Jackson Audio Bloom with an SP comp . I thought I was a little nuts for this. Looks like I'm in good company
@VertexEffectsInc 3 жыл бұрын
👍👍👍
@Velvetnos 2 жыл бұрын
Love your videos, just bought the new vertex pedal, power supply and have back order your buffer for the board. Thanks for the quality content and info!
@VertexEffectsInc 2 жыл бұрын
Great to hear!
@maxsalasr 3 жыл бұрын
PYT , Paul shines on that song
@VertexEffectsInc 3 жыл бұрын
Heck yea!
@gprz843 3 жыл бұрын
Thank you for sharing your knowledge man.
@VertexEffectsInc 3 жыл бұрын
My pleasure anytime!
@316word Жыл бұрын
Wow, he actually likes the boss GT 1000 I keep wondering which one of these things to get and it’s so cool to see you know ace guys like that still like boss considering all the things that are out like helix ,fractal audio ,quad core so on and so on
@zomuz3685 3 жыл бұрын
Nice work!! 😍👍🔥
@VertexEffectsInc 3 жыл бұрын
🙏🙏🙏
@scottpeters4401 3 жыл бұрын
Speaking of famous pedal boards,I saw a video of Paul Gilbert’s board today...he had a little box which I am assuming was a kick drum sensor in a little round padded box....So when he tapped his foot on it,sounded like a kick drum....Have you ever done something like this?I would like to figure out how to make one..
@VertexEffectsInc 3 жыл бұрын
I haven’t done anything like this, however I’ve seen several people do similar things with even microphones to become tapable pedals for looping.
@Valdenoyo 3 жыл бұрын
Amazing work man! 🔥🔥🔥🔥🤙
@VertexEffectsInc 3 жыл бұрын
🙏🙏🙏
@jimvolcano 2 жыл бұрын
amazing as always Mr. Marangella. :-)
@VertexEffectsInc 2 жыл бұрын
Thanks again! Hope we earned your subscription!
@miguelferrariart 3 жыл бұрын
NOthing but the best!!!! LOve PJ!!!
@VertexEffectsInc 3 жыл бұрын
🙏🙏🙏 yes absolutely
@koolbreeze8698 3 жыл бұрын
Every time i hear a song on the Smooth Jazz radio that I have to know who is playing guitar it is Paul jackson Jr
@VertexEffectsInc 3 жыл бұрын
🔥🔥🔥
@manuleduc9465 Жыл бұрын
Thank you for this great vid, this is a fine mix of art, craftsmanship and passion. It's enriching at any level. (same kind of feel with Wendy Melvoin episode) Thank you again...and again. Any chance you'd do a similar thing with Michael Landau please ?
@EthanCaouette 11 ай бұрын
My goal is to someday have a pedalboard rig built by pros like you guys. I know I couldn’t do all of this myself.
@tommyburnhamsmusic 3 жыл бұрын
Really really great. Love PJJ
@VertexEffectsInc 3 жыл бұрын
Best of the best!
@terrymiller111 3 жыл бұрын
Great tone!
@VertexEffectsInc 3 жыл бұрын
The best
@ramon2008 2 жыл бұрын
This pedalboard is really inspirational! It seems so versatile it actually inspired me to get the gt-1000 core! I’m wondering what anyones thoughts are on that vs the hx stomp.
@VertexEffectsInc 2 жыл бұрын
Both are great!
@instyle63 3 жыл бұрын
One of my favorite players...lots of cool stuff in this vid but the coolest thing is that guitar strap. Anyone know where I can find that?
@VertexEffectsInc 3 жыл бұрын
Levy’s strap!
@jazzydog 3 жыл бұрын
Awesome video👍👍
@VertexEffectsInc 3 жыл бұрын
Thanks for watching!
@jackprice7828 2 жыл бұрын
I would be interested in hearing how Paul likes the GT 1000.
@VertexEffectsInc 2 жыл бұрын
Seems like a keeper!
@ramon2008 2 жыл бұрын
Gt-1000 is amazing
@joejohnson8966 11 ай бұрын
11:08 I love his sense of humour.
@ikky2375 Жыл бұрын
Thank you for sharing
@tomfoolery2082 3 жыл бұрын
Because i can . Yeah man , thts great .
@VertexEffectsInc 3 жыл бұрын
Only he can get away with two comps!
@arielista 3 жыл бұрын
Sounds killer
@VertexEffectsInc 3 жыл бұрын
🙏🙏🙏
@felixjordanguitar Жыл бұрын
Amazing Mason
@harrysearia1784 3 жыл бұрын
👨🏿⚕️PJJ OMG 👏🏾👏🏾👏🏾👏🏾🔥🔥🔥
@VertexEffectsInc 3 жыл бұрын
Yes indeed!
@juancremscaleitor 2 жыл бұрын
Un sonido fantástico. Great!!
@VertexEffectsInc 2 жыл бұрын
🙏🙏🙏
@reverendg5937 2 жыл бұрын
Thanks
@VertexEffectsInc 2 жыл бұрын
Welcome
@andrewbettis4247 3 жыл бұрын
Awesome
@VertexEffectsInc 3 жыл бұрын
Thanks for watching!
@aiden3558 3 жыл бұрын
okay okay okay, what's the song you put in at 5:00?!?!?! too hard to pay attention with all that groove!
@mikerandle9489 Жыл бұрын
The Ray Parker Jr Jams PJ2 played on!
@thomasvernerrasmussen5044 3 жыл бұрын
Great video and thanks for sharing your knowledge! I have one question, how do you connect the buffer to the switcher, amps and boss gt-1000? I can't dig it from your buffer diagram.
@VertexEffectsInc 3 жыл бұрын
Guitar goes to input buffer (or wireless), then to Musicom input. Output of Musicom goes Boss GT1000 input. Boss GT1000 goes to amp input. Amp FX send goes to GT1000 return. GT1000 feeds the H9 in stereo and H9 feed the dual output buffers in stereo to the stereo amps with effects loops.
@1Blastarr 3 жыл бұрын
From a tech-head's opinion, this setup is almost beautiful.
@VertexEffectsInc 3 жыл бұрын
Thanks for watching!
@spiralganglion7940 2 жыл бұрын
Way to go Mason & Paul & all involved, this is a great video! Do you prefer to organize a Vertex Travel Plus MKII w/TP2 riser with a Strymon Zuma/Ojai or a Cioks DC7/DC4 combination? The Cioks requires more width space under the riser than the Zuma. The Cioks DC4 can be mounted under the riser it appears, which is a nice bonus. Love the channel Mason! Thank you
@VertexEffectsInc 2 жыл бұрын
They both work great for different applications.
@thewindowguy43 2 жыл бұрын
Very very nice
@VertexEffectsInc 2 жыл бұрын
Thanks a lot
@alexguitarfan6447 3 жыл бұрын
I think Paul Jackson played on some Luther Vandross records in the 80s?
@VertexEffectsInc 3 жыл бұрын
Yes indeed!
@ramonmoreno8014 Жыл бұрын
man I wanted to hear the filter
@ThePenfold 3 жыл бұрын
How do you label the power supply? Do you think a simple Dymo label maker would be safe on the Zuma chassis and easy to take it off without glue traces?
@VertexEffectsInc 3 жыл бұрын
You really wanna use acrylic labels
@hamton1414 3 жыл бұрын
I would like to know, were to put my HX Stomp, with this buffer method, I really dont know were in the chain it must be
@VertexEffectsInc 3 жыл бұрын
Same place he put his GT1000
@joshuamorris1630 3 жыл бұрын
Can I please ask why you added a buffer when there is on in the Musicomlab LE switcher? I'm running a rig with a Musicomlab Mark V and am contemplating a re-jig - should I be adding a Buffer, or is the one in the Mark V sufficient? Thanks for all the brilliant vids!
@VertexEffectsInc 3 жыл бұрын
Were using the output buffers going to the front of the amplifier, but the input Buffer is Bypass because of the wireless defeat and the fact that if the wireless is running that’s already lowering the input impedance so there wasn’t much of a reason to have two buffers back to back. And then the input buffer for the corded input I was so that he didn’t have to go into the software and re-enable the input Buffer each time he went with the cable into the input of the interface. The two stereo output Buffers are for the returns of the fx loop. MusicomLab system couldn’t have performed that function anyway. I think it was used as effectively as it could be given the situation, but I have no complaints about the Buffers inside of that system, I think that their among the best of any switch your company.
@joshuamorris1630 3 жыл бұрын
@@VertexEffectsInc Thanks so much for the great reply, and the ongoing commitment to such great content!
@shellsjoint 3 жыл бұрын
amazing!!
@VertexEffectsInc 3 жыл бұрын
🙏🙏🙏 thank you for watching!!!
@maxisingleone 3 жыл бұрын
What reverb from H9?? I only use the cosmic reverbs on this pedal, but the reverbs on the video sounds so good... what type is using?? 🎸⚡
@VertexEffectsInc 3 жыл бұрын
I think it was all from the H9. I don't know the patches he chose. We made them up on his phone app right before the shoot.
@donnaillingworth2311 3 жыл бұрын
The first bored I’ve seen on this channel that didn’t have a vertex effects pedal on it.
@VertexEffectsInc 3 жыл бұрын
There are several that have none of our pedals on their. You might be able to make a case that the buffer is technically one of ours, but really, there are certainly other ones on here - there is not a prerequisite requiring our pedals.
@kostis6 3 жыл бұрын
I’m thinking of powering the CIOKS 4 with a powerbank. Wouldn’t it be a great solution if wanted to eliminate noise at least during my recordings? What is your opinion about this? Thank you doc!
@VertexEffectsInc 3 жыл бұрын
Depends what you're trying to power I suppose. We have a buyer's guide video for power supplies you might wanna watch.
@JonHoltMusic 3 жыл бұрын
I've been using the DD-500 and RV-500 for years. I've been thinking about consolidating down to just the gt -1000 core, but I don't see a lot of hype behind that pedal. Would love to get my hands on one to try it out. Any thoughts on that pedal? I have an HX Stomp on my small rig, but the gt-1000 core seems to be a lot less limiting than the HX.
@danieltravis5082 3 жыл бұрын
I would only go to the GT1000 if you use only the very basic preset type sounds (and none of the advanced features of the 500 series) Otherwise I honestly think you would be seriously limiting your options and effectiveness
@JonHoltMusic 3 жыл бұрын
@@danieltravis5082 why do you say that? Boss says that the gt1000core has the 500 series fx built into it.
@danieltravis5082 3 жыл бұрын
@@JonHoltMusic it doesn't have all the same presets, nor anywhere near the routing and auxiliary options. If you really think it's actually going to replace two 500 series pedals, you've already made up your mind though 🤷♂️ Good luck.
@arschi6554 3 жыл бұрын
@@JonHoltMusic correct. But Boss doesn't say ALL fx! And comparing the manuals there are some missing.
@JonHoltMusic 3 жыл бұрын
@@arschi6554 interesting. I’ll have to look into that.
@gtrkit 2 жыл бұрын
Nice!! I'm looking for the exact pedalboard and effects. Kindly Message me the total price you would charge for this type of project.. Thank You..
@VertexEffectsInc 2 жыл бұрын
Hey Keith, we don't provide the service of rig building. But you can reach out via therigdr.com and book a consultation. www.therigdr.com/products/private-tone-consulting
@BlackRootsUNLIMITED 2 жыл бұрын
Beautiful. That Guitar sounds CRISP👌🏿 Hopefully I'll get one made for Bass 😉 Greetings from Uganda 🇺🇬👊🏿🖤
@VertexEffectsInc 2 жыл бұрын
Wow! Thanks!
WIRED
Рет қаралды 1,5 МЛН
Michael Klein
Рет қаралды 201 М.