No, because CarPlay occupies the audio channel of Android. At the same time it cannot display other interface. But you can use other apps on your phone at the same time.

Pls select the oem camera: Settings>system> camera selection> oem camera

Respect your decision very much.

Hello, Jake, Pls send me Email, i send you software of android. service@pempcar.com

I saw a video on your channel showcasing the parking camera that looks exactly like the OEM NBT UI interface, but it was touchscreen. I assume that's a custom UI that is meant to mimic the NBT look - what is that UI called? Reply: id4 Also, it seems some people have to connect the AUX cable to get audio, and some don't. What is the difference? Reply: For cars that just switched to NBT in 2012, the AUX cable needs to be connected to the armrest box to get sound.

@@pempcar Thanks for the reply.

There is no need to insert a SIM card, it will also work. If your screen does not work, maybe the power is not turned on, please contact our service team service@pempcar.com in time, they will quickly respond to your questions.

It is not possible to listen to CARPLAY while listening to the radio, because both are audio, which is rather confusing. But you can listen to the radio of the original car. While using Android's Google Navigation. Methods as below: 1. Press the RADIO button to enter the radio; 2. Touch the screen to enter the Android interface, open Google Navigation, 3. At this time, you can listen to the radio while watching the navigation. When there is a navigation prompt, it will come out from the front left speaker or the center of your car.

Yes, your original car radio must work normally, because our product only replaces the original car’s display. Another reminder, this product is not suitable for the original car CCC host.

My CCC is completely disconnected since that shit don't work at all... I installed an aftermarket amp, and ran AUX from the amp... now I have audio using the sock speakers and it sounds great, better than my old Logic7 setup. I have an older version of this Android screen, and it works without the CCC, in fact my CCC is not even in my car anymore. So yes it can work. I just ordered this one for Carplay... I'll see if I can do a video about it and maybe show how I did the amp as well.

1. you can set the AUX to manual mode (settings-factory-070305-vehicle-aux swithing model-) then every time before you enter the android, you enter the front AUX mode first. 2. if the above method can not solve your problem, you can use the audio cable to connect AUDIO OUT to the armrest box AUX IN, you can refer to the following video to connect. kzfaq.info/get/bejne/rrKDntOhuNeRm4E.html 3. If the above two methods can't solve your problem, please contact our after-sales service team. service@pempcar.com

Thank you very much for purchasing a PEMP product, because there is no speed information in the data of this car, so this information cannot be displayed on the screen.

You can selet the oem camera option in the settigs. Settings/system settings/camera selection

Please confirm whether your 2pin green fiber optic cable has been moved to the Android ISO cable.

Please send your purchase order number to our after-sales team email: service@pempcar.com, they will reply to you.

You understand correctly that you can use all the functions of i-Drive when the Android is in the initialisation process. And you can also use the reverse function, it only takes 2 seconds for it to switch.

@@pempcar Ok many thanks, I will try it.

Please send your purchase order number to the PEMP after-sales service team at service@pempcar.com, they may be able to help you.

Maybe you need update the mcu version.

@@pempcar thanks i already done it. Now it works

Daer Daniel，It is recommended that you do not select Zink in the factory settings. Because when you choose it, you start Android and it will connect to the phone. If your Android software and Zlink version are too low, you can try to update it according to the following video. kzfaq.info/get/bejne/f5uUqcd3rcneaY0.html

@@pempcar Android is running on 12. The PEMP System shows System Ver: 12-662EA-868927051682248 and APP Ver: Ksw-S-M600_OS_v.1.1.4NEXAI. ZLINK5 shows Version V5.3.20. Am I uptodate? What can I update and if yes, in which order?

@@danielb.2537 Your Android 12 and the software are the latest versions and do not need to be updated for the time being.

Yes, when you use android auto, the phone is connected to PEMP android's hotspot. So you can not open PEMP's wifi. Otherwise, android auto will automatically disconnect.

Hello, Pls contack after-sales team, service@pempcar.com,Please indicate the product model or order number you purchased in the email, so that the service team can quickly respond to questions, thanks!

The Android part works the same, but the original car display is different from the e60.

After each selection, wait more than 10 seconds before restarting the PEMP device. You can refer to the following video to set up: kzfaq.info/get/bejne/bKqWoNN3yKzDfGw.html If you can't configure it correctly according to the video, please email our after-sales team to service@pempcar.com

Hello, Pls send our after-sales team email: Service@pempcar.com, thank you so much.

Pls send me email: service@pempcar.com

did you ever get audio??

@@Familytravel4fun yes I did, I had to connect an aux cable

@@ARLockdownproductions do you have the CIC or NBT version?

Sorry, currently there is not.

You only need to connect once, and then it will automatically connect to CarPlay every time, but you must open the Zlink app every time.

@kwane did you get this unit ? I’m trying to decide

@@reinoldg *Kwame. No I didn’t go with this specific one; I went with one on Amazon and it should be arriving in a few days. I will keep you updated.

@@Justobie82 I went for the one on Amazon for my X1 F48. Just received it but don't know if I should install it myself or have someone else do it for me cause I don't wanna fry the computer

@@pempcar how long does it usually take for zlink to connect? I just installed my unit yesterday and it takes forever to sync.

No, without sim card. It has a SIM slot and supports 4G SIM card insertion.

@@pempcar ok and is the head unit an exact fit for the dash? I saw somewhere it’s slight bigger

@@26rari13 Yes, this 10.25 vertical screen original car dashboard is a perfect match. I think it's the most perfect. There is also a 12.3, it will hang out. I will respect your choice: www.amazon.com/dp/B091CXX3HL?ref=myi_title_dp

Dear, you can Recovery System on the system imfo interface. if can not solve your question. can you take a short video and send it to our after-sales service team email: Service@pempcar.com Let us know your purchase order number by the way. thanks

@@pempcar i get the same problem and i have a iPhone 11 Pro Max

@@duhaneescoffery9328 pls send the order number and question to our service team: service@pempcar.com thanks

Android auto need connect the data wire to USB port of PEMP android. i will send you video how to connect android auto.

Does your car have a center speaker? Is the banging sound coming from the front left speaker? If this is the case, you can use the small speaker in the product package to solve it. You can refer to the following video to solve: kzfaq.info/get/bejne/Y9aloKapnLbQj5c.html If you still have any questions, please contact our after-sales team in time,service@pempcar.com

070305