I put a lot of thought into it!

*nods*

Bait em' with the thumbnail, lecture em' with the data XD

Like a fox =P

I'll do that in future!

Credit where it's due: Tenobaal is the one who tipped me off that my OG video was wrong! HIT HIM WITH BROOMS!

Burnin' up!

I don't always see... but when I do, it's what I did there XD

Now I know what sells!

I'm going to have to do more like that, then XD

It's a good change - giving each of the factions their own personality... Too bad fire resist is kind of meh...

Pick implies I didn't make that shit LoL

You're not even kidding.

So, Averter or Omamori on the cabin with The Call fused for 10% more durability, running Grizzly (of course), covered in Hyperborea with an internal structure of Steppenwolf rocking Armored Tracks. =P

@@cardboardninja2429 W🤝New meta incoming! :D

See, not everything is about the Clickbait XD

Behold the power... OF MATH!

I think I remember that... I remember carrying hard... XD

Blast resistant parts can be right behind bullet resistant parts, depending on how durable the bullet resistant part is.

Heavy and slow? Incinerator, hands down. Retchers of course rip through heavy builds. Other than that, heavy builds tend to fall to cannons of all types over distance.

But ain't nothin' can withstand you

*squints*

Thomas is right!

There isn't any armor that you would use to defend yourself against your own porcs - the issue is that the thermal damage is going to pass through your whole build regardless of the parts that you use, and if it hits your generator with the fire... Ultimately the best thing to do with Porcs, even your own, is to not get hit.

Bigrams bud....they lift your ride up higher

@onestar1017 they're to slow i been useing gurida but u still take damage

Maybe dump porcs and stop pushing so hard...

10 pin rule works only for hit-scan weapons (which have the functional equivalent of 100% "penetration). ALL projectiles can pass an infinite distance if they "penetrate" a part.

I think it's like a rocket in real life.

yes. Otherwise you could reach 100+% resistance with Bastion. We tested and even with every possible resistance you can stack the bastion still takes frontal damage. it gets reduced but the effectiveness of the reduction decreases with each aditionak instance. Otherwise Bastion 50% Fusion 10% Cohort-Teammate 30% Grizzly 30% Averter 30% would give you 150% which means immunity or even getting healed for taking damage. But thats not how it works.

@@GorillaGongo Yes but my actual question is: Cardboard Ninja said that the averter which gives 30% resistance actually gives something like 26% cause of how calculations work. But now he said that the upgraded 10% of the cabin is actually flat 10% but once you add more resistance it gets reduced. now my question is, is this rule true for all resistance? Are they all flat until we add more? Averter does give the full 30%? When used alone?

@@polus134 understood. but i cant give you proper to that right now. cardboard?

Alright, so I have a video about this... but assuming you don't want to watch the video that I made that completely explains damage resistance and damage reduction I'll just do it here: Damage BLOCKING (the kind granted by fusions, the Averter, Grizzly, etc.) is calculated as: Damage = Damage /(1+.X) Where .X is the damage reduction percentage. FOR EXAMPLE the Averter on your cabin makes all damage dealt to your cabin be DIVIDED by 1.3 (Averter being 30%). If you have the damage reduction fusion that's damage divided by 1.1. If you have damage reduction fusion AND the Averter then it's divided by 1.4. If you have a fully stacked Ermak perk and an averter AND the fusion then it's divided by 1.61, and if you added fully stacked Grizzly then it's divided by 1.91. So you never are "lied" to, per-se, and you don't actually get 'less' value out of having increased damage blocking, it's just that through the damage blocking formula damage asymptotes to 0, meaning you can never reach 0 regardless of the amount of damage blocking you get. SO, when I said that the 10% damage BLOCKING you get on the fusion functions identically to 10% bonus health, this is because the way that it calculates damage, it means the PART ITSELF is treated as though it has 10% more hitpoints. The amount of damage blocked is NUMERICALLY lower than a flat percentage of the same (because you DIVIDE DAMAGE TAKEN by 1.1, instead of multiplying by .9) but this evens out to be the exact equivalent of 10% more durability. Indeed, even the Averter with 30% damage blocking increases the EFFECTIVE HITPOINTS of the PART by 30% - basically meaning the resulting durability of the part is 30% more. In the above situation where you get 91% damage blocking (damage divided by 1.91) you effectively have 91% more health from your base part.

@@cardboardninja2429 Thank you for clarifying.

That's okay, I'll give you a like for wanting to drop 2 likes =P

De nada =D

Everyone piles bumpers onto their build because of 2 reasons: 1. It feels safe - when in doubt slather yourself in high hitpoint parts. 2. Bumpers have unique geometry that lends itself to being used to protect weapons. There should be no distinguishing between high powerscore hover builds and any other powerscore - placing high damage reduction parts as first in-line will simply dramatically reduce the amount of damage your build takes shot-for-shot.

Yes, the Snow Plow - and it's actually better than the Train Plow in stats (both lighter and more durability) with the "same" ish physical model.

@@cardboardninja2429 Yeah, just thought it was kinda odd that it's not classified as a "cast" part, like all the other parts from that event.

Knowledge is power =P

@@cardboardninja2429 yes

I think that it's a good thing - it creates value for the basic Van parts, since they can exist either deep in your build or on the surface =D

Basically parts with bullet resistance are excellent at reducing incoming damage

Bullet damage on top, blast damage underneath. Lots of parts are good, some a lot better than others.

You are literally the only negative comment I have received for my click-bait thumbnail XD

@@cardboardninja2429 the 1st time you used that thumbnail, your views dropped by around 1000, second time you use (this time) views drop of around 200. just tryin to help.

Ehhhh....