Perfect For Beginners! $270 Elegoo Mars 5 Ultra Resin 3D Printer
Рет қаралды 35,784
This is going to be the perfect resin 3D printer for beginners $279.99 Elegoo Mars 5 Ultra
Thanks to Elegoo for Sponsoring today's video!
Mars 5 Ultra $269.99 - bit.ly/Mars5Ultra
Mars 5 $179.99 - bit.ly/Mars5UJ
Saturn 4 Ultra $400 - bit.ly/Saturn4Ultra
Saturn 4 $300 - bit.ly/Saturn4UJ
Mars 4 Ultra $309 ➜ bit.ly/Mars4Ultra
amzn.to/44TKn1r - Amazon
Mars 4 $259 ➜ bit.ly/ElegooMars4
Neptune 4 Plus - bit.ly/Neptune4Plus
Neptune 4 Max - bit.ly/Neptune4Max
New PLA Colors - amzn.to/3tKK24A
Neptune 4 Pro $299 ➜ bit.ly/Neptune4Pro
Neptune 4 $259 ➜ bit.ly/Neptune4
NOW ON AMAZON ➜ amzn.to/44kLsiJ
Siraya Tech Fast Green Resin ➜ amzn.to/3XF8FMK
Files from todays video
Miniatures by Loot Studios
lootstudios.com
Leonardo Teenage Mutant Ninja Turtle by Printed Obsession
than.gs/m/1077124
Knight of Action by Witchsong Miniatures
www.myminifactory.com/object/3d-print-the-knight-of-stature-380414
Kaiju by Forits Mint
thangs.com/designer/FotisMint
Checkout MY PATREON / My 3D Printer Settings ➜ patreon.com/unclejessy
Make your own Resin 3D Printing Timelapses with Resinlapse ➜
linktr.ee/resinlapse
Some links on this page are affiliate links that help out the channel.
________________________________________________
My PATREON ➜ patreon.com/unclejessy
Buy Me a Coffee ➜ www.buymeacoffee.com/UncleJessy
_______________________________________________
Gear I'm Using ➜ www.amazon.com/shop/unclejessy
________________________________________________
Twitter ➜ UncleJessy4Real
Instagram ➜ unclejessy4real
Facebook ➜ UncleJessy4Real
KZfaq ➜ kzfaq.info
________________________________________________
Thanks for watching!
#3DPrinting #resin #tmnt
@UncleJessy 7 күн бұрын
Checkout the brand new Mars 5 Ultra & Mars 5 279.99 Mars 5 Ultra - bit.ly/Mars5Ultra 179.99 Mars 5 - bit.ly/Mars5UJ - affiliate links
@JustGee3D 7 күн бұрын
I'm just going to think of printers like PCs because a new one comes out every year and I'm always outdated 😫😫
@7kortos7 7 күн бұрын
and just like a PC i'm going to over buy so i can get 5 years out of them. I got two Saturn 4 Ultra coming my way after owning my Ender 3 V2 for a few years.
@AndreiPek 7 күн бұрын
I'm rocking saturn 2 and it's still perfect.
@jije69 6 күн бұрын
I got artillery sidewinder x4 coming on my way@@AndreiPek
@ImSandwich 5 күн бұрын
The price stays great too
@PrintedObsession 7 күн бұрын
Thanks for the shoutout Uncle Jessy. glad you liked the model.
@AndrewSink 7 күн бұрын
I’m sold. This thing looks AWESOME!
@Bob-el3iw 7 күн бұрын
Research the difference between resin & FDM printers, strengths etc.
@jasoncombs3232 7 күн бұрын
The tilting vat makes it worth every penny! My S4 Ultra has been running non stop since i got it. 😊
@Mrpancake72 7 күн бұрын
Mine hasn't been running... half the build plate. Garbage
@bigboi71 7 күн бұрын
Same here
@petercallison5765 7 күн бұрын
@@Mrpancake72 That is concerning and I bet they don't have enough spares in stock.
@kipicbloud 4 күн бұрын
I've been wishing I got a second one of these instead of my GK Two.
@AFireGnome 7 күн бұрын
Really excited to see this one. It's more budget friendly and I might actually be able to get it to fit in the space I have available. Thanks for sharing!
@pipdesignshop 7 күн бұрын
I have an FDM printer for work and would probably use a resin printer for fun, so it’s nice to see the progress and increased ease of use. 👍
@Eden_Xiii 7 күн бұрын
Great review, love your videos. Keep up the great work.
@arbitScaleModels 7 күн бұрын
to protect your resin tray, you really got to get a silicon scraper instead of that yellow plasic scraper
@Brettoh 7 күн бұрын
If it’s got a clean edge, both will do/wont do the same damage. Accept the sheet is a consumable and do what works best.
@Bpboshoff 4 күн бұрын
They should stop including those scrapers in the box.
@RisingApe 6 күн бұрын
Great review, like the fast slow comparison, I didn’t do that in mine!
@LycheeSlicer 7 күн бұрын
Great review, like always 👌
@Vertrucio 7 күн бұрын
If you're careful, and don't want to bother with the bib, you can hold a tray between the print and base when removing stuff. I use a quarter aluminum baking sheet.
@tonydaughtry9194 7 күн бұрын
Do you have any sort of set up to deal with/vent the fumes your resin printers put out? The fumes are the main thing stopping me from making the jump from FDM to resin.
@JellyGummy26 6 күн бұрын
Ive been wanting to get into resin printing for a couple years now but could never justify the price especially with canadian currency. But this printer is exactly what Ive been waiting for! It has all the features I want and is super affordable! I already pre-ordered it im super excited to receive it :D
@getbent57 7 күн бұрын
That Leonardo model turned out amazing.
@UncleJessy 7 күн бұрын
Agreed! So happy with how it looks
@RabbitBurrows 7 күн бұрын
Looks Turtletastic!
@someonenormal5579 5 күн бұрын
great ad thanks!
@krugrodrigo 6 күн бұрын
Hi @UncleJessy, great video! I work for Loot Studios, right in front of the artist Luis Negão, who designed the little dinosaur his work is AMAZING. My favorite one so far! This is amazing!
@luisnegrao4948 6 күн бұрын
Thank you so much my friend! It means a lot coming from you!!
@3DJapan 7 күн бұрын
I like that touch screen.
@LeonardGreenpaw 6 күн бұрын
Hey uncle Jesse. If you use a program like uv tools that can modify individual layers, by making the first few layers have a high wait before print time, more of the resin can be pushed out from under the build plate and that allows you to have a much better adhesion with a much lower burn in time. I use black abs like, and the burn in time is 2.5 seconds, there is no elephant foot and things are sticking so good
@ger5956 7 күн бұрын
I’m shocked you never heard about using a two step wash set up! It makes such a big difference in my experience. 😅
@UncleJessy 7 күн бұрын
haha yeah i've definitely heard it before and used it somewhat in the past but man oh man does it work well
@benjamin93436 7 күн бұрын
Uncle Jessy. I currently have a Elegoo Saturn S, and looking at ordering the Elegoo Saturn 4. Would it be wise to wait and buy this one instead? My goal is to utilize a machine for miniatures and hopefully speed. I wanted to see what your suggestion would be for me.
@herbveitenhans3285 7 күн бұрын
I don’t have an issue with the ease of use for resin printers. My problem is disposal of the alcohol and residue from cleaning.
@jimmycote808 5 күн бұрын
hi Jessy,i need to know if it's necessary to use an air purifier and the heater because with this printer?
@quyreansoulsealer4002 4 күн бұрын
Easy way to clean build plate and tools - put them in the ipa bucket when or after you clean your models
@readymadekhane8247 21 сағат бұрын
Question what's the gray resin you like using the most?
@pingbot261 7 күн бұрын
This would work great for me. I already ordered my S4u and its on its way haha. But the S4u is a dang bang for a buck. So is the M5U.
@dwilliams660 7 күн бұрын
I moved away from elegoo printers, I have the new Jupiter se, and had nothing but issues from day one, bought a uniformation and no issues from the start and the heated vat is a plus, maybe if they do a new Jupiter I may get that
@NOxHYPE 6 күн бұрын
What sort of ventilation do you recommend for something like this?
@MonteMorast 4 күн бұрын
It is interesting that no one is mentioning how the titling vat is also in the Prusa resin printer. Waiting for my Saturn 4 ultra to ship to me. So excited about these printers. I might also get a Mars 5 ultra.
@antoniomromo 7 күн бұрын
Love the video as usual good sir. Only gripe is the use of "auto leveling" when it should be "autozeroing". Chinese companies often have issues with the translation and marketing of technical details like this. So it's up to us native English folk to correct the information.
@LukeGoodwins94 6 күн бұрын
Are the release dates different for other countries? We still can’t get the Saturn 4 ultra here in Australia….
@happy14945 6 күн бұрын
Did they get their quality control right this time? I love the mars 3 but it died on me. just as 3 cure and wash stations. i was always sent a new one... This is looking incredibly interesting to me..
@LeonelRodriguezxlr 14 сағат бұрын
Can you do an update review on the auto bed leveling issues?
@leestevens3226 6 күн бұрын
What are the fume outputs like on this? I live in a flat with not much room to place something like this so I need to know what it's like to handle the fumes.
@N0a5301 7 күн бұрын
The only things is elegoo don't sell the PFA film for this printer but the FEP film like the mars 4
@UncleJessy 7 күн бұрын
Yeah, hoping they offer that soon along with extra Drip Trays
@boanoah6362 4 күн бұрын
One thing to note is that the Mars 5 has true 8K and can print at 18um so it's about as perfect for minis as you can get.
@LS3D_Printing 7 күн бұрын
Im soooo glad i didnt get the 4. THIS looks incredible
@LordOfJazz 7 күн бұрын
My Mars 3 Pro is still printing models like champ so I'll be skipping this one too. Though I do really love the new features.
@TanksWorkshopMinis 7 күн бұрын
I'm not worried about spills as much as moving parts. As in mechanical failure and/or maintenance.
@EricHernandez. 7 күн бұрын
I want see elegoo mars 5 a green
@Tryant69 7 күн бұрын
It's not really auto bed leveling though.. It uses springs under the build plate to basically always make it level when compressed but this does fuck up prints directly printed on the build surface because of too much pressure!
@kamui004 7 күн бұрын
Probably they're limiting the speed of the tilting vat to accommodate all types of resin so they don't splash, like for example I imagine with faster speeds and very thin resins.
@souledgar 7 күн бұрын
This. They don't want to be liable for any idiot user setting their thing up too fast and getting it all over themselves.
@UncleJessy 7 күн бұрын
ohh yeah that's very true
@sinakuma 7 күн бұрын
With the Saturn 4 Ultra, did you use fast speed or slow with your resin settings ?
@UncleJessy 7 күн бұрын
Fast speed with the Saturn 4 Ultra
@luisnegrao4948 6 күн бұрын
Wow, the baby dino that I modeled for Loot Studios got featured on Uncle Jessy, I'm so happy!!!
@UncleJessy 5 күн бұрын
Oh did you design that? I thought it was way too cool! I want to print it a lot bigger
@luisnegrao4948 5 күн бұрын
@@UncleJessy I actually made the 3D model based on the illustration by my friend Kevin Franciosi (which actually works at Loot Studios as well). It is so nice to know that you enjoyed the model. Thank you so much!!!
@PlasticGeek 7 күн бұрын
Yeah I had to break the rook on my first print to get it off, it was way too much exposure by default on those first layers
@UncleJessy 7 күн бұрын
Yeah the “normal” exposure times are way too much for these new plates
@DevilsBrushGaming 7 күн бұрын
My ultra 4 broke on print 1 not only did the fep sheet get a hole in it but the plate got a crack in it. So upset email elegoo hopefully gets sorted soon. Shame as think all this new tech from elegoo looks amazing. Back to my saturn 2
@Mrpancake72 7 күн бұрын
Mine won't print on the back half of thy plate so you are not alone
@DevilsBrushGaming 7 күн бұрын
@@Mrpancake72 such a Shane hope elegoo gets it all fixed for you
@tedcogley1939 6 күн бұрын
Omg I want a new saturn
@gamer23xd91 7 күн бұрын
Totaly off topic but does anyone know if elegoo i working on a jupiter se2? I'm thinking about getting a Jupiter SE but would really hate to see an anouncement like a week later
@UncleJessy 7 күн бұрын
I havent heard of a new version and the latest Jupiter I have on hand is the SE
@ikew3150 7 күн бұрын
SUCH A MASSIVE UPGRADE
@joerie.houthuijsen 6 күн бұрын
Hi Jessy, from who is that little baby Dino 🦖?😍
@TizianoFerrando 5 күн бұрын
hey man i have an idea for another video you coud print a star destroyer in the orange strom giga but like giant before it was 200% make it like 400% maibe idk
@tyronebrewer3219 7 күн бұрын
Thanks for the info the Elegoo Mars 5 Ultra printer.
@Rob741741 7 күн бұрын
How do you clean the resin off the top of the build plate?
@UncleJessy 7 күн бұрын
Leave it on its side for about 10 mins allows most of it to drip off. Then I will just shove some paper towel in there
@guilhermecarvalhotrindade2625 7 күн бұрын
Thanks, Jessy. This Mars 5 Ultra looks incredible for the price.
@UncleJessy 7 күн бұрын
agreed
@user-pk6ot6gx3x 7 күн бұрын
random question for anyone with a fdm printer I've had a lot of problems now it breaks when trying to start a print would love any advice
@UncleJessy 7 күн бұрын
It could be that the filament is been sitting out in the air for too long, is it brittle before you load it into the printer?
@sirkingjamz101 7 күн бұрын
I was wondering what that sound was in the BG of the video, at first i thought it was a song... which it is! the Makers song, The bed slinger printing sound :)
@voiceofreason1629 7 күн бұрын
Hey, Jessy! What's the best large resin printer available right now?
@Alphachanel 7 күн бұрын
Judging by what FauxHammer teased at the end of his review of the Mars 5 Ultra Elegoo might have an updated Jupiter coming out in the not too distant in the future.
@UncleJessy 7 күн бұрын
@@Alphachanel I havent heard of any new Jupiter news but man would a large tilting vat jupiter be pretty rad
@trebory6 Күн бұрын
Pro tip: Use some UV Resin to fill in the Elegoo logo.
@marchingknight11 7 күн бұрын
When you say there's no way to unlock faster speeds, do you actually mean it's just simply impossible to configure faster feedrates by manually creating a profile in the slicer? Are feedrates hard coded into the printer somehow?
@kamui004 7 күн бұрын
For the S4U and M5U, there's no lift/retract speed/height configurations in the slicer like old printers, that config space in the slicers is completely absent for these printers. The peeling is done by the tilting vat and its speed is hardcoded in the firmware with a "Slow" and a "Fast" speed, while the z-axis just barely moves up whatever layer height it is. In the other printers most print time was taken by the 5-10mm up-down movement of z-axis, while these ones is taken by the vat tilting down and up, but the tilt speed is hardcoded. I imagine they could be changed if Elegoo gave away the gcode files for people to alter, like it used to for people to mod the z-axis motor speed limits on older printers for the so called 'vroom settings". But I think Elegoo already tested and limited the speed of the vat tilt to accommodate all kinds of resin without any of them splashing due to too much speed.
@UncleJessy 7 күн бұрын
@@kamui004 Yeah, I believe its all "hardcoded" into the internal profiles of the printer for the Fast/Slow print speed settings
@xile6 6 күн бұрын
here little bro you can copy my homework. lol...... But this is still cool That the Mars line got some love. One day i will get a Saturn Ultra. I do have a OG Mars and Saturn S. So far it all works for me. But some speed would be nice.
@arduinotec9415 4 күн бұрын
Uncle, i live in Brazil. Can they sending these printers here???😢
@forrestegan 6 күн бұрын
There’s nothing on the Mars 5 Ultra that would get me to upgrade from my Mars 4 Ultra…I’m good, carry on. YMMV
@Old_Wizard_Minis 7 күн бұрын
quality difference between fast and slow?
@UncleJessy 7 күн бұрын
Zero that I could tell from my test print. It might be more apparent with different resins though or more beneficial with certain resins to print slower over faster
@dungeonsYdragons 7 күн бұрын
lol im still rocking my og mars pro thingiverse version i got for the same price years ago
@UncleJessy 7 күн бұрын
Heck yeah! nothing wrong with that at all! Built like a tank
@Nishant_More 6 күн бұрын
FLSun in the corner 😵💫
@jessemarshall7176 7 күн бұрын
I’m waiting for my Saturn 4 ultra to ship. It’s replacing my original mars pro printer
@UncleJessy 7 күн бұрын
You're going to love it
@jessemarshall7176 7 күн бұрын
@@UncleJessy I looks to be a great printer. Anything is better than my relic lol
@jessemarshall7176 7 күн бұрын
@@UncleJessy I got the air filter with it too. Have you used it? My wife complains about the smell from my old one so it only gets used occasionally
@kinedix 7 күн бұрын
@UncleJessy what is the name of the resin? Yellow-green?
@dextersamson8286 7 күн бұрын
Literally tells you in the video
@AFireGnome 7 күн бұрын
He's got a link in the description for the resin. Siraya Tech Fast Green Resin
@kinedix 7 күн бұрын
@@AFireGnome sorry didn't open "Show More" KZfaq changed design
@kinedix 7 күн бұрын
@@dextersamson8286 thank you, was missed this part, was skipping, will be more careful next time!
@UncleJessy 7 күн бұрын
Siraya Tech Fast Green - amzn.to/3xtphfT aff link
@LordNerfherder 7 күн бұрын
The drip tray does not work, it spills straight into the printers mechanisms and you need to pull it apart to clean it from uncured resin. There should be like a rubber gasket or something there. Biggest flaw probably.
@UncleJessy 7 күн бұрын
the drip tray covers the vat /sides & gap. Unless you manage to spill resin under the drip tray somehow. But agreed that a gasket of somekind would be a nice addition to prevent potential spillage issues
@greendoorinvestments 7 күн бұрын
I hate the flip top lid I like that this one doesn't have it I wish it was an option
@sespider 7 күн бұрын
I only have one printer. The Mars 2 for $200 back in 2021. This looks to be the same size as the Mars 2. Someone, please, list the advantages this printer has over the M2. Because I'm not really seeing a need for it.
@LyGuy13 6 күн бұрын
Print speed might be the only benefit for you?
@janineharris3601 5 күн бұрын
can i have this in a small apartment. do i need to have a mask on
@UncleJessy 5 күн бұрын
If you can use the vent port to pipe fumes out a window. I wouldn’t recommend printing in the same room you sleep in / spend the most time in
@msamyweber 7 күн бұрын
Jessy, the only issue I personally have with your content is, you are all about pushing speed, speed, speed. Bigger nozzles, larger layers. That might be good and fine for I dont know how many. For me, I stay with 0.03 layers and .04 nozzles. I got into 3D printing for the details and quality. Not just pumping out items. For you, ok, I can understand it is about getting content and videos made. But to forcefeed it speed, speed, speed and bigger nozzles onto everyone... I just dont agree. Again, personal opinion. I do find quality information about machines in your videos, but you lose me when you get kicking about speed and faster everything.
@ikew3150 7 күн бұрын
Wow, wow, WOW!!! Lets go!
@johnathanriley188 4 күн бұрын
Im so sad. i just bought a Mars 3. i would have just saved my money cause all of the problems i have with the mars 3 this thing fixes so depressing
@Vertrucio 7 күн бұрын
Something makes me think some of Form's patents expired for things like the tilting bed.
@UncleJessy 7 күн бұрын
My very first resin printer was the Peopoly Moai and it had a tilting bed & prusa has been running the SL1 / SL1S with tilting bed for a handful of years. Excited to see this take off though. Definitely allows those prints to run faster
@DOGbackwardz 7 күн бұрын
I wouldn't recommend a 3" smaller printer with the same functions over $120. Particularly with just a 1x6um difference in pixel size. You lose out on too much print volume.
@wojteklabuc 7 күн бұрын
Depending on what the owner needs - I don't need bigger volume. I'm upgrading diecast car models. Mostly 1:64 and 1:43 scale. Compact printer with great quality small prints with saving hundred euro is a deal which I'm very interested. You can't measure what other people need without knowing other people "metrics" and needs.
@DOGbackwardz 7 күн бұрын
@@wojteklabuc You say it right there, mostly. Even knowing exactly what you're printing, you don't know exactly what you will want to print. What happens when you find the model that speaks so greatly to you that you want to scale up to 1:.32 or 1:.16. What happens when you want to introduce your friends to the hobby? Do you want to run 20 prints or do you want to run 4. If you know the limitations of such a small screen you will never recommend it to someone who doesn't. You also easily make that money back over time due to wear.
@wojteklabuc 7 күн бұрын
@DOGbackwardz I don't print whole models. Only parts. And those even for large scale are small. And I don't need to "what if" because I know what I'm into. I don't buy it to impress friends or to introduce them to my hobby. I have very specific reason to buy 3d printer. And it won't change. Saving money and space is more important than potential for things I would not consider. And from real needs at large scale -details I will print rarely are still very limited in size. Biggest elements are wheels but those are small. And limited to 4-5 (if there is spare one visible). Even at 1:18 scale. And wheels are usually different for different car models. So no point in printing in larger numbers. And most important those prints will always be parts. Not a whole car. And it will never be more than 4 runs. With 1 run with different resin for tyres. Available volume won't affect neither QOL or labour/time in those rare situations when I would work on larger scale models. I'm doing my reaserch for weeks and videos like this cured me from thinking about bigger printers. Instead saved money will serve better if I spend it on small vacum former to make windscreens. My real needs > what I might or not need.
@DOGbackwardz 7 күн бұрын
@@wojteklabuc It's not saved money, it's delayed spending. The more runs the more ppe, the more fep usage, the more screen on time, increased labor time, and increased risk of failure.
@wojteklabuc 7 күн бұрын
@@DOGbackwardz If you know better than me how often and what I will print...
@theromeog 7 күн бұрын
Awwww. It’s a Mini bib. 😂😂😂
@TheGoatPC 6 күн бұрын
Amazing how you're entire review had nothing negative to say on the machine where as other reviews had some negative issues. Clearly some money has exchanged hands here.
@kylewilliams6091 6 күн бұрын
You only just working out how reviews work
@TheGoatPC 5 күн бұрын
@kylewilliams6091 Typically they will tell you it's a paid promotion or not. Uncle Jess here doesn't.
@kylewilliams6091 5 күн бұрын
@@TheGoatPC there is segment on how this video is sponsored by elegoo with a banner across the bottom stating that it’s a elegoo sponsored video ?
@kylewilliams6091 5 күн бұрын
@@TheGoatPC I also just clicked the description and it says in first few lines it’s sponsored by elegoo
@TheGoatPC 5 күн бұрын
@kylewilliams6091 Yes, all of the reviews I've watched of these new machines are sponsored by Elegoo, seeing how they sent the machine. They also typically let you know that money hasn't changed hands, so you're getting an honest review. This isn't a review. It's a fully paid advertisement. I like full transparency.
@peterdocter4659 6 күн бұрын
Great machines,dc on the back logical, wifi on the back logical, BUT WHY ALWAYS THE USB PORT ON THE BACK OR SIDE JUST PUT IT AT THE FRONT !!!! (Yes is know it's on the board there, but damn! how hard is it to design it to have the power switch and usb in the front!!!
@janineharris3601 21 сағат бұрын
do you have to wear a mask using this one
@haukke 7 күн бұрын
I just bought the Mars 4 like 6 weeks ago. I really wish they would tell you when you buy something that a new version is coming really soon and you shouls maybe wait.
@Travis-bg1fj 7 күн бұрын
So if you're using the exhaust port you can only move the lid as far as the exhaust hose? That's absolutely ridiculous and short-sighted.
@UncleJessy 7 күн бұрын
Thats unfortunately how all lift away acrylic hoods work on printers. Some folks have made printable magnetic hose adapters so you can just snap it on it off when needed
@onemansvideos2134 7 күн бұрын
vat dancer?
@AlbertoMartinez765 7 күн бұрын
The Normal one is only $179! ( No Ai Camera and no wifi) for that price its a NO Brainer.
@petercallison5765 7 күн бұрын
No tilt either which is the biggest improvement. I also just noticed the Mars 5 is only 4K. Finally, the Mars 5 is an extra 2 months wait.
@andrewjeremy615 7 күн бұрын
damn ill trade my Saturn 4 for one if anyone has this one haha
@HiroProtagonistak 7 күн бұрын
I don't need a fifth resin printer....
@petercallison5765 7 күн бұрын
For those looking at the cheaper Mars 5 vs the Ultra you need to note the Mars 5 is only 4K. Seems a little deceptive to me as most people will expect them to be the same resolution.
@michaelalanstlouis 7 күн бұрын
Are you sharing an office with a dentist? Sounds like drilling in the background!
@UncleJessy 7 күн бұрын
😂 checkout the end of the video... got a big print running
@DeadgstPersonal 7 күн бұрын
yo 3rd comment on video lets goo
@ItsBrody 7 күн бұрын
Seeing you use the yellow scraper on the Fep was hard to watch 4:37
@dextersamson8286 7 күн бұрын
Everyone does that. Calm down
@ItsBrody 7 күн бұрын
@@dextersamson8286 Not true. People who own 500 printers do.
@Brettoh 7 күн бұрын
Honestly the FEP is a consumable, you’re doing more damage with an overexposed print.
@jasoncombs3232 7 күн бұрын
The printed Elegoo across the drip tray drives me crazy! It shouldn't say elegoo anywhere on it. Not even the edge. I sent a Email and gave them a piece of my mind. They should send new drip trays to everyone who purchased it.
@dextersamson8286 7 күн бұрын
Ok karen
@Brettoh 7 күн бұрын
Why shouldn’t it say Elegoo on an Elegoo product? 😂
@jasoncombs3232 7 күн бұрын
@@Brettoh because it's insanely difficult to clean the resin out of the letters. It should be flat and smooth. Easy to wipe clean.
@BabyJesus66 7 күн бұрын
Fill it with resin and cure it. Then it'll be flat
@sharky2675 6 күн бұрын
jesus christ, stop with the uptalk, its so annoying
@YOURMOTHER-gt6lr 6 күн бұрын
what about metal printers ????
超人夫妇
Рет қаралды 16 МЛН
超人夫妇
Рет қаралды 13 МЛН
Special Effects Funny 44
Рет қаралды 2,4 МЛН