Perfect Photo Engraving ImageWithout Adjustments

No video

Perfect Photo Engraving ImageWithout Adjustments

Рет қаралды 12,766

7 ай бұрын

I see too many people playing with image settings when engraving photos. The reality is that this isn't usually necessary, and instead, all you really need to do is understand your laser a bit better.
In this video, I will show you how I get perfect laser-engraved photos without wasting time with useless image adjustments.
►►►► SOCIAL MEDIA
• Channel Membership ➭ www.youtube.co...
• Instagram ➭ @slicedpidesign
• Facebook ➭ / slicedpidesign
• my business site ➭ www.slicedpi.d...
• my Etsy store ➭ slicedpidesign...
• email ➭ stevemakeseverything@gmail.com (business inquiries)
►►►► SAVE MONEY NOW! (I may earn commissions)
• Get your materials fast with Amazon Prime free for 30 days ➭ amzn.to/3xhXn0Q
FTC Legal Disclaimer - Some links found in this description may be affiliate links, meaning I will make a commission on sales you make through my link. This is at no extra cost to you to use my links/codes; it's just one more way to support me and my channel.
►►►► MY MAKER SPACE
Laser/Vinyl Cutters
SP-3624 90W 36"x24" self designed laser
Full Spectrum Laser Muse 3D
xTool D1 Pro Diode Laser: www.xtool.com/...
xTool M1 Laser/Blade Cutter: www.xtool.com/...
Cricut Maker 3: amzn.to/3s8j7i0
3D Printers
Sliced-Pi ]|[ CoreXY (self-designed)
Sliced-Pi ][ CoreXY (self-designed)
Prusa I3Mk3 with MMU 2
Creality CR-10 (massively upgraded)
Creality Ender 3 V2 amzn.to/3oLz7kc
AnyCubic Photon S SLA Resin Printer amzn.to/3wtSVvo
CNC Router
OneFinity Woodworker. onefinitycnc.com
►►►► SOFTWARE I USE
DaVinci Resolve 18 www.blackmagic...
Autocad Fusion 360 www.autodesk.c...
Inkscape inkscape.org
Kittl kit.tl/print_s...
Gimp gimp.org
#stevemakeseverything #algolaser #laserengraver #laserengraving #laserengravingmachine #laserbusiness #lasercutting #maker #makers #makersgonnamake

Пікірлер: 60

@StuMas 2 ай бұрын

The best settings I've discovered for engraving photos on birch with a ThunderBolt 30W CO2 laser: Speed: 300 Max Power: 30 Min Power: 7 LPI: 254 (2 passes if engraving on thicker plywood)

@SteveMakesEverything 2 ай бұрын

The LPI setting is pretty high for a CO2 laser since the beam is probably 0.2-0.3mms square. This means you are likely overlapping lines by 50% and losing some resolution. Have you tried an LPI of ~128? You can increase the power a bit if you just want the image to be darker It is common to assume that a darker image has better resolution, but it can be tricky.

@claytonkumuhone612 8 күн бұрын

Thank you, Steve. I'm going to try this

@SteveMakesEverything 7 күн бұрын

Let me know how it works out.

@tttuberc 7 ай бұрын

Thanks for the video. I haven't been happy with my photo engraving result. Now your tips help me understand what the problem might me. Thanks so much

@SteveMakesEverything 7 ай бұрын

You're very welcome!

@okin8949 7 ай бұрын

Thanks for the useful input - there is a lot of misunderstandings around when it comes to resolution. I wanted to point out that, depending on the lasers output power and on the material you will have different dot sizes (bigger than your laser point measurements). That is because the material burns away and the burning increases the dot size. So i changed from 254 dpi to around 220 dpi when engraving plywood (just a an example), but you will have to find out whats working on your machine with an intervall test.

@SteveMakesEverything 7 ай бұрын

Yes the spot size of the laser generally doesn’t change for most lasers, but if the power is high, the hole it burns can certainly be bigger. The AlgoLaser Delta poses some interesting challenges because the spot size actually can change as a result of a technical improvement unique to the Delta. Since the spot size can change with power, I really need to talk to them to ask what happens when using grayscale where the power varies constantly.

@AcryliWoodDesigns 7 ай бұрын

What machine are you using to do this?

@mrgrinch61 Ай бұрын

loved this video THANKS

@SteveMakesEverything Ай бұрын

You are so welcome!

@tracywilliams61 7 ай бұрын

Just the info I needed. Thanks

@SteveMakesEverything 7 ай бұрын

Any time! Thanks Tracy.😀

@justinheffernan8304 7 ай бұрын

I love this! Thanks Steve! I've also heard that engraving across the grain (so grain is vertical) helps some too. Obviously this doesn't really apply to MDF but if you're engraving wood it could help. I haven't tried this yet so I'm just going off secondhand information.

@SteveMakesEverything 7 ай бұрын

Engraving on vertical grain provides some improvement but it is minimal in my experience. It’s wood and you just have to live with grain 😁

@norm5785 7 ай бұрын

Wonderful, thank you for sharing. Stay safe,wai, happy and healthy. From Henrico County Virginia

@SteveMakesEverything 7 ай бұрын

I'm it was useful

@boxpopulichannel 6 ай бұрын

best tutorial of all. I watched all 4 channels of "4 brothers", but this channel is superb.

@SteveMakesEverything 6 ай бұрын

Thanks for supporting all of us

@ainttakenanyshit 4 ай бұрын

Your video I watched just before this was using Borax to darken the engraving. The results you can obtain can be summed up in one word - PRACTICE.... One question, does a Borax "treatment" only work on wood? How about metal? No.... Thank you for sharing your expertise for all us newbies....

@SteveMakesEverything 4 ай бұрын

As they say, "Practice makes perfect", though the more knowledge you have going into a problem, the sooner your practice pays off. Sadly, the borax method works only on wood, and typically it works best on softer woods like pine, basswood, etc.

@MileyonDisney 5 ай бұрын

Thanks, Steve. That was some great information!

@SteveMakesEverything 5 ай бұрын

Glad it was helpful!

@TubeDaLube 7 ай бұрын

Thank you,great tip 👍

@SteveMakesEverything 7 ай бұрын

Glad it was helpful!

@rongunter6563 7 ай бұрын

Thank you Steve... That was great!

@SteveMakesEverything 7 ай бұрын

Glad you enjoyed it

@JimmyLee0757 7 ай бұрын

Thanks for this video. It was a great help.

@SteveMakesEverything 7 ай бұрын

Glad it helped!

@chrisgallaher3899 7 ай бұрын

That works fantastic on about 10% of pictures that have correct exposure, but that leaves 90% where you will need to go in and play with contrast and gamma to get even a reasonable engraved image, as you say most people will be happy with these results, it becomes really noticeable that an image needs more work wen you are doing images on materials like tiles and that could be another (very long) video.

@SteveMakesEverything 7 ай бұрын

Yes, bad exposure is bad exposure, but if you get the photo adjusted in a photo tool to look good on your screen, it will look good on your laser too. I wouldn't use Lightburn to adjust this, but rather a photo editing tool and get it right to your own eye first. No process for a laser is going to improve a bad photo. However, for minor improvements, you can do a couple of things. First, to brighten up an engraving, you can either reduce the lines per inch or you can speed up the laser a bit. In the worst case, you can definitely adjust the brightness and contrast.

@chrisgallaher3899 7 ай бұрын

@@SteveMakesEverything I agree 100%

@PaulS-wg8fr 6 ай бұрын

great video thanks for the tips!

@SteveMakesEverything 6 ай бұрын

Glad it was helpful!

@roellymardianto5401 7 ай бұрын

Thank you for this very great tip

@SteveMakesEverything 7 ай бұрын

You are so welcome!

@stephen_LaserLuster 7 ай бұрын

Another great and very educational video.

@SteveMakesEverything 7 ай бұрын

Glad you think so!

@PuppetWood 6 ай бұрын

Thanks for the information.

@SteveMakesEverything 6 ай бұрын

Any time!

@jasonfair5160 7 ай бұрын

great explanation! thanks!

@SteveMakesEverything 7 ай бұрын

You're welcome!

@nlreversespeech 6 ай бұрын

Engraving at 90 degrees to the wood grain gives significantly sharper results

@SteveMakesEverything 6 ай бұрын

This is definitely true, though MDF doesn't have grain, and the plywood piece I used was just a scrap, so I wasn't too concerned about making something production-grade.

@AcryliWoodDesigns 7 ай бұрын

Hi Steve, I'd love to see a video of a thumbnail image on a metal business card using the F1!

@SteveMakesEverything 7 ай бұрын

Great suggestion! I'll add it to my list.

@beavercreekdesign 7 ай бұрын

Thanks Steve!

@SteveMakesEverything 7 ай бұрын

You're welcome

@bradentheman1373 7 ай бұрын

i have a question i have a laser that has a power of 532mm what sort of saftey goggles do i need if you know (its a handheld 303 laser)

@SteveMakesEverything 7 ай бұрын

Is this a high-power laser like an ND-YAG laser? This is a pretty odd wavelength for typical hobby lasers. Unless you have useable glasses with the laser, then shop on Amazon for glasses with an OD 6 rating in a band that covers that wavelength. I did a video on glasses recently, so take a look in the channel video backlog and watch that one to get a bit more information.

@kapa1611 7 ай бұрын

thanks! 👍

@SteveMakesEverything 7 ай бұрын

Hopefully you can put this to good use

@AcryliWoodDesigns 7 ай бұрын

How long did the final result take?

@SteveMakesEverything 7 ай бұрын

It was engraved in 8-10 minutes.

@GrandmawsWorkshop 5 ай бұрын

good recommendations.. just need me a laser now. lol

@SteveMakesEverything 5 ай бұрын

Well if you don't win the Acmer giveaway, you can take a look at the many lasers I have reviewed here😉

@GrandmawsWorkshop 5 ай бұрын

Yea I will

@AcryliWoodDesigns 5 ай бұрын

What laser did you do this project with?

@SteveMakesEverything 5 ай бұрын

This was the Xtool S1. For project videos I tend to use whatever laser is sitting on my workbench, which is a good indication that the specific laser usually doesn’t matter.