Step by Step Hasegawa 1/48 SH-3H Seaking Part 3 (final reveal)

Рет қаралды 38,915

5 жыл бұрын

in the last part of the Step by Step build of Hasegawa 1/48 SH-3H Seaking we put the final details together before the final reveal
please subscribe so as not to miss any future videos

Пікірлер: 112

@AuggyNole 2 жыл бұрын

so cool! I was in an SH squadron... started on H-3's before changing platforms to 60's... the finish looks so authentic...lol like a bird that had been washed recently, wiped down w/ CPC, and then had just a few hours of flight time..lol Never seen models done w/ such detail. very cool

@PerisModels 2 жыл бұрын

Thank you very much

@robertozanoni5186 11 ай бұрын

Complimenti per questo lavoro bellissimo e per il video utile a chi vorrà cimentarsi nella costruzione di un mito come il sea king.

@Mariner311 Жыл бұрын

I was bound for the SH-60B... but in Pensacola - my first jumps out of a helicopter during Rescue Swimmer School where out of an S-3 into Pensacola Bay. Later grabbed some time with HS-6 and HS-8 before they transitioned to the SH-60F . You made a beautiful model... YES, wiped with some CPC (Corrosion Preventative Compound)... kinda WD-40 with coconut oil ?

@jimc5096 Жыл бұрын

I LOVED the Sea King! I was with HC1 DET2 from Feb 74 to Apr 76 onboard the USS Midway (CV-41) when they had SH-3G's. For all the H3 guys, we had Old 66 for a while and it was kind of neat to just touch such a historic bird.

@Scaleymodels 3 жыл бұрын

Great build. I am currently recording a build of the same kit and picked up some great tips. Thanks

@andrewwood3817 Жыл бұрын

Fantastic build. I've had the model on pre order since October from Jadlam. Love the interior you put in its just such a same the side door is moulded to the fuselage rather than a separate item that could be open or closed.

@04swimbeav 5 жыл бұрын

Absolutely amazing work!!!! I have the same kit, only mine will be a high viz scheme, but I haven't decided on a decal scheme yet. Beautiful job on the molting job as well!

@PerisModels 5 жыл бұрын

Thank you 👍🏻

@allgood6760 2 жыл бұрын

Wow!.. nice build....thanks from NZ 👍🙂🇳🇿

@PerisModels 2 жыл бұрын

Thank you 😊

@TheModelGuy 5 жыл бұрын

Looks amazing. I used to live in CFB Shearwater and had the RCAF Seakings overhead all the time...and being towed up the road after force landing.

@PerisModels 5 жыл бұрын

Thank you 👍🏻

@sanderkramer6555 5 жыл бұрын

Awesome build, really like the look of it. 🤗👍🏻

@PerisModels 5 жыл бұрын

Thank you 👍🏻😁

@jacobs_models995 5 жыл бұрын

I've been waiting for this come out now - Great Job!

@PerisModels 5 жыл бұрын

Thank you 👍🏻

@michaellewis1211 5 жыл бұрын

Awesome work, beautiful!!!

@PerisModels 5 жыл бұрын

Thank you 👍🏻

@fidinboca 5 жыл бұрын

Hard to said "Is not the real one". Superb job !!!

@PerisModels 5 жыл бұрын

Cheers buddy 👍🏻 I wouldn't go that far 😁

@garybarter5338 3 жыл бұрын

Stunning work my friend!

@PerisModels 3 жыл бұрын

Thanks

@cygnusx10 5 жыл бұрын

Very nice work - looks amazing.

@PerisModels 5 жыл бұрын

Thanks 😁

@zanothman7623 2 жыл бұрын

Amazing bro 👏👏👏

@SmallSoldier 5 жыл бұрын

Fantastic looking model, Nice!

@PerisModels 5 жыл бұрын

Thanks 😁

@cedricpruvot7713 5 жыл бұрын

Excellent job thanks 👍👍

@Falconeer84 5 жыл бұрын

Amazing build again! You make it look so simple ;-)

@PerisModels 5 жыл бұрын

😁 thank you 👍🏻

@WardisKing-kf3jz Жыл бұрын

Amazing work , looks really good , take care keep modelling :)

@seanerk5kt9 5 жыл бұрын

Awesome work my friend! Although I can’t help to think about what a nightmare it would be to ship!!!

@PerisModels 5 жыл бұрын

I ll have everything crossed I have glue the doors and the rotor blades are removable....I am worried about the wiring on the sides 🥵😱🥵🥵😱

@jamesfrost7465 2 жыл бұрын

That looks so good. Nice. Thank you for telling us what products your using. New subscriber.

@PerisModels 2 жыл бұрын

Welcome my friend

@MAN394631 5 жыл бұрын

Again excellent work from you, this model looks fantastic mate. Thumb up. Cheers

@PerisModels 5 жыл бұрын

Cheers 👍🏻

@Rafsan62 4 жыл бұрын

Very very nice and detailed job... Congratulations

@PerisModels 4 жыл бұрын

Thank you

@laMoort 5 жыл бұрын

gorgeous build mate, beauty. :)

@PerisModels 5 жыл бұрын

Thank you 😁👍🏻

@vladancovic9998 5 жыл бұрын

Extra job my friend.

@PerisModels 5 жыл бұрын

Thank you 👍🏻😁

@fabiosilva3799 5 жыл бұрын

Congratulations ... a true work of art !

@PerisModels 5 жыл бұрын

Thank you 👍🏻

@fabiosilva3799 5 жыл бұрын

I would like to suggest that you make a video explaining all steps of the assembly of the Kinetic 1/48 kit of the Mirage IIIE.

@79county 4 жыл бұрын

that was put together by detail GREAT JOB....

@PerisModels 4 жыл бұрын

Thank you

@79county 4 жыл бұрын

can the side cargo door on the right be modify cut open

@PerisModels 4 жыл бұрын

@@79county you will have to cut it open

@user-du2nt1mi5r 4 жыл бұрын

Great job, great result, beautiful helicopter.

@PerisModels 4 жыл бұрын

Thank you 😁

@antoniomorren9755 5 жыл бұрын

!!! FAN - TAS - TIC !!!. 👌👌👌👏👏👏.

@PerisModels 5 жыл бұрын

Cheers 😁😁😁

@MrBorzorg 5 жыл бұрын

Great Peri.👌👌👌👌

@PerisModels 5 жыл бұрын

Thank Nino 😁

@user-rs2kk4em8o 5 жыл бұрын

好牛👍👍以后要多出这样的视频教程啊

@PerisModels 5 жыл бұрын

👍🏻

@strikeeaglemodels1588 5 жыл бұрын

Looks first class buddy 😍

@PerisModels 5 жыл бұрын

Cheers 👍🏻😁

@lehagusev583 5 жыл бұрын

Потрясно! Хоть я и "танкист" но круто!!!

@PerisModels 5 жыл бұрын

Thank you 👍🏻

@lesthiele4921 5 жыл бұрын

Hi Peri, you have completed another master piece, very well done. What do you thin your Mr Hobby paints with? Again thanks for sharing a great build.

@PerisModels 5 жыл бұрын

Thank you Levelling thinners 400

@Eferaton 5 жыл бұрын

Excelent Job and the interior looks Great, i’ve got a question about the gloss coat of Tamiya ,what thinner do yo use for and ratio? Thanks keep doing masterpieces

@PerisModels 5 жыл бұрын

Thank you I am using 400 leveling thinners About 40 60 gloss thinners

@Eferaton 5 жыл бұрын

Peri's Models thanks a lot i’ll try ASAP best regards

@user-fh3mb3hx9pscorpios 5 жыл бұрын

Όπως πάντα καταπληκτικος.

@PerisModels 5 жыл бұрын

Σε ευχαριστώ 👍🏻

@c4tze 5 жыл бұрын

id love to see you build a full combat ready nh90 but i dont know if there are any nh90 models in existence that are also in a combat configuration and in a decent size an detail level ...

@PerisModels 5 жыл бұрын

Very interesting thought 🤔🤔🤔

@taylorrandolph7561 5 жыл бұрын

just awsome

@PerisModels 5 жыл бұрын

Thank you 😁

@taylorrandolph7561 5 жыл бұрын

np i dont have as mutch tools so i think thats why mh PBY 5a-catalina is horrible

@cedrictrottet3272 5 жыл бұрын

Hi Péri. What a nice work !! I have a question. How many time between panelining and cleaning? Do you use a damp paper or bud with thinner?

@PerisModels 5 жыл бұрын

Until it looks dry I start with dry paper and if need it I add a bit of thinner

@cedrictrottet3272 5 жыл бұрын

Thank you for your answer. Bests Regards .

@tomphillips7858 5 жыл бұрын

Great stuff. Quick question, why didn’t you paint the safety marking blades top and tips for main rotor and tail rotors?

@PerisModels 5 жыл бұрын

Thanks Tom It wasnt in the instructions and i didnt see on some photos Not all birds have it

@tomphillips7858 5 жыл бұрын

Peri's Models I was a crewman in USN UH-3H Sea Kings in the early 90’s before transitioning to UH-60F’s SeaHawks. Most of “my” aircraft were painted in the older white over grey higher visibility paint schemes we used throughout the 70’s and 80’s. The few low vis birds I recall had a lighter color (sea grey?) on the blade tops, with white tip, so aircraft above could easily see the rotor arc. Also, I’m providing an image from wiki of the greenhouse (upper canopy) in a green plexiglass. Don’t recall ever seeing blue “greenhouse’ plexi on USN aircraft, though the Japanese Maritime SDF had blue, and it looked pretty cool, imho. Maybe that was a later iteration for the USN, after my time. By the time I got out in 1996/1997 most of the USN had transitioned to the H-60 airframes. Reservists and the occasional airfield rescue birds might still fly the Beast, but they were few and far between at that point. I’m really not trying to be critical, and I enjoyed watching your airbrush process. Learned a lot, and enjoyed “visiting” an old friend. Hopefully I’m not annoying you here, just thought you;d be interested. As a modeler I enjoy learning the known details of folks who were there. If not, I understand and apologize. Not my intention to annoy. Anyway, here’s a link to a pretty good pic of a bird from around the time I got out. Hard to see the blade tops, but you can see the lighter color, and the blade tips are white. I’d also guess the tail rotor has white tips as well, purely for deck safety of folks working around the aircraft while taxiing, takeoff/landing, and critical deck safety maintainance/testing. Great example of the panel lines and wear I feel you did a great job representing. So, Bravo Zulu there. commons.m.wikimedia.org/wiki/File:Sikorsky_UH-3H_Sea_King_of_VC-8_hovers_off_Naval_Station_Roosevelt_Roads_on_17_March_1997_(970317-N-8977R-006).jpg

@tomphillips7858 5 жыл бұрын

Whoops, wrong link. Here’s the one I was referring to. Lots of good H-3 pics from the early 90’s. HCS-2 Desert Storm well represented. And a good collection of greenhouse colors... I stand corrected (kind of). www.seaforces.org/usnair/HC/Helicopter-Combat-Support-Squadron-2.htm

@PerisModels 5 жыл бұрын

@@tomphillips7858 thank you my frined I wish I had this link earlier 🥵 I just followed the instructions...... I will use in the next one 👍🏻👍🏻👍🏻

@matthewmcgee 5 жыл бұрын

Just a data point, but the UH-3Hs I flew at PMRF (all former SH-3Hs painted white over gray) didn't have colored rotor tips. The main rotors and tail rotors where just grey. There are also many vintage photos showing white over gray SH-3s (actual aircraft, not models or CG) with yellow tips on the main rotors and red/white/red on the tail rotor tips. Most low-viz gray painted USN H-3s just had gray blades, though if you look hard, you can occasionally find a photo with a red/white/red tail rotor tip. (Sometimes just a single colored blade with four gray ones!) I never saw a blue plexigass greenhouse on a USN Sea King.

@gianluigimarino8264 4 жыл бұрын

BEST

@PerisModels 4 жыл бұрын

Thank you

@emmanuelcassan3616 4 жыл бұрын

Hello great job but no informations about the door, rotors and weaspons. By.

@PerisModels 4 жыл бұрын

What information do you need my friend?

@dickiedick100 4 жыл бұрын

Verry nice build. I can't make it this way. So respect for the beautifull work. But one thing I see within almost every scale builder: They weather the model and put then the decals. As if they don't be scratched in real life. Our am I thinking the wrong way? With kind regards,

@PerisModels 4 жыл бұрын

Thank you Usually I put decals before weathering

@mariencaldas4247 5 жыл бұрын

top top top

@PerisModels 5 жыл бұрын

😁👍🏻

@elinquisidor6863 8 ай бұрын

Great😂

@jimwatson842 5 жыл бұрын

One is easily visible in the photo.

@PerisModels 5 жыл бұрын

It is but I was working with the kit decals

@luizaugustodasilvajunior6159 5 жыл бұрын

Showwww

@PerisModels 5 жыл бұрын

Thank you 👍🏻

@lesliereinier4790 4 жыл бұрын

I served in this squadron. I turned a wrench in the real bird.

@PerisModels 4 жыл бұрын

Respect 👍

@jimwatson842 5 жыл бұрын

No “stars and bars” anywhere? Always thought that was international law.

@PerisModels 5 жыл бұрын

It is low visibility so you have to look closer to the model to see them

@TheEdgeboi 5 жыл бұрын

Do an RAAF jet!

@PerisModels 5 жыл бұрын

I am working in a couple of commissions at the moment Maybe in the future

@piloto5248 4 жыл бұрын

HEY................nothing to said.......i have no A B C D JUST........GREAT JOB,

@PerisModels 4 жыл бұрын

👍👍👍

@paulrob86 5 жыл бұрын

Fantastic job, just one point showing it on a white background is not the best

@PerisModels 5 жыл бұрын

Thank you 😁

@petemelanyevans9162 3 жыл бұрын

A very nice job though the pre shade , marble effects was a waste of time .you over painted it all out ....a great shame .it would have looked so much better .

@PerisModels 3 жыл бұрын

It's very subtle and you can clearly see the difference in real life