Рет қаралды 415
Peristaltic hose pump Hose pump pressure adjustment demonstration of Huayun Z-type
The video fully demonstrated the operation method for adjusting the pressure value of Z-type pump in Huayun mechanical hose pump series. The specific operation steps are as follows:
First remove the metal hollow cover on the side of the hose pump.Then remove the front transparent round cover bolts
.Hand reach in from the side tap and take out the ransparent round cover.Remove the screws of the rotor guard plate.Take out the guard plate.Loosen the bolts of the right roller support arm.According to actual needs shrink the roller support arm inward or extend the roller support arm outward,and tighten the bolts after adjustment start the otor let the hose pump rotor rotate 180 degrees,and then adjust the pressure value on the other side according to the above steps.After the pressure defaults are adjusted in place install the rotor guard plate and tighten the bolts put the transparent round cover back on the pump cover and tighten the bolts.Install the side metal hollow cover and tighten the screws.
timeline:
00:00
Remove the metal hollow cover on the side of the hose pump , take out the transparent round cover and take out the guard plate
00:10
Loosen the bolts of the right roller support arm
00:20
According to actual needs shrink the roller support arm inward or extend the roller support arm outward
00:30
start the motor let the hose pump rotor rotate 180 degrees
00:40
adjust the pressure value on the other
00:50
install the rotor guard plate and tighten the bolts
If you want to find videos related to Huayun brand and peristaltic hose pump. For more information visit: www.hospump.com
1、Peristaltic Hose Pump Special pump for industrial pumps|Huayun hose pump 3d animation • Video
2、Peristaltic Hose Pumps working|Industrial squeeze hose pumps conveying kelp experiment video • Peristaltic Hose Pumps...
#pump#peristalticpump#hosepump