No video
Perkins Diesel Engine Build Pt 3 Cylinder Head Install
Рет қаралды 64,333
6 жыл бұрынPart 3 of the build series! It's head gasket install time! Let me show you how. Click SHOW MORE for links, prices and more info on the types of tools used in this video↓
Tough little impact gun used → amzn.to/2lxdaWg
Engine stand → amzn.to/2lxyhIo
Snap Ring pliers → amzn.to/2Nel82I
Plastigauge → amzn.to/2LKQFsp
Torque Wrench → amzn.to/2KO02GF
Download a Perkins Engine Manual FREE → www.kdtrading....
Facebook → briansmobile1
Instagram → briansmobile1
Twitter → briansmobile1
Pull-a-Part Challenge video 3 → • The Pull-A-Part Challe...
Disclaimer:
Training and discretion is recommended before attempting anything portrayed in this video.
Due to factors beyond the control of briansmobile1, briansmobile1 assumes no liability for injury or property damage incurred as a result of the presentation of this information contained in this here video or any of the other briansmobile1 videos.
briansmobile1 recommends safe practices including the use of personal protective equipment such as eye protection, hearing protection, gloves, guards, shields, and reputable gear when paramotoring.
I am an Amazon affiliate, Prime member, and general Amazon nut. I provide links to help you find the right stuff for the job quickly, confidently, and conveniently.
Thanks for watching my videos. I hope they've helped you tackle something you thought was a challenge and left you feeling like a FORCE for win! And if nothing else, perhaps you had a laugh and were entertained!
@bobgwinn5091 6 жыл бұрын
cool
@briansmobile1 6 жыл бұрын
Bob, you're a mover and a shaker! That's cool.
@anthonythompson69 6 ай бұрын
With a bigger bearing clearance and the right oil, these engines could last "forever"!😊
@bfields1448 6 ай бұрын
Perkins engines are little jewels.
@airbornelocksmith 6 жыл бұрын
Brian when we work on Roter systems on helicopters we number the bolts so you can just count and go in stead of having to look at the picture all the time. So next time try that with a marker will make it much faster.
@davidd6737 6 жыл бұрын
literally thousansds of peiceses tearing an engine like this down, alot of work, plus the knowledge and skill set mechanics have to know, its a hard industry, much respect
@dakotaintercontinental4558 3 жыл бұрын
Hello Brian, Thanks for the series on the Perkins. I have a 50hp in my 43' sailing home and your videos have made a huge difference in my confidence. I live north of you, 100 miles, but by next year will be full time on the 43'. I have 4 daughters and your comments regarding daughters is spot on!! Thank you again and hope to see your finished "man cave" before moving to salt full time. 2020 now and looking forward to 2022.
@torifan1976 6 жыл бұрын
Been watching your channel for years, and I have to say your editing, and production skills have come a long way. Great series Brian, love it.
@briansmobile1 6 жыл бұрын
Thanks Ben- that's really cool of you to say that!
@TheSoupdragon1968 5 жыл бұрын
Enjoying your series on the Perkins engine. We had Chrysler Europe vans at work , they had Perkins phaser 6 cylinder engines... Amazing things super smooth and powerful, for a diesel.
@DrFiero 6 жыл бұрын
For those crazy tight bolts, stand on the engine stand. Saves the engine twisting around on you. Can't tell if you're doing it or not...more for any newbie wrenchers out there.
@briansmobile1 6 жыл бұрын
Or just stand through it.
@babykilla1231 5 жыл бұрын
TECHNICALLY you’re supposed to do that extra 180 degree turn on the head bolts all in one sweep (good luck with that 😉) nice video, I work at a Perkins dealership, we have 4 of these engines in the shop right now in various stages of re-building.
@AntonioClaudioMichael 6 жыл бұрын
Definitely heard the compression building
@piotrciach1126 6 жыл бұрын
You can also divide 180 degrees into 3 stages of 60 degrees. This allows for greater intuition and control. :) it's COOL
@whatnextsunshine3046 6 жыл бұрын
Like your poise... even me starts to understand something bout auto repairs ;-))
@aussiebloke609 6 жыл бұрын
Re: the head gasket - an oval is basically an ellipse. That shape in the gasket is correctly called a _stadium,_ as it has straight, parallel sides (although in common speech, they terms are often used interchangeably.) :-) And yes, I can be a bit of a pedant - but _you_ asked! :-D
@briansmobile1 6 жыл бұрын
cool
@wyattoneable 6 жыл бұрын
That head gasket could be easily reversed, you provided a good tip for correct installation. Your editing was spot on which makes viewing flow nicely. See you on the next video.
@briansmobile1 6 жыл бұрын
OMG! Thanks Wyatt!
@macro820 6 жыл бұрын
I agree with others about the stretched bolts. Sometimes they have different specs for re-used bolts I believe
@coldblazinfire 5 жыл бұрын
I have a 1992 Bobcat 943 with the 4.236 Perkins engine and the Bobcat repair manual says that there are dowel pins that go between the block and head. I do not see any place where there is countersunk holes in the head or block for dowel pins. I appreciate your video it gives us the answer about the dowel pins. Thank You, excellent videos on the Perkins engine.
@AntonioClaudioMichael 6 жыл бұрын
Great video
@briansmobile1 6 жыл бұрын
You're the man Antonio! Thanks for your support!
@kiiiisu 6 жыл бұрын
cool, but u should put oil on washer part on head stud too! edit: lol i was too quick, good job
@mrb1864 6 жыл бұрын
I let my heads sit overnight to settle and final torque next day, you should be able get the extra 10-20deg you running short . You want get a digital wremch with angular function, man it makes life easy plus see the ft/lb readings from the angular setting and can see how even they go down . These perkins lumps are cool 4 pots .
@briansmobile1 6 жыл бұрын
I'll have to try that.
@Garry.the.courier 6 жыл бұрын
tight nuts .. takes me right back to my youth!
@AP9311 6 жыл бұрын
Cool video!! Cool torque job. Hope you keep cool lol!
@Stoparts 2 жыл бұрын
Nice work man 👏
@SPLEclipse 6 жыл бұрын
The first time you torque by feel and break one of those bolts off it changes the way you do things for life, lol.
@Jengoboys603 3 жыл бұрын
I dunno i just did one by the book and it just popped a gasket 88ftlbs seems low to hold diesel compression. Told my guy i should of milwaukeed the thing on
@tamar5261 3 ай бұрын
My 3 cylinder Perkins wrecked itself when the injector thing in the head fell out and wrecked number 3 piston, con rod and cylinder. I bought a replacement engine and now a year later I think the head gasket has blown 😮
@lodollar23 Жыл бұрын
I hope you got a perkins on that glider lol.
@johnferguson7235 6 жыл бұрын
The torque spec was probably for a DRY torque but you oiled the bolts. The wet torque is different. That's why you couldn't do the 180°for the final stretch of the bolts.
@esmailalfahim2068 6 жыл бұрын
Thanks for the great job
@klc317 6 жыл бұрын
Geez taking those bolts around the 180 looks nerve wracking. Was hoping not the hear a "snap"!
@willhikearizona 6 жыл бұрын
Looks like a good workout. Also what did I miss, with all the comments about "cool"?
@SeanBZA 6 жыл бұрын
Did you measure the head bolt lengths to make sure they were still within spec before reusing them? They do stretch a lot in use, IIRC the spec on some is 2mm, past that you replace all with new, even if some are not past the spec. The old bolts however have a lot of uses on less critical parts, I reused a lot of head bolts to hold trailers together, they were a lot better than the original non rated ones that were there, even though I did have to paint them before and after installing so they would not rust. even welded one head to a plate to make a spare wheel mounting for the trailer that did not have one, and drilled the end for a split pin to hold the nut in place. Later on I changed it out for a tank lid bolt and wing nut, I got for free, because that was stainless steel and looked shiny.
@briansmobile1 6 жыл бұрын
Cool. Stainless tank lid bolts and wing nuts are the coolest!
@TROllingNINJA2031 6 жыл бұрын
that was so nerve racking watching you use that breaker to tighten those head bolts, i know its to spec but i've had my fair share of stripped threads and snapped bolts and just feel the pain of other when it happens to them Dx
@ryanhester5269 6 жыл бұрын
Cool
@abdallasakor894 6 жыл бұрын
All love from Syria
@embededfabrication4482 14 күн бұрын
Hes using what they call the non retorque method. How do you know you can do it with that gasket?
@jasonbubley9427 6 жыл бұрын
Do you use oil in the bearings typically when using the plastigauge?
@nugenki 6 жыл бұрын
The skeletons distracted me!
@spankey0069 6 жыл бұрын
I like it too ;)
@briansmobile1 6 жыл бұрын
Yeah!
@strongmonty 5 жыл бұрын
LOVE YOUR SERIES!!! You've been a big help. Our connecting rod caps had all of their two letter codes (either "CA" or "BX") facing FWD and our lower end had not been opened up since it left the factory in the UK. I'm wondering if someone switched that one that was as you stated "concerning" in the last "rushed" rebuild. That said, had I been you, I probably would have put it back in the way it came out as well. Now that you have this info though, would you think it better to put it back in the way it came out or, do it the way that ours was?...my thought is a call to Perkins but I don't think that would get anywhere.
@smms1276 6 жыл бұрын
COOL 👍
@ozzstars_cars 6 жыл бұрын
Nothing like a police decoy to slow traffic down.
@dennisreelie1720 5 жыл бұрын
Ozzstar with a hitler stache too boot
@alyssac1431 6 жыл бұрын
How do you get the correct torques without the smart arms and machines they use in factory?
@FishFind3000 6 жыл бұрын
4:40 why do those two center red outlines holes on the high side have no passages under them?
@stevemazzarella9259 6 жыл бұрын
I use a 3/4 ratchet
@briansmobile1 6 жыл бұрын
Cool man, cool.
@mostafaali6321 5 жыл бұрын
hello all. can you wright the masure of torqe killo gram the crank chafet and syleder hed torq for berkins engine four piston . thanks
@nikolanikic3494 2 жыл бұрын
Hello, what is the name of the tape with which you measure the clearance of the bearings on the crankshaft ..
@anthonymelchionno109 2 жыл бұрын
where did you install the thrush washers on the main caps
@greasyhandsauto-shaunbutte9726 6 жыл бұрын
Good thing you can put up 300 pounds!
@imnotahealthandsafetyperso4889 4 жыл бұрын
The manual is for the phaser engine not the 4.236
@beep_beep_beep 6 жыл бұрын
You cleaned the head gasket surfaces then touched everything with your oil covered gloves.
@hopsgarage5513 6 жыл бұрын
Nifty
@VivoVivo-pz9ip 5 жыл бұрын
How to settings the val
@user-pd4hr6hy5l 3 жыл бұрын
جيد جدا🙏
@whatnextsunshine3046 6 жыл бұрын
Haahha...like the beginning...tear it down..build the new...lol
@user-pd4hr6hy5l 3 жыл бұрын
هاي
@whatnextsunshine3046 6 жыл бұрын
:-)
@jagannathchowdhurydpgiti3194 6 жыл бұрын
Cool
@jacksonsinflatablechannel 6 жыл бұрын
cool
@tjf1531 6 жыл бұрын
Cool
@oxulucozcan4923 6 жыл бұрын
Cool
Jim's Automotive Machine Shop, Inc.
Рет қаралды 539 М.
Jim's Automotive Machine Shop, Inc.
Рет қаралды 515 М.
Railworld Wildlife Haven
Рет қаралды 103 М.
Pete's Garage
Рет қаралды 2,5 МЛН
The Tractor Whisperer
Рет қаралды 30 М.