In this video I show you how to replace both Nintendo Switch Joycon locks with metal ones. Enjoy!!
Пікірлер: 28
@sarahnorris91626 ай бұрын
Thanks for this video! Happened to me on a pair of joy cons less than a year old! Was actually a pretty easy process and your instructions were very clear and easy to follow :)
@WeRepair6 ай бұрын
Glad to have been of service
@herleyaw4 жыл бұрын
Great vid, had the same issue with my joy-con and fixed it in less than 10 mins with this video.
@WeRepair4 жыл бұрын
Glad it helped
@zetacod3 Жыл бұрын
Love them. Did both min in under 15 min amazing stuff.
@WeRepair Жыл бұрын
Brilliant, glad you fixed it 😁
@OrlandoNabby Жыл бұрын
Thank you for this video! Very straight forward and easy to follow. A friend gave me their switch and the lock on one of the joy cons was shot. This made the repair super simple. Where did you get that awesome repair "mat"? That looks super helpful.
@WeRepair Жыл бұрын
Amazon, will see if I can find you a link.
@jennyyy5054 жыл бұрын
Had 2 pairs of joycons start to do this with me! Ill have to do this for myself so I dont have to keep replacing my controllers!
@WeRepair4 жыл бұрын
Glad I could help :)
@foiredede11 ай бұрын
Absolute life saver, I'd have busted the tiny ribbon cables if not for this video.
@WeRepair11 ай бұрын
Welcome 😁
@hosizoraful2 жыл бұрын
This is a very clear video. Thank you very much!
@LazerWulf8 ай бұрын
I did this to my joycons a few years ago. One thing I remember is that the latches for the Left and Right joycons are mirrored, so you absolutely don't want to get them mixed up. I didn't notice you checking the polarity, if you will, of the metal latches before putting them back in the joycon. I'm not sure if you noticed any differences after the repair, or if you just got lucky.
@user-pk8jz4gz7p7 ай бұрын
what are the differences? i just did this today and the latches work but dont go in before
@LazerWulf7 ай бұрын
@@user-pk8jz4gz7pthe slopes are mirrored. If you did the replacement and its not latching, you got them backwards. I don't really have a good way to indicate which one goes with which. You just have to pay attention to how the slope would latch onto the rail.
@michaellewis74093 жыл бұрын
This will prevent weathering of the lock too, right? I saw some concerns about weathering the rack on the switch itself too, have you had any problems with that? Also where can I find the locks you bought?
@WeRepair3 жыл бұрын
I purchased them from Amazon and not had any issues been using it for nearly a year on a regular basis.
@OnGod10073 жыл бұрын
I switched to metal and it's worse it seemed the spring went deeper into the lock. Could it just be worn out springs??
@WeRepair3 жыл бұрын
I didn't have that issue on mine, might be the notch in the metal bit is deeper causing the issue.
@MarioGamer2.065710 ай бұрын
I managed to do this but the staple is hard to get out , took me 2 mins to get it out and afraid I would break it and my joycons aren't loose and I can play in handheld mode now.
@WeRepair8 ай бұрын
Glad to hear that 🤠
@Ragdollcatman0014 жыл бұрын
How hard wearing are these metal ones? I'm sending my left Joy-Con off for repair (as I have rolling insurance on my Switch) but wouldn't mind, if I ever cancel it, replacing the buckles with these metal ones. The product being described as "alloy" doesn't say much.
@WeRepair4 жыл бұрын
I have had them installed in my switch for over a year with no issues. I'm at 600 hours of game play on Zelda alone so your pretty safe.
@Ragdollcatman0014 жыл бұрын
@@WeRepair Good to know. Just worries me when they're described merely as alloy as that can be chinesium upwards.
@Skeletthuhn Жыл бұрын
HELP! My right joy con is doing fine but my left one is now stuck in my switch! I can remove it while its on but I dont have any solution for this problem :(
@ewanplays7842 Жыл бұрын
fucking pinged the springs and they got lost another 2-4 day wait for me!