P14/27. Timing Chain. How to Assemble Toyota Camry 2.4 VVT-i engine: Timing Chain

Рет қаралды 199,680

3 жыл бұрын

Next video: • P15/27. Crankshaft Gas...
First video: • P1/27. CLEAN the ENGIN...
Cadena de distribución P14. Cómo ensamblar el motor Toyota Camry 2.4 VVT-i: Cadena de distribución
Timing Chain P14. How to Assemble Toyota Camry 2.4 VVT-i engine: Timing Chain
Engine type: 2AZ-FE 2.4 and Toyota Camry 2004
Disclaimer:
These videos are intended to offer general information working a car and tools.
The Peter Finn have used best effort in creating the video. No liability can be accepted by the author and publisher for any expense, damage or injury caused by any errors in the information given. In no event shall author be liable for any direct, indirect damages or loss of profit by you or any third party.
Due to factors beyond the control, I cannot guarantee against improper use or unauthorized modifications of this information. Peter Finn assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. I recommend safe practices when working on vehicles and or with tools seen or implied in this video. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Peter Finn.
Work carefully and safely. Also avoid accidents.

Пікірлер: 95

@vongsakra253919 Жыл бұрын

I remember I have part of you when coming to car. I watched your videos since day one.

@PeterFinnTheCarDoctor Жыл бұрын

Great ! 😀

@mohammadtaqi1396 2 жыл бұрын

Good job man all need it to put the chain on is to first put the chain on exhaust spracket then the intake and it will be perfectly in its place.

@PeterFinnTheCarDoctor 2 жыл бұрын

👍

@nerdbiscuit 2 жыл бұрын

Thank you very much for sharing. Much appreciated

@PeterFinnTheCarDoctor 2 жыл бұрын

You are very welcome

@ditr257 3 жыл бұрын

Excellent, and very accurate job Peter! Please rotate the crankshaft or flywheel to make sure that everything is good!

@PeterFinnTheCarDoctor 3 жыл бұрын

Thanks, will do!

@jourdainminawa6005 5 ай бұрын

😂

@saulc5280 2 жыл бұрын

Fantastic job on explaining the step by step process. I appreciate the information. Thank you!

@PeterFinnTheCarDoctor 2 жыл бұрын

You're very welcome!

@user-df3gq8bq9q 11 ай бұрын

Thanks for your good work

@PeterFinnTheCarDoctor 11 ай бұрын

It's my pleasure

@JuanDiaz-vm1pv Жыл бұрын

Great job. Thank you so much!

@PeterFinnTheCarDoctor Жыл бұрын

👍

@usace69 2 жыл бұрын

Thank you for helpful information

@PeterFinnTheCarDoctor 2 жыл бұрын

My pleasure

@Dmnlndr 3 жыл бұрын

Thank you my friend it really helped me alot

@PeterFinnTheCarDoctor 3 жыл бұрын

You're welcome!

@ecurbyhprum1043 2 жыл бұрын

Excellent tutorial

@PeterFinnTheCarDoctor 2 жыл бұрын

Thank you! Cheers!

@harrybean2129 Жыл бұрын

Great job 👍

@PeterFinnTheCarDoctor Жыл бұрын

Thank you! Cheers! 👍

@coulibalysouleymane9656 2 жыл бұрын

Merci infiniment pour votre soutien merci beaucoup

@PeterFinnTheCarDoctor 2 жыл бұрын

You're welcome 👍

@doubledgolfcarts4810 2 жыл бұрын

thank you!

@PeterFinnTheCarDoctor 2 жыл бұрын

You're welcome!

@mohammednaushad4356 Жыл бұрын

It was a great help

@PeterFinnTheCarDoctor Жыл бұрын

Great 👍

@user-nm5xy5li1n 3 жыл бұрын

Thank you

@PeterFinnTheCarDoctor 3 жыл бұрын

Welcome!

@luismelendez1761 10 ай бұрын

Excellent video Thanks and God Bless you.

@PeterFinnTheCarDoctor 10 ай бұрын

Thanks, you too!

@user-df3gq8bq9q 11 ай бұрын

Good job

@PeterFinnTheCarDoctor 11 ай бұрын

Thanks

@josefranciscoesquertalaman3827 3 жыл бұрын

Peter Finn, excelente video *Like !!!* saludos desde Sonora México 👍

@PeterFinnTheCarDoctor 3 жыл бұрын

👍

@consentidocomunwithcommons7698 2 жыл бұрын

You are the best Teacher you are awesomely definitely suscribe ++++////those Toyota engine are made in perfection reliable for Few decades without any maintenance are very good engine. I’m a BMW tech and Toyota Too for more than 20 years driving both brand and working with them are the best engine “”” Now im with Tesla Technology I owned a Tesla S and now in the learning processes month by month are really simple really like plug and play all the rest is just software input “””” Awesome video “”””” great video “” I have plenty Trust in follow your instructions are great “

@PeterFinnTheCarDoctor 2 жыл бұрын

Thank you! Cheers!😀

@zane8004 Жыл бұрын

Should the Guide tensioner wiggle when install to 20 NM tighten?

@PeterFinnTheCarDoctor 11 ай бұрын

Thanks for comment 👍

@javierantoniomorro9956 2 жыл бұрын

👍👍👍

@PeterFinnTheCarDoctor 2 жыл бұрын

Thank you! Cheers! 😀

@fernandohood5542 2 жыл бұрын

The bottom dot on the crank should between the orange tag or aligned to the bottom of the tag?

@sosscarz Жыл бұрын

yes it should.

@PeterFinnTheCarDoctor Ай бұрын

Thanks for comment, 😀👍

@mike75479 2 ай бұрын

How to turn the crankshaft I’m installing the chain right now, I don’t remember if you mentioned but in this video is not showing

@PeterFinnTheCarDoctor 2 ай бұрын

Clock wice

@elias8073 Жыл бұрын

Woooh I always like you you are my sunshine thanks to you

@PeterFinnTheCarDoctor Жыл бұрын

Wow, thank you

@mosesbenedict8218 Ай бұрын

After coupling there's sometimes a vibrating noise down the engine, can you do a quick video about that thanks.

@PeterFinnTheCarDoctor Ай бұрын

Good call!

@Peter-pv8xx Жыл бұрын

They're called woodruff keys that are in the crankshaft.

@PeterFinnTheCarDoctor Жыл бұрын

Thanks 👍

@autocare3116 2 жыл бұрын

Is good 👍👍👍

@PeterFinnTheCarDoctor 2 жыл бұрын

Thank You Sir 👍😀

@ibrahimswarray3987 2 жыл бұрын

@@PeterFinnTheCarDoctor fine for us in sierra leone thank you doctor

@guabacot1691 2 жыл бұрын

Hai from Indonesia

@PeterFinnTheCarDoctor 10 ай бұрын

Thanks 👍😃

@alamshah1159 2 жыл бұрын

Good info bro.. even I'm not mecanic.. Im use toyota wish 2.0... 260k km. Until now I never change the t chain.. how many km need to change... Tq bro

@PeterFinnTheCarDoctor 9 ай бұрын

About 400 k km

@fluke1172 3 ай бұрын

Has anyone ever tried m12x1.75, grade 12 bolts on a 2003 Toyota camry ?

@PeterFinnTheCarDoctor 3 ай бұрын

Good comment 👍

@mosesandrews4381 2 жыл бұрын

hi Peter, I'm having the hard time doing the timing on my scion tc, because the car is a coup I have to take the whole engine out every time. my cam gear seem to be coming out of time or slipping while under the chain before the chain finally gets to be tight enough to turn the gear with out more slipping. please help.

@danielmartinez1911 2 жыл бұрын

Did u resolved your problem? Do I have to remove the oil pan. Im doing the timing chain on a Scion TC as well. Thx

@mosesandrews4381 2 жыл бұрын

@@danielmartinez1911 you have to remove oil pan yes, I never got it fix

@danielmartinez1911 2 жыл бұрын

@@mosesandrews4381 so I took off the pan, and all bad .. big chunks of metal in there, and the bottom of the block by the oil pan has a cracked piece on it. Think this engines done

@PeterFinnTheCarDoctor 4 ай бұрын

Thanks for comment 👍😀

@Peter-pv8xx Жыл бұрын

Is this an interference engine?

@PeterFinnTheCarDoctor Жыл бұрын

Yes

@forthepeople8218 2 жыл бұрын

Where did u set tdc? I’m confused

@PeterFinnTheCarDoctor 2 жыл бұрын

Look markings

@michaelopere5424 2 жыл бұрын

ForThepeople Tdc is easy to set. All you need is to set the linear marking on the crankshaft position upwards.

@seanedwards94 2 жыл бұрын

@@michaelopere5424 @7:16 I'm confused on how he turned the flywheel. If the engine is still installed how would you turn the crankshaft to get the markings facing up

@billclinton6040 2 жыл бұрын

@@seanedwards94 Just install the crankshaft bolt and use it to turn the crank.

@papybiancokiangalakibangu5572 2 ай бұрын

Langue française interprétée

@PeterFinnTheCarDoctor 2 ай бұрын

Thanks for comment 👍😀

@pov2617 Жыл бұрын

@PeterFinnTheCarDoctor Жыл бұрын

Noted 👍

@YourName-vh1nu Жыл бұрын

On 4:52 you only had issues because you installed the guide to soon you should've waited

@PeterFinnTheCarDoctor Жыл бұрын

Noted

@YourName-vh1nu Жыл бұрын

@@PeterFinnTheCarDoctor I watch alot of your videos and I respect you highly, have a great day

@saiduabdullahi3871 Жыл бұрын

Saidu

@PeterFinnTheCarDoctor Жыл бұрын

Noted and good info !

@Z-Ack Ай бұрын

But did you lock or unlock the vvti gear? When installing new gear it says to unlock and tighten but also says to lock then tighten but says to make sure it is full retarded or advanced. I dunno how to interpret the shop manual there..

@PeterFinnTheCarDoctor Ай бұрын

Thanks for comment 👍

@Hudoba4 2 жыл бұрын

Lets hope you’re not a flag tech

@PeterFinnTheCarDoctor 2 жыл бұрын

👍

@yongxiong8568 2 жыл бұрын

You dont no notthing too slow

@PeterFinnTheCarDoctor 2 жыл бұрын

👍

@michaelopere5424 2 жыл бұрын

Yong Xiong Your insults will take you nowhere .Dr Peter Finn the car Doctor has enabled me to learn alot of things about Toyota engines that i hardly knew about.His enlightening,inspiring,and educative videos have also given me the courage to rebuild my water ceased Toyota 2AZ FE engine.

@Wedoitalltohelp 8 ай бұрын

Terrible

@PeterFinnTheCarDoctor 8 ай бұрын

Noted 👍

@Z-Ack Ай бұрын

Ha. His name is we do it all to help.. but he’s an angry old asshole.. “terrible”. Sir you can say that about your wives cooking and her weight gains but lay off the guy actually doing stuff to help others.. .. and go sit on a thorn bush prick..