DJI RS3 Gimbal Settings | From SHAKY To Super Smooth Footage!

Рет қаралды 114,450

7 ай бұрын

Get ready to level up your gimbal game! I've got the inside scoop on a hidden gimbal setting that can transform your footage from Shaky to Super Smooth. Say goodbye to shaky footage and hello to effortlessly smooth shots with these must-know DJI Ronin RS3 Gimbal settings.
Become A Gimbal Pro: The Gimbal Academy: geni.us/lr6f4cE
👉🏼 Download my Gimbal Settings here: geni.us/tMSkP
Revamp Your Gimbal Game:
These 4 GIMBAL TECHNIQUES Makes All The Difference!
• These 4 GIMBAL TECHNIQ...
Learn how to Avoid Shaky Footage:
• Shaky Video? Superchar...
Gimbal Basics In 10 Minutes | From Beginner To Gimbal Pro:
• Gimbal Basics In 10 Mi...
📖 Unlock a treasure trove of savvy GIMBAL tips and tricks: geni.us/PYlp
🎥 The Gimbal & Toolss I Use 🎥
Gear I Use Right Now: geni.us/1CEY5i
The best Quick Release Plate: geni.us/Aqlw
Gimbal Side Handle: geni.us/LABApv
Best Midsize Gimbal: geni.us/AEsDUPa
Best Pro Gimbal: amzn.to/4076Lnk
Prefered Compact Gimbal: geni.us/RBRV
Ulanzi Falcam f38: geni.us/YmdVD
🥇Become A Gimbal Pro:
The Gimbal Academy Course: geni.us/lr6f4cE
Newsletter: geni.us/NtawyGA
👉🏼 Downloads:
Gimbal Settings & Guides: geni.us/QPkP
Gimbal Mastery #101 - E-Book: geni.us/PYlp
Gimbal Firmware Downloads: geni.us/53Ky
👉🏼 Creative Tools & Discounts:
Sell your course & products with SamCart: geni.us/F6tCje
Audiio Music & sfx: geni.us/tBu3K8S
Course Creator Pro: geni.us/cSP89
CinemaGrade Color Grading: geni.us/sxZngwl
MorningFame: morningfa.me/invite/makholm
Lens Distortions SFX: geni.us/tU68
Motion VFX Templates: geni.us/zFBOeOW
Sell Online Products with Sellfy: geni.us/53Ky
👉🏼 Gear & Sponsors
Gimbal Accessories: geni.us/vk9gfks
Panasonic S1H Cinema Camera: geni.us/EV33Y9
The Drone I uSE: geni.us/9NH1
Gimbal Of Choice: geni.us/AEsDUPa
Special Thanks To: www.focusnordic.dk/
Panasonic Nordic: bit.ly/2EGsMk9
Subscribe To Peter Makholm: bit.ly/2Sk0EJw
Disclaimer:
Links included in this description might be affiliate links. If you purchase a product or a service with the links that I provide, I may receive a small commission that will help support this channel, so I can keep creating content each week. There is no additional charge to you. Thank you for the support; it is highly appreciated.
#gimbal #GimbalTutorial

Пікірлер: 146

@toddlaitar 4 ай бұрын

I have had my RS3 for a year now, upgraded from the Zhiyun Crane 2. This gimbal was a huge step up but was still not 100% happy… until now! Dude!!! The tilt dial function!!! I had no idea, absolute game changer! The custom settings and deadband settings are amazing improvements to how this thing works! Amazing info, great job!

@bastian8597 2 күн бұрын

Thanks for all the advice!

@ibrahimrammal6434 3 ай бұрын

Smoothly explained mate! Thanks!

@AKTINESfilms 4 ай бұрын

Thank you for this clear and helpful video.

@gregholden 2 ай бұрын

Very helpful thanks!

@djamesvideography 6 ай бұрын

Perfect, needed this! Been dealing with so much shaky footage despite the gimbal being balanced. Thanks!

@muneebahmad611 6 ай бұрын

This was extremely helpful. Thank you so much 🙏

@fredtrivett 3 ай бұрын

Thank you so much this is exactly what I was looking for!

@VisionbyNoble 3 ай бұрын

Thanks for this!

@muteoptics6737 7 ай бұрын

Thanks, Finally a great explanation of how to set up the rs3

@kissaac 2 ай бұрын

Exelente video gracias

@lsvision1835 5 ай бұрын

THIS VIDEO IS GOLD Thank You ⭐⭐⭐⭐⭐

@joyoffilming9500 7 ай бұрын

Hi Peter, everything what you explain here is totally right. Anyway, there is a final step up our sleeves if the footage is still jittery (assuming balancing and all settings are done correctly): BRING THE GIMBAL SLIGHTLY OFF BALANCE FOR THE JITTERY AXIS (YES, off-balance!) Without jumping into deep-dive engineering explanations: There is a principle tendency of control-loops for stabilizing mechanical systems to start 'self oszilation' in case of a perfectly balanced mechanical system - in our case a gimbal axis. In simple words: the control-circuits just do not know into which direction to counter-act an upcoming deviation of the axis. The simple solution is to put the problematic axis very slightly off-balance - only so slightly that it still does not want to completely swing out when the gimbal is turned off. This keeps the stabilization control-circuit for the axis permanently slightly engaged. Again, the off-balance needs to be very slight and should not make the motor overheating. I just solved the often posted horizon jitter of my old Weebilll S this way within a minute - now, the horizon is like spirit level. Where did I learn this trick from: It was my control-systems & cybernetics professor 35 years ago who told us about the secrets of stabilization systems for helicopters.

@PeterMakholm 6 ай бұрын

Hi, Interesting topic. I would like to know more about this, so if you are interested in a quick chand on zoom, please reach out to me peter@thegimbalacaemy.com

@johnnyweissmuller5838 6 ай бұрын

@@PeterMakholmhe is right, it is better to have a little load on the gimbal motors on than no load, they dont know what to do and the control loop can spin out of control

@PeterMakholm 6 ай бұрын

Yes that is correct. I talk about this in my course and have also mentioned it in other videos here on the chanel . But thanks for sharring!

@thomasg.9054 5 ай бұрын

Just wanted to say thanks for this video! Been looking for settings recommendations for my RS2, and the difference in the footage I got after watching this was night and day! I used your PF and PTF settings, and I'm thrilled with how smooth the footage I'm getting is. So, thanks again for putting this out there!

@Nevadaskye1017 2 ай бұрын

Thanks! As someone new to gimbals this resolved all the small issues I was having with my RS3!

@wzgorzasokolskie5906 2 ай бұрын

Thank you!

@eastendyves 2 ай бұрын

That was super helpful, thanks

@clairebflores 2 ай бұрын

This was super super helpful thanks so much for this

@doublecmonster 6 ай бұрын

Finally a video that make sense!!! Now my gimbal is set to extra smooth!!!! Thank you!!!!!!!!!!

@user-mh2pt5cm4n 3 ай бұрын

Excellent tutorial right before a music video shoot. Just what I needed! Thank you so much.

@fansofER 2 ай бұрын

You are the man, Peter!!!

@paulfairchild8942 Ай бұрын

Another priceless video from you. These settings helped my DJI RS3 filming immensely! Thank you.

@thiagolimadop 5 ай бұрын

Thank you!!

@BaldManVisuals Ай бұрын

Thanks mate! ❤

@ok4240 2 ай бұрын

you make my day, thanks a lot !

@jaschavdb 6 ай бұрын

Thank You

@glenmcdowell Ай бұрын

You fixed my drifting horizon line! RS3 Deadband. Thank you so much.

@Passion_Video_and_Photo 13 күн бұрын

thx!

@Maintain-1 2 ай бұрын

Wow, this video changed the game for me, was frustrated with my RS3 gimbal until I watched this video. Thanks Peter for this.

@simonjacobsphotography Ай бұрын

Well, that changed my life! Thank you!

@79GDawg 4 ай бұрын

Thanks very much for this great video Mate. It helped a lot 😀

@ikshitpatel 7 ай бұрын

Love your gimbal dedication

@PeterMakholm 7 ай бұрын

Thanks, I try to do my best at what I do!

@JSAvenger 6 ай бұрын

Dude i owe you a lot. This is exactly what i needed. A FCKING DEADBAND! I completely forgot about that. Thank you so much for your tutorials. Really. You saved me a ton.

@AndreLopez4 5 ай бұрын

You were the person who could explain it in more detail and at the same time show the result on the gimbal. congratulations. Could you make a video with more details on the app's parameters on the DJI RS3 Pro?

@whistlingfrogmedia3411 7 ай бұрын

Perfect timing, thanks Peter.

@PeterMakholm 7 ай бұрын

You are welcome...

@paulpiasecki 21 күн бұрын

Peter, this was an incredible tutorial!

@TheBucketListRide 7 ай бұрын

Love your gimbal dedication... Always to the point.

@PeterMakholm 7 ай бұрын

Thanks mate.

@officialcisko 2 ай бұрын

Great settings. Made very minor tweaks to suit my needs but in general these settings were on point.

@cenksenci3075 2 ай бұрын

You are a diamond, sir, thanks for the explanation and the PDF.

@damiensandoval1007 3 ай бұрын

Great video my dude.

@Mrthezanax 7 ай бұрын

Very useful video. It's what I needed. Thank you so much!!!

@PeterMakholm 7 ай бұрын

You are welcome my friend.

@vahidamini1863 3 ай бұрын

Thanks, ...✌

@EduardoPerezVideografo 7 ай бұрын

thank you so much Peter. All your videos are very useful, I think they are wonderful

@PeterMakholm 7 ай бұрын

Cheers for the feedback! Wishing you the smoothest shots in all your future projects

@mattm7426 3 ай бұрын

You're a legend

@martinadamcz 7 ай бұрын

Thank you

@PeterMakholm 7 ай бұрын

You are so welcome. Enjoy....

@deeflexstudios 22 күн бұрын

Omg you are awesome i been struggling since i started using gimbals two years now and i couldn't figure out why my gimbal reacts pretty fast to my movements Deadband setting is the answer 😀

@goldyphotography21 5 ай бұрын

Thanks U Ji

@adamwalker9046 Ай бұрын

New subscriber, outstanding video.

@MichelleJarni 15 күн бұрын

Such an excellent video. I seem to be having real issues with my pan motor moving too far to the left and right which is driving me nuts. Those user settings have definitely helped tighten it up a bit though thank you!

@volkanceylancom Ай бұрын

thank you so much for this amazing video, ı have only watched half of the video but ı learned two important information. ı subscribe to your channel now 🤙

@JTechWP 2 ай бұрын

Great tutorlal, just bought RS3 pro combo today, thanks for the PDF, be using it with Black Magic 6K full frame and Sigma 24-70mm Art lens :)

@AlperFS 7 ай бұрын

bro you are great

@PeterMakholm 7 ай бұрын

Big thanks for having my back!

@MichalBudzik_ 5 ай бұрын

Great video. Just a quick advice please. I will be buying my first DJI Gimbal (rs3 or rs3 mini) And wanted to know if these would accept camera with PROMEDIAGEAR L BRACKET - arca Swiss type plate.? Many thanks

@SaadJatt 6 ай бұрын

Do i need to calibrate the gimbal if i take of the camera after shooting and put it back with a same setup is the calibrating or autotune the gimbal often is good thing or bad

@matt79hz Күн бұрын

I like the way you've set the briefcase handle. Side setup may allow a more robust core. Can i do this with the DJI handle ? Im also torn whether to buy the focus motor/handle "combo" kit or just get the basic kit and a third party handle. Looking at real estate video and lower cost point weddings at a later date. Perhaps follow focus for a wedding isn't necessary for quick captures.. 🤔 any thoughts ? Ill def be dialing in with your recommendations to begin with. V cool 😎

@KRAFTMedia 4 ай бұрын

Also finding that the screws on the falcams see to not stay tight both a the bottom of the gimbal and the monitor. any advice please

@gamepat9 7 ай бұрын

Thanks for this guide! I'm looking forward to finally tuning my RS3 properly. I didn't know you can only tweak some settings in the app. I recently tried to mess with the custom settings on the gimbal already, but I still had some unwanted jerkyness (epsecially pan).

@PeterMakholm 7 ай бұрын

Yeah, start with my settings and then correct them so they will fit you setup. 😎

@khaledalabsi9052 5 ай бұрын

لوسمحت كيف اقوم بتنزيل التطبيق

@fofanfofan7602 4 ай бұрын

hi,thanks for video. have question. my lumix panasonic s5 mark 2 didn't connect with ronin rs3,bluetooth is working ,on,registered on lumix site. 2. maybe need usb conectbto gimbal before?.3. Can't findbany video s about panas and ronin rs3 connection

@gardien340 7 ай бұрын

Great tutorial @PeterMakholm as always, much appreciated. I just pulled the trigger for your tutorial PDF. I wonder if there‘s a trick to put the gimbal upside down for low shots. I always struggle with that.

@PeterMakholm 7 ай бұрын

Thanks for the support. Yes, there is, It is not that hard to do, I do it while the gimbal is on. Just slowly Thun the handle sideways over the over the roll arm and when you got it up side down tripple tap the trigger then the gimbal will turn around, tripple tap again and it turns around again and it is centred and ready to go.

@gardien340 7 ай бұрын

@@PeterMakholm much appreciated (again!)

@kontrabjorn 5 ай бұрын

Perfekt og mange tak - jeg fattede hat af hvorfor jeg ikke kunne få den helt steady bløde bevægelse som jeg faktisk havde en ældre gimbal. Troede det var for tunge optikker sammen med mine bevægelser. Så tak for at forklare deadband Må afgjort se nogle flere af dine videoer

@Rickydbaby 2 ай бұрын

What are your thoughts on Orbit Follow mode. On vs off. No one talks about it. Thinking about just leaving it on.

@KawanAzad-vf8to 11 күн бұрын

7:25 premier pro stabilizer is shown look at house above

@erikbelobrad1536 3 ай бұрын

THANK YOU VERY MUCH!!! You saved my mental health! I bought a lot of expensive equipment, I learned how to set the camera correctly, but the gimbal still didn't work, thank you 🙏🙏🙏

@ArkadiuszLmx 2 ай бұрын

0:19 is that rs3? Can it handle so big setup? or it is there rs3pro/rs2. How do you find comfortable rs3 grip to use? isn't too small/tight for hand?

@montavio 6 ай бұрын

Anyone else think this was a peter mckinnon video?

@waynosfotoscameras 6 ай бұрын

@dcfanforlife533 6 ай бұрын

For a second, yes lol Still this is a quality video!

@TJackSurvival 2 ай бұрын

Nope just you 😂

@User-pq2yn 6 ай бұрын

Thank You very much Peter! This video is a real treasure. It's been almost a year since I purchased the RS3, but there are still some unclear nuances. Thanks to Your videos, I learned a lot. I would also like to clarify one detail related to RavenEye. On the smartphone I get a stable picture, everything is fine, but on the RS3 screen, when you swipe to the right, an image should also appear and you can use Active Track by touching the screen. But I am getting a black screen even though I have connected all 3 cables. Is this a gimbal bug or am I doing something wrong? Thank You!

@PeterMakholm 6 ай бұрын

You can only use RavenEye with the screen on the gimbal with the DJI RS3 PRO. That is properly why you can't make it work.

@HEATHERTITUS Ай бұрын

My APP doesn't have an advanced setting on my phone. I looked for another version of the APP I don't see one. Can you please provide more info on this. my footage looks bad and I want to adjust the Dead Band.

@vzbeatz1706 5 ай бұрын

I'm still currently using my Ronin m and I'm seeing micro jitters, what advice you have for me because the app is not working? '

@Alpha_Kevin_Media Ай бұрын

Going to make a Video like this for the RS4 (Pro)?

@kartsofficial1 6 ай бұрын

New subscriber here🎉🤝

@david243121 4 ай бұрын

Peter- I noticed you increased deadban from previous gimbal setting videos. My concern is that the movement won’t be smooth because if you try to move slowly into a shot, your pan may not follow until too late. Thoughts? Also, do you still shoot IBIS off??

@maxfalduto4034 7 ай бұрын

Hi, It's possible to know if the Handheld Gimbal Grip you are using is compatible with RS3, because the page you linked seem does not listed rs3 but DJI Ronin-S, Ronin SC 2 only. Thanks a lot! Finally a useful video!

@PeterMakholm 7 ай бұрын

The Side handle is compatible with all gimbals.

@maxfalduto4034 7 ай бұрын

Thanks a lot @@PeterMakholm

@soarinfan 7 ай бұрын

would you be able to something similar with a weebill s ? many thanks

@PeterMakholm 7 ай бұрын

Hi, yes the video is already out there. kzfaq.info/get/bejne/jst5m6t8zJi0aHU.htmlsi=HQLDPS1trNM6b25m

@ilzanakbar998 Ай бұрын

its also work on rs4?

@Marcin_pl 3 ай бұрын

Awesome, thanks a lot. I thought it was because i totally suck and that the gimbal sucks as well lol.

@HWGearStory 7 ай бұрын

Saw you didn’t update the gimbal to the latest firmware, do you think there are any issue at 04.00 compare with 02.00? I found that the 04.00 need the gimbal stay on a flat service to wake up, otherwise it couldn’t balance, while the 02.00 did not.

@PeterMakholm 7 ай бұрын

Correct, I did not update, because it came up during the week I was filming the video, and I didn't want it to change any thing before I was done with the video. But I will update it in the future. thanks for sharing a potential issue with the update.

@VladimirKolombet 15 күн бұрын

I changed my setting in basic and advanced but whewn I hit auto tune. It calibrates it but goes back to default. Is that supposed to happen?

@zog99z 3 ай бұрын

What is the name of the program? I have a regular Rs3 ronin

@PeterMakholm 7 ай бұрын

Hi folks, I hope this Gimbal Tutorial will land well. if you got any questions drop them below.

@EXbobomb 3 ай бұрын

Thanks for this advice, I'm quite pissed off to find out that after spending this much on camera equipment it requires setting up an account to activate, and an app to control all of the settings though. When DJI eventually no longer supports these things, some of these devices will never be able to be activated to controlled to their fullest extent.

@edi18912 5 ай бұрын

I have a Ronin rs3 and im wanting to film with a more hand held look so I can make fast movements. What would the best settings for that?

@sufy.r 5 ай бұрын

just shoot handheld bro

@neilseiffer 7 ай бұрын

Great tutorial. I'm looking to purchase the DJI RS3 PRO for my Lumix S1H. What setting for S1H would work best for real estate tours like you are doing? I have Ninja V external recorder to shoot 422HQ V-log, or do you recommend in camera recording. with different codec?

@PeterMakholm 7 ай бұрын

The S1H is great with the RS3 PRO. I would use the settings i have listed in the PDF. when I shoot real estate I record directly in camera.

@neilseiffer 7 ай бұрын

@@PeterMakholm Are you using Lidar auto focus system for real estate?

@PeterMakholm 7 ай бұрын

@@neilseiffer No I use manual focus and a high aperture. I set the focus point where I want to end the shot and then walk in to the shot. If it's a long shot, the start might be a bit out of focus, but no one will never notice, because i often speed ramp in the transitions.

@neilseiffer 7 ай бұрын

@@PeterMakholm Thank you. Are you using 12mm, 14mm, 16mm, 24mm, or something different for interior tours?

@PeterMakholm 7 ай бұрын

I am using a 16mm for wide shots and 85mm for closeups@@neilseiffer

@michasteinmann5614 4 ай бұрын

Hi thanks for the video... I just bought the RONIN RS3 Gimbal and would like to buy the Gimbal Side Handle that you are using. (DH03 Handheld Gimbal Grip) but RS3 is not listed as compatible ?

@PeterMakholm 4 ай бұрын

Yes that is the one. you can find the direct link to it in the description.

@PeterMakholm 4 ай бұрын

It works perfectly with the RS3

@Nathanmedia65 5 ай бұрын

HELP! I’m getting camera shake, which is random as my gimbal has working fine for months! I use a portrait mount as I shoot vertical. Perfectly balanced a million times and still shaking… after software updates ect

@mrb888 7 ай бұрын

Very timely, as I have been having problems with micro jitters lately! I have already auto-tuned the gimbal and set the deadband to high. But whenever I walk, I can see these micro jitters that are so annoying. What settings do you think I should look at?

@PeterMakholm 7 ай бұрын

Micro jitters is always a problem with gimbals, but try to make the gimbal as smooth as possible and then practice how you walk, because the micro jitters comes from the impacts that we create when we walk.

@qhuamilhaosphotography4636 6 ай бұрын

Well said, sir But please how can you balance text using the app... I guess in your video you used the gimbal itself to check for a proper balance

@PeterMakholm 6 ай бұрын

When you have balanced the gimbal, you can use the app to show you if you got correct balance.

@qhuamilhaosphotography4636 6 ай бұрын

@@PeterMakholm and please how can I use it because anytime I try using the app...it refers me to tutorials instead of the balanced text I wish I could send you an image of what I'm saying

@qhuamilhaosphotography4636 6 ай бұрын

Please sir if you're on IG I think I can send you the image there

@adsatalkleg 7 ай бұрын

Thank you, you are creative and I learned from you. May God grant you success

@PeterMakholm 7 ай бұрын

Thanks mate, that is really heart warming to hear.

@StrongFrontTV Ай бұрын

Thank you Peter, the pdf link is dead FYI. But I'll just watch the video again.

@PeterMakholm 29 күн бұрын

Thanks for the heads up. send me a mail and I will send you over my gimbal e book. Thanks mate.

@StrongFrontTV 28 күн бұрын

@@PeterMakholm Thank you Peter! sent you an email.JG

@KRAFTMedia 5 ай бұрын

Hi Great video, I find when I connect the rs3 to the app I go to user profile and can only get pan follow ? I click on it but the drop down menu is only available when the ronin is not connected.. when I auto tune it also changes your settings thanks

@toddlaitar 4 ай бұрын

You need to switch the switch on the side of the gimbal and you will see the app switch over to the next group.

@KRAFTMedia 4 ай бұрын

missed him doing that ! thanks :) @@toddlaitar

@toddlaitar 4 ай бұрын

@@KRAFTMedia it was real quick, I had to rewind it to see.

@oraclemedia9266 3 ай бұрын

What is the name of this app? I only find Guide App. ...

@ImagineVideoclips 7 ай бұрын

Settings are very specific for the type of shoot you're doing. There are no settings that will be best for all types of shooting. What would be the best settings for real estate shootings/interiors?

@PeterMakholm 7 ай бұрын

That is the settings I use for Real Estate shoots.

@miguelflores-xt7dv 6 күн бұрын

Mine doesn’t have advanced I have rs3 mini

@fertassaroli 6 ай бұрын

On your opinion is worth it upgrade RS2 to RS3?

@PeterMakholm 6 ай бұрын

Not for the stability they are the same. but the autolock feature is amazing.

@SergiiStarodubtsev 3 ай бұрын

The app , u have download it? It doesn't exist on the market app. Why..? I don't want inject any malearre on my phone..

@feezotolegacy5603 10 күн бұрын

gonto dji website

@KinoMalek88 2 ай бұрын

Still have exactly the same problems. Didn't help at all.

@jonmaple3089 Ай бұрын

I have left you messages, you or no one at your company is replying. I paid for your gimbal settings and I have never received the PDF. PLEASE check you emails.