Thanks for persevering when you ran into trouble and it didn't look like it would fit. Its nice to know that things don't always go so easy for the 'pros'. And of course it shows us what to do when we do encounter that situation. Many thanks!

Thanks for these useful videos! I have a 2014 Peugeot 107 myself so i definitely can use one of them in the future! 👌🏻

Thanks for these videos. I first tried the one to gently bend the door back into place and that worked for a while, but now the puddle's back I'm hoping to invest in a new seal and hope that works!

Nice recovery there mate. well done. Thanks for the measure aswell.

Thanks for another great tutorial! I sat on the edge of my seat, waiting to see if you would struggle with excess slack! Been there with the tailgate seal a couple of times and it was a nightmare of a job... Same issue - seemingly too much slack until you reposition it a few times and find the 'sweet spot'. I've even managed to ruin a brand new tailgate seal by tapping it on with a soft-faced mallet. That wasn't the cleverest thing I've done! Being gentle with these is important, otherwise the "U" shaped metal clips inside the rubber channel can get distorted. A common leak with these is supposedly around the bodywork flange. There is a soft white, putty-like, mastic in the rubber's channel which is supposed to stop water wicking through the channel (around the bodywork). When I replaced the tailgate seal, I removed some dirty mastic from the body and gave the area a good clean and dry before fitting the new seal.

Thanks for explaining how to insert new rubber seal. You just made my work look easier as I was going to pay some else to do the job for me. Love it!

Great video just did this on my Skoda Octavia! One tip I can give is to use some silicone spray. Mine was stubborn and didn't want to fit properly even after some force. I lightly sprayed the inside of the seal and then it fit like a glove!

Ello Fella... Great video as always. I know it can be hit & miss with aftermarket parts, but generally, they're not too bad & obviously can be a lot cheaper. Stay safe en good health to you en yours. Alan L200

Good content mate

neatly done. thanks

Thanks nice video! Unfortunately I could not find the same sealing rubber with seam, that comes with it. Now there is a gap between the plastics and the sealing rubber. Is there any idea what I can do?

You legend. Thanks for this video. I wonder how long the boot seal is? I got to replace the onside front and boot seals.

I've just come across this mate it might sound like a daft question but I can't find it anywhere online where to find a rear window seal for my pegeout 308 and mines is deteriorated and cracked / come away from the window. Just wondering if you'd be able to help or give advise

Thank you for this!! Do you have a link or a video on a seal for the back seat windows? My seals has a chunk missing and when it goes for a car wash the water splashes in and can see daylight out of the window seal.

Great video, thanks, my driver side footwell is absolutely sodden, how do you go about finding out where a leak may be coming from? Can rubber mats make the problem worse? I removed the rubber mat I had down, dried the carpet, it stayed dry for weeks untill i put the rubber mat back then a week later it was sodden again! in all honesty I assume it was just coincindence, my initial thought was air con evaperation pipe blockeage but i ran the aircon constantly once dry and it didnt get wet

Hi, Just watched the video of you changing the seal on the Peugeot 107 front door, is the seal the same measurement for the back passenger door as I need to replace this - also do you have the link please for the aftermarket for me to purchase a seal. thanks

Thank you for this really brilliant informative video, can I ask you we have the 3008 and needs both driver and passenger doors seals replaced where can we purchase these seals? And do you think 4 metres per door be sufficient? Thank you again for the amazing tutorial.

Thank you❤

there's a white putty like material behind the original seal on my car. did you fully clean off the metal lip or leave the old putty/seal on? many thanks

Hey I have a 2006 Peugeot 107 as you know by now 😂😂 and I wanna replace the front bumper with one from 2009 to 2011 only problem I don’t know if it fits I think it well but I don’t wanna risk 130 quid on something that won’t fit any chance that you know if it will from what I can tell all of the mounting holes lineup and looks right

I've brought the seal from your link but bit afraid to do it after read it don't sit as flushed like old one , anyone got any pictures to show as really need to do this ...thanks

Thanks for this video, it’s a much easier job than I though. Is it the same for all cars?

Im having issues with my seal on left rear. Volvo S40 2006. My issue is that the seal is loose. From like half top to middle right. When i push it in it just pushes out like if the seal is too short. Dont know how to fix. The seal does not have a grabby feeling when pushing it in. I have not manipulated the seal in any ways. I mean like banging on it or such. A new one as you say costs about 150 euro.. Any ideas how to repair? Maybe rotate the seal so the "bad" part goes to the bottom or at the left side. Dont understand why it seemt that the seal are short? Do i have to apply some kind of chemicals to the lip on the car so the seal grabs better? glue it down with silicone? Dont know if there are something there OEM.. some kind of something. Maybe put on tape to make it a tighter fit? Please help.

How many meters of the door seal will I need for the driver's door of a 3 door Mk 1 Aygo please? Just asking in case someone has already measured it accurately, to save me the pain of trying to do so on my drive in the rain. Many thanks for any help.

Glad you never cut that seal mate as i could tell it was correct.....all you need to do is push against it in the opposite direction of fitment as you go around to take away any excess. £130 quid for that is a joke and may not be the problem as water ingress could be through the crappy polystyrene seal behind the door card which was the case on my daughters car not the seal. These cars are a nightmare with water ingress as we run 3 of them and done all the usual water leak problems and i am now considering drilling some large holes in the bottom of the doors to stop water building up inside as in the most recent diabolical weather we have had i noticed the doors on my daughters car holding a lot of water inside which you could hear swishing about when opening/closing the doors ? Water was building up and coming through the inner door shell through the polystyrene cover and lapping down the inside of the door with water forming on top of the door seal then running into carpet ? Cured this with some car body seam sealer smeared around the bottom of the polystyrene door cover then replaced door card and all appears good,however still not happy with the water build up inside the doors,hence why i am considering drilling a couple of holes in the bottom of the doors so the water escapes down the outer cills on the car ? what do you reckon....Let me know your experiences with door leaks on these cars as they are a nightmare and the only negative for me owning them,otherwise cracking little motors....currently have a 2010 c1 3-door vtr+ and 2 x pug 107's both 2013 years so all keep me busy ( just put a exedy clutch in c1 vtr last week )....Keep up the good work pal,regards.

Thinking of getting a 107 again due to my car not being ulez compliant when they bring it near my area next year. Is yours the allure spec as I'd aim to get this trim model from 2012 when they made the last face-lift.

Hi mate, love your content i have a question if you could help me i have a 5 door Toyota aygo the rear passenger side floor is soaking wet do you think the passenger side door seal needs replacing or would you say i would need to get the rear side passenger door seal cheers.

Hiya have you used the aftermarket seals on your link are they are good as the genuine? Thanks in advance

Hi can you help I have a Citroen c2 after I have released the handbrake and pull away I get a beep , it has become really frustrating as all obvious checks had been done on it plz help. Thanks julie

How many metres would I need to a 2009 Aygo 1L four door?

Hi, Tanks for these nice Video! I have a 2008 Peugeot 107 5 Door. I still have lil bit Water behind Co-Pilot Seat in the Top right Corner and dont know where this comes from. I made already every Leak tips from whole KZfaq and fixed already all... only these place behind Co-Pilot Seat no one can find where it comes from...maybe you or anyone else have a hint? My Question about your Video is: These Door Seal fit for all 4 Doors? Or only for these Door you show in your Vid? Sorry for my bad english.. hope you still understand me ^_^

I tried to change mine with the factory piece but now I can’t close the door properly.. any suggestions?

Whats the Red light that comes on the Rev counter when you open the Door ???

What size will i need for the rear doors pls

I fitted a 26mm × 17mm (same seller as descrp) door seal to the driver's door of my 3 door C1, then dried the carpet with a heater. A few weeks later, the driver's front & rear carpet is wet again. I can see where the water is going over the top of the seal, like it was doing with the old seal. Poured water down past the window to check the vapour barrier. No leaks there. I'm tempted to buy one of those D or L shaped, 3M taped seals off eBay, & add an additional seal. They're dirt cheap

The wife says it straight away. The guy battle until he gets it right. That the difference the right man for the job.. I can't hear his wife saying well done.

6:00 GENIOUS 🙂😃😅😂🤣😁😁😁

I am wondering why the hell I can order this seal (which is made in Poland) at amazon for 3.89pounds for meter and... at the same time living in Poland I can buy the same seal with 35pounds per one single set for one door at domestic market. WHAT?

The aftermarket one you linked to wouldn't cover the cut edge of the carpet.

hi lads their selling the crown jewels again and there will be more, lots more. Where,s the new stadium?

Archie Gray(alan smith) no KALVIN

spurs spurs what have they won ffs