Peugeot 205 T16 rally car - Scratch Building & Improving the 1/24 Heller Model kit

No video

Peugeot 205 T16 rally car - Scratch Building & Improving the 1/24 Heller Model kit

Рет қаралды 2,249

Күн бұрын

#groupb #scalemodel #peugeot
Hello and welcome to BOAB Models - today we'll be building the Peugeot 205 T16 Evo 2 World Rally car in 1/24 by Heller. The kit depicts the '86 Tour de Corse winner, but I'll be modifying it to build a car from the British Open Rally championship. As the kit only had 41 parts, I'm scratch building and adding a lot of extras from the spares box plus custom decals. Give it a watch and let me know what you think. Cheers!
Please leave a comment, like, share and subscribe!
Visit BOAB Models' shop, for official merchandise: boabmodels.mys...
Purchases go to support the channel
Follow the channel on Instagram @boabmodelsthomas / boabmodelsthomas
Follow us on Facebook - / boabmodels Communication - buildingonabudgetmodels@gmail.com
Link disclaimer - some links found in my description may be affiliate links which means I may make commission or earn benefits on sales using codes or links. This is at no extra cost to you but it does support me and the channel. Thank you!
#groupb #wrc #Heller #peugeotsport #scratchbuild

Пікірлер: 49

@BOABModels Ай бұрын

Thanks for watching! Would you build one of these?

@janvanrenselaar5998 Ай бұрын

Hi Thomas,You did very well with a poor basic kit. I will not build one of these kits,because my wife thinks i am having a very wide,angry vocabulairy already and i don,t need to invent new severy illnesses. But i am glad you pulled it of and made it a decent looking car from a distance. That has nothing to do with your build quality,s but the kit itsell. And the numbers you gave it is just a confirmation

@ScaleModelAdventures Ай бұрын

@@janvanrenselaar5998 in order to avoid cursing, one useful advice while making these kits is to glue as many parts as possible when unpainted. Even though in many instruction leaflets is mentioned only these parts you have to glue together, in older instruction booklets I've seen that the area in which you cement the parts together was also mentioned!

@GuidoCavana Ай бұрын

No thanks, I still have 2 205 turbo 16 Evo 2 in 1/43 scale from Racing 43 to assemble and that's enough for me

@janvanrenselaar5998 Ай бұрын

@@ScaleModelAdventures That is what i always do. Assemble what is possible and paint then. Nowadays i tape of for example the struts from the tamiya kist and dont paint the innerbackside of the brakediscs. But this was worse that a re-re-re-re issued ford mustang from AMT. Not even the front bumper and ligts was fitting good under the hood or bonnet. Just look at the gap at the headlights. Sorry but when i pay $25,- for a kit i would be cursing 48 hours straigt

@johnscarsandstuff Ай бұрын

I probably wouldn't build one for two reasons. It's not a subject that engages me enough, even though it is a very attractive subject for a model. Having seen your review and build I don't think I would get enough pleasure from building one for it to be worthwhile.

@scaleffect Ай бұрын

Thanks for sharing all the tricks on how you upgraded this kit with the added details. I always learn something new when I watch a BOAB video!

@BOABModels Ай бұрын

Thank you, my friend! Very kind!

@Sarah-JaneR32 Ай бұрын

wow you really did go to town improving the kit, well done, so impressed with what you've accomplished

@BOABModels Ай бұрын

Thanks a lot, Sarah Jane. Such an iconic car needed to be done justice.

@Pinkys-one-offs 11 күн бұрын

That came out amazing

@BOABModels 10 күн бұрын

Much appreciated, thank you!

@duncanling2127 Ай бұрын

Another top build great scratch building

@BOABModels Ай бұрын

Very kind, thank you!

@micktuck5377 Ай бұрын

I’ve just completed this kit and made it into a road car so avoided the decals. Like your improvements.

@BOABModels Ай бұрын

Thank you! Good idea!

@richardlee1092 Ай бұрын

Great job Thomas! I think you’re many additions you created added considerably to the final product! Nice work. 😎

@BOABModels Ай бұрын

Thanks so much, Richard

@GuidoCavana Ай бұрын

Really good job. Thank you for sharing the experience of how to improve a poor and approximate kit.

@BOABModels Ай бұрын

Thank you!

@BobbyG-bp9xr Ай бұрын

What a fantastic build! When I watched the unboxing review I had my reservations about the kit and wondered how much better you could make it. Well, to say you've improved on the kit would be a slight understatement to say the least! The scratch built dash looks incredible as does the whole cabin! Sometimes the little things you did, have made such a massive difference, beyond what you would reasonably expect. It just goes to show what you can do with some skill, (or alot!) imagination and a whole lot of patience! Extremely impressive build mate. I haven't the patience to improve a kit as you have done, maybe little bits and bobs, but I wouldn't waste my money on the kit in the first place. I've wasted so much time and money on rubbish kits in the past, I'm just not prepared to do it anymore. Congratulations on a sterling build, it really is a wonderful looking model. Another fantastic video, thanks for posting. Bobby

@BOABModels Ай бұрын

Thanks so much, Bobby. Really appreciate it. Obviously I went all in on improving this one, but hopefully some of the improvements I made can be used in isolation if there's a small part which needs to be improved. For instance, some of the cabin improvements I did here are similar to ones I did on other kits where I turned road cars into race cars. I think I'll be doing a kit with all the necessary details in the box next time though!! 😅

@KarlScaleModeling Ай бұрын

Great job Thomas, you have really built a nicely detailed 205 there despite all the problems you encountered 👍🏼 Well done 🙂

@BOABModels Ай бұрын

Cheers Karl

@ScaleAutoGarage Ай бұрын

Very interesting kit and your improvements were top notch. The end results seem worth the effort. Nice work.

@BOABModels Ай бұрын

Thanks, Spencer! I'm glad as there were times it felt like I was wasting my time!!

@johnscarsandstuff Ай бұрын

Nice work. Scratch building and detailing is a great way to make your mark on a build. I suspect the model would look very plain and basic without any additions.

@BOABModels Ай бұрын

Cheers, I agree. I think you could build this in an afternoon if just doing it out of the box.

@ScaleModelAdventures Ай бұрын

First of all, you could ask a new decal sheet from Heller and it's possible not to have to pay even a penny for it. I did this recently for a Peugeot 905 kit, whose decals had the same problem. If the decal sheet is deep blue, it means that you'll have problems with the decal placement; they're extremely thin and fragile. However, I built this kit a couple of years ago and the decals were as they should be while the decal paper was light blue. I remember that I put one decal in the water and by mistake I left it there for many hours... the decal still on paper! I would like to build it again, but not the rally car, the road version instead.

@BOABModels Ай бұрын

That's a very good point, thanks. I have requested replacement decals from Revell in the past. I have also built Heller kits such as the Alpine A110 where the decals were excellent.

@valerycarpentier852 Ай бұрын

Great work! I’ve got this kit, and I think I might 3D print the parts I need, eventually.

@BOABModels Ай бұрын

Thanks! 3D printing is a good idea. Good luck!

@brucek3217 Ай бұрын

Excellent upgrades you added - your narration is very good. I'm working on a Fujimi BMW GT3 and I see several things in here that will be helpful right away. I built an old MPC X-Wing Fighter and the decals wanted to fall apart. I used Testors lacquer clearcoat 1261 on them and with that coating it solved the problem. Not to light not to heavy when spraying. And you have to cut the decals out one by one after that since it will become one big decal sheet then. But it worked. 👍 If that helps you.

@BOABModels Ай бұрын

Good tip with the decals! I should remember that for next time.

@toysbinotto3734 Ай бұрын

Wow, you made this car look very well! I was wondering about buying this kit but as I see it's (sadly) not a great one, I have a very rocky relationship with Heller kits anyway, I bought their racing Jaguar Type E so it could fit with my Ferrari 250 GTO from Le Mans 1962 but the kit was so poorly made I never finished it. I was wondering about buying this kit too but I think the Tamiya kit would be a better choice for me, still, you did amazing job with improving the detail on this one, great job!

@BOABModels Ай бұрын

Thanks so much. I wish the Tamiya was reissued - it would be very popular. Have a look at the Revell E type if you want a higher quality kit.

@dvdw_graphics_crafts 7 күн бұрын

Haha, opening parts just to find it lacks details on the interior... I also like the opening door feature; thought it was a Tamiya kit where you modded the doors to be openable ; )

@BOABModels 6 күн бұрын

Yeah, I needed to add the extras because otherwise it was ridiculously empty.

@Outpost31ModelWorks Ай бұрын

Amazing job at improving a pretty poor kit. Turned out great!

@BOABModels Ай бұрын

Many thanks!

@GTiR23 Ай бұрын

You did a great job on a poor kit, bravo! I wouldn't build it myself, I'd rather stump up the cash for the Tamiya version, although they are so rare now a good one is hard to find.

@BOABModels Ай бұрын

Yeah, I wish Tamiya would reissue it. Thanks for watching

@KGmodels Ай бұрын

Great video,the upgrades you made are really worth the little bit of effort,as this kit looked a bit detail-less in the review,and just to let you know,it says Kir in the title,not kit. ;)

@BOABModels Ай бұрын

Thanks, I appreciate it! Also, title is now changed! Cheers! 😅

@BarricaG Ай бұрын

It's a shame this kit is so poor, as it's such an iconic rally car. Your improvements worked well into turning the kit into an acceptable model, but Heller really should do better from the start. I'm amazed that your homemade decals worked better than the factory ones. Do you think it's a problem with the sheet on your kit, or will all of them be like this? Anyway, congrats on the build!

@BOABModels Ай бұрын

Thanks, Gus. I think part of the decal problem is that they were loose in the box so maybe got bent? But other Heller decals I've had have been much better.