This video would’ve been so helpful if I could seeee!! 😒

This was my first time fitting a radio in a car and I had been struggling all day until I came across your video. Very informative and helpful, especially showing all the parts needed which the stereo’s instructions did not mention and no other videos I could find did either. Thank you so much, too content!

Fkn hell mate use a flashlight

Great Vid thanks, can you advise about the Menu set up , or do you have to get a head unit that is compatible.?

So I'm gonna install a double din into my parent's 207cc, parts are ordered thanks to this video. Only thing different is that I'm using a Connects2 adaptor with an aerial and can interface built in. Saves me the hassle of multiple adaptors and ignition live leads. Only question I'm stuck with is about the possibility to place the old radio and tray back after cutting those tabs. Is it possible without the thing becoming too wobbly?

need some light?

Thank you so much!

Only the staring commander is not there 😉... But This is wonderful information. Many thanx from the Netherlands 😜

Nice Video. Does following this (Literally the radio I just bought) mean I could use the steering volume/track controls or do i need a different harness/adaptor? Thanks.

Thank you for this video! Im about to buy my first car peugeot 207 (2009). I am not a car person myself but want to get a double din radio / sat nav / Parking Assistance installed. Was wondering where to buy the unit? and if any local garage would be able to fit the unit. with the Parking Assistance camera. Thanks!

Having a bit of trouble in regards to the dimmer wire after fitting the radio into my 207. There doesn’t seem to be a dimmer wire that attaches into the ISO harness? What colour wire would it be on the vehicle end and what colour wire do I need to tag it onto on the radio side???

Whats the maximun cm to the radio to fit in?. How many inches does that screen have. I will like to install in the same car model an apple car conpatible model but all the ones i've seen in the internet a too big for the measurements I did. Thanks for your time

Hi PJ, I am assuming the existing headunit wiring already has an Ignition controlled switched +, so why is an additional one required to fit the Doubledin screen? Thanks

you should film this on the day

Thank you for the viideo. Wondering if you could help me with some advise. Got a Peugeot 207cc. 2007 model. Could you provide a product list so that i could attempt this instalation.

Hello really helpful vid especially the power cable and where the fuses are. On my setup I also have an illumination cable (orange) but my harness dose not have a matching cable to connect it to, any idea where I connect this cable ?

Hey, I got a aftermarket stereo about 1 week, worked fine until yesterday It just keeps turning off and car beeps 3 times then turns back on for about 1 minute then turns off again

Hi PJ, Can the fuse box live red cable be connected through the original quadlock red-red/red-yellow, or does it have to be connected with a fused spur like you did on the video? I wired my head unit through the quadlock, however, I am having a problem with all the apps resetting every time I turn off the car. Thanks in advance.

Do you have a list of the all the things you need i.e radio and electrical connectors needed please as I've just bought a 207 and would love that exact stereo !! Many thanks mal 👍

The original radio controls the board computer. Does that still work with a new double din radio installed?

My ISO connector did not come with the red wire, my new radio does have a screen with it, is this going to be a problem?

Nice vide explaining the instalation but two comments below stated there will be a problem with the central screen which is just above the vents which shows your cars stats (mpg, range and so on) as well as date time and morte. Removing original radio will prevent you from making any changes if needed to date time and all other setings. UNLESS the new 2din radio somehow does control this? Also, does the control stork by the steering wheel still work with the new unit?

Hey! How do you know which speaker cable is positive and which one is negative? I'm going to connect after market speakers to the already mounted original cables from the car, but they all have different colors and they show the same voltage when tested with multimeter even though one (of the two cables per speaker placement) should be negative or earth. My after market speakers have a + and - connection, so I know the actual speakers polarity but not the cables in the doors. On the Peugeot original speakers they are just labeled as 1 and 2..

Hi, this is useful as I am trying to install an android head unit for my Peugeot 207cc. Do you mind sharing the ISO Harness Adapter and antenna adapter brand and the website link to purchase them? By the way, I am from outside UK i.e. from Malaysia.

The dude talking in this video sounds a lot like F1 driver Lando Norris... 😂😂

In Denmark you can ride around using any multimedia screen if its permanently attached

What's the radio you used?

I hope i can do this in dayligth instead in the dark 😏.

And now you will be unable to change the time and date on the screen in centre of the dash which is why I watched the video in the first place! U will need a connects2 box to connect the steering wheel stalk controls to the stereo,

Hi, I've installed everything as mentioned in the video, but I didn't get any red cable to connect at the fuse box. The problem is that the radio doesn't switch on, I've tried in another car and it does work. What should i do? Thank you

Excellent video 👍

Il video è molto scuro..buio

Hi, useful video however very hard to watch as you filmed at night. Ps everybody makes the same mistake. The fuse spur. You can plug it in two ways. One way your accessory is not fused and in danger or burning out the wiring however unlikely that is but that’s the point of fuses. You should check which side of the fuse box is live with a meter.

I peugot 207 what is the size area for the screen radio that I need?

What’s the dimension of the Peugeot radio. Cos I want to get a 1 din radio and I want it to fit perfectly

Why you did this video in dark???

Very video, cant even see what you are doing mate.

Hi can you do pls for me is well how much you charge ?

Hey mate. When i cut the plastic things off, is it possible to put in the original 1-din radio later? I hate it to cut in my car, but i buyed a new radio

Do you have a workshop in North Island?

Comment savoir le prix

What about canbus installs ? Great video thoe 😁

What is the measure of the metal cage?

The iso harness I’ve purchased is the same as the one in the video however there’s no ignition wire?

whyyyy???

Too dark, could not see anything

Good video but can't see shit!

Non si vede na mazza !!

Can,t you make a new video ? this is so dark you see not muts at all what you are doing its to dark mate

Why didn't you just do it when it was light? No point watching this at all

Mann sieht gar nichts.. sehr dunkel...