Phanteks D30-120 Cooling FAN - Up Close Look

Phanteks D30-120 Cooling FAN - Up Close Look - I'm a fan of this FAN.

Рет қаралды 8,726

Күн бұрын

Take a close look at the Phanteks D30-120 Cooling fan. This video a an overview of the 3 fan kit and how it assembles and the basic specs of this fan.
I also discuss the "NOT INCLUDED" rgb controller from Phanteks. These fans use standard PWM and ARGB connections that give you a wide range of control possibilities. There is no specific software needed to control them.
The kit includes 2 CABLE pieces so that you don't have to use all 3 of them together. You could seperate them into 2 on one cable, and the other controlling the remaining fan.
Check out these FANS and the controller using the following Amazon Affiliate Link, using these does benefit the channel at no cost to you, a huge thank you if you choose to use them!
D30-120 3 Fan Kit - Regular Blade - (White) - amzn.to/3rcKNSM
D30-120 3 Fan Kit - Regular Blade - (Black) - amzn.to/483HuhD
(Make sure to select the correct fan type, reverse, or regular on the amazon page)
Phanteks RGB Controller - amzn.to/467usxy
Check out My Amazon store for more products I recommend and use
www.amazon.com/shop/hardwarea...
Chapter List:
00:00 - D30-120 Intro
00:06 - How to Connect
02:39 - Reverse Blades
03:24 - SPECS
05:04 - Control/Cables
05:49 - Mounting/Screw Covers
06:55 - Rear of Fan
07:21 - Phanteks RGB Controller
08:59 - RGB and Cabling
10:15 - Price
10:41 - Conclusion
As always, Have Fun and thanks for watching!!!

Пікірлер: 20

@rdp6096 9 ай бұрын

what drew me to these was the reverse fans. Thanks for the close up!

@Shaka215x 9 ай бұрын

Awesome video! Thanks for making it. I'll look into your feedback when I go to swap out my current fans. I like the white and silver look. Currently rocking 11 of the Corsair SP fans with the 22 cables that goes a long with it. I'm pretty sure I'm not going with Corsair again in the future even with the new link system they have. I appreciate the time you took to film this.

@HardwareArtisan 9 ай бұрын

Thanks for your feedback Shaka215x!! I do like the Corsair system, even with 22 cables, but that is getting old dealing with that, and there are quite a number of options now for modular fans. I do like the look of these Phanteks fans and that you have lots of control options. Sounds like you have an awesome build!!! Have fun and thanks for the support!!

@deviantbuilds 9 ай бұрын

If i didn't have dozens and dozens of fans already, i would be using their t30s and d30s in all my builds.

@alex8san 9 ай бұрын

Loved the video very informative !! What corsair controller would you recommend I'm using 6 of them on my first pc ever and Idk which controller to use for these fans

@Arachnoid_of_the_underverse 9 ай бұрын

Nice looking kit it would look great in a completely white installation.

@HardwareArtisan 9 ай бұрын

I agree with that!! It's a good looking fan IMO. Have fun and thanks for watching!!!

@thomasjakobsen2019 8 ай бұрын

@@HardwareArtisan Can these fans output complete pure white from the LED's? Or do they end up with a blue tint

@kevinbridle1831 5 ай бұрын

I just put five in my NV5 case, easy peasy, anybody that breaks the fittings is an idiot, take a deep breath and actually look at the shapes of the corner pieces, the rectangular tab fits the rectangular slot, if you can put Lego together you can do this without mishap.. Great Fans.

@danielandersen9644 9 ай бұрын

Can you connect an additional single fan to the trio like with Lian Li's unifan setup?

@gsi16 7 ай бұрын

yes, output end of trio with a M to M pwm extension cable goes to the input of the single fan (or a pwm Y 2 way splitter cable). Not out of the box solution , but it could be done

@SpawnOfBlackie Ай бұрын

If I buy the 3 fan kit I can just connect 2 of them and keep the 3rd one as a spare, right?

@HardwareArtisan Ай бұрын

Hi SpawnOfBlackie, you are correct, you don't have to use all 3 together, 2 together is fine with a spare on shelf. Great question! Thanks for watching!!!

@Exlisticc 8 ай бұрын

Hello for the D30 fans, what program is the one with which you control everything.

@HardwareArtisan 8 ай бұрын

Hi @Exlisticc, that's a great question, there is no specific software you need for the D30-120 Fans. These don't have a controller included, these have a 3 pin 5v ARGB connector and are intended to connect to your motherboard's ARGB header. You would then use your motherboards RGB software to control that header, in turn controlling the lighting on the fan. The Phanteks controller demonstrated is a standalone controller with buttons and doesn't require software to function. There are other ways to connect these fans of course, you could adapt them into corsair and use iCUE to control them for example. Let me know if I can help, thanks for watching!!!

@Damir_Turk 4 ай бұрын

@@HardwareArtisan question can you connect this fans to 7900xtx nitro + with both 3 and 4 pin on the card itself to regulate speed and rgb_

@Black_SwanNL 5 ай бұрын

Still looking if this tripple pack can be split up. In my case 1x120 en 2x120. And if they can then still be linked up. I want 2x120 in the top of my pc and 1x120 in the back. That is why i'm asking/searching.

@whatulookingat 3 ай бұрын

Im looking for the answer to this too, did you happen to find a solution? Any help appreciatrd. Thanks.

@Black_SwanNL 3 ай бұрын

@@whatulookingat Sadly no.

@animalyze7120 20 күн бұрын

These cost the same as Thermaltakes EX120 Swafan 3 pack which come with built in reverse blade customization ability and no plastic joiners to break. If these fans for a 3 pk were in the $50 range which about what they are worth in terms of quality and performance they would be the new budget king fan. $90 for these in a 3pk is just not worth it seeing as Lian Li Unifans and Thermaltake Swafans cost the same. Great try Phanteks Fans are nice but way overpriced for the market they are in.