It's all about how the cables (ropes in my case) are done. You got 2 sets of cables, ine takes it up and down when it is over the stage, the other drags it out over the audience, once over the audience, that same one takes it up to the roof. when it crashes, it is made to rest at an angle and look crumpled

As an Art Major, I commend you! This is absolutely stunning work! :D

This is so beautiful!! I love it!!

This is AMAZING!!!!!!!

your Time and effort Shows, Masterpiece. Outstanding work.

basically, from alot of pics from the net and from the brochures you get at the show. Then I scan them and trace around the edges of the statues and other things, then cut out a piece of plastic on a lazer engraver (at work), print out the photo of the statues and stick them onto the plastic cut out. The easier way would just be to print the photos onto card and cut with a knife once you have reduced them to the correct size

After all these years, I still want this. Wonder if any more was done to it, or if.it still exists

there is also a 'head' that pops out the arch in the back with velcro. the cloak is attached to that so it looks like he is still under it.

Magnificent

Ok! Thank u!

I don't have any drawings about the throne, but I was shown once how it is done. There is a lever in one of the arms that makes the seat and back slide back and down. the part behind the phantom's feet opens and when he is inside it springs back shut. there is a piece of fabric that is pulled down from the top to make the new 'chair back' and one pulled accross his lap to make the new 'seat'.

I loved it!!!!! btw where did you got the music???

I love your model! I love how you pay attention to detail, it really makes it unique and accurate. I'm trying to build my own theatre model similar to yours. What kind of wood/material do you use for the floor of the stage and where might i find this material? I'd also love it if you could email me any pictures of the cutouts you use (angle, procenium design, etc.) .

PLEASE PLEASE PLEASE can you film an update from your current model theatre with the lighting??? I follow you on tumbler and it looks amazing!!! ❤️

Yup, those are circles that represent where the flames would shoot out

that should be interesting, I cant figure out how to get curtains to work when they are this small. I may have to end up just drawing them on card like in the original models

the main 'rings/hoops/circles' are made from plexiglass/perspex so they are strong and light and i can cut them out at work. the gold bits are lazer cut plastic. the tiny beads are those small clear beads you can get from craft stores, they are a pain because you have to string them one at a time on thread. and the 'bulbs' are just cheap fake 'pearl' beads stuck on bent paperclips sprayed gold

amazing

i just took photos and printed several of them on card, then cut out each figure and layered them so that they have depth

Your videos are really cool! And does anybody know where to get those instrumental POTO tunes?

finally got around to building my model. I'd love some pics of the procenium design. k m fleig 25 AT sbc global DOT net.

thanks for the comments, send me your email address and I will send you some stuff. The 'building' is just those half inch square dowells you can get at most hardware stores and the base of the stage is a piece of ply wood with a hole cut out directly under the action part of the stage because I was planning to have actual traps. the shiny black stage floor is a kind of plastic, where I work we make signs and it is a plastic basically used for that that can be bent and cut easily,

well done it looks amazing. Take a look at my legally blonde set. I'm currently working on Mary Poppins

where did you find the image for the angel stature? i have looked everywhere and i cannot find that image. PLEASE HELP!!

Ok cool because I got a plan that I created for real curtains with a pulley I made up based on my knowledge of the curtains because I'll hopefully be on the fly crew next year.... So If I make it I'll send you the prototype pictures

Where did you get the instrumental track of the "Hannibal Rehearsal" track??

Where did you get the angels?!?! I really want 2 make a model as well!!

how did you make the whole model plus the chandelier

Can u make a video on how to make this model

I’ll pay so much money to buy this model, seriously

Would you be able to share the orchestral track you have?

where do you get the orchestral music? its awesome!

Will you put scans of everything on a site so people can make paper models?

Hi, I hope you are well. My name is Vittor and I'm from Brazil. I just discovered his channel and I'm a big fan of Phantom of the Opera. Your mockup of the show is really sensational. Congratulations! However, while watching your videos, I noticed that you use amazing track accompaniment. It's the same as the original and it looks like you have all the songs. Is it possible for you to send me these tracks? If yes, how can we do it? I would be very grateful if you could send it to me. Congratulations again for the excellent work.

How long did it take you to make that model

@acetatode It was posted a couple months ago by SuperDecke, but was deleted by AMA. Tragic.

PLEASE do that for WICKED

this will be long so bare with me. All you need is a good pic of the statues, they are all over the place, but if needed I can email you what I used. In my case I just blow up the pics, print them out several times, cur out each figure seperately, cut out some thick plastic and paste the printout of the statue on it. then put them back together with some more bits of plastic to space them out so they look somewhat 3D. The easiest thing to do if youre going to make one that is smaller is just to

Excellent!!! By the way, where did you find the music (instrumental version)?, I've been looking for the instrumental version of Hannibal and Prima Donna and I never could find them.

Hi there I absolutely love you model and I’m interested in trying to make my own I was wondering if you could help as I don’t know where to find all the print outs.

Sorry, another question. What is your chandelier made of?

yup, that's the Danish production

Could you maybe send me the pictures you used to make the angels?

Where and how did you get those cutout statues such as the angel and other things such as the lyres

And how to make the chandelier magazine

How did you get the statues so big

that is a TINY stage at 4:03

Could you tell me where I can buy the shiny black plastic or whatever material it is for the floor of the stage? I've looked at a few places but I can't find anything like it

Of coarse I'll need a very fine cloth to mimick the real thing so..... I think silk?

Where did u get the printouts

so if Meg sat on the throne she would be in his lap.

What's the size of the stage front? (meaning the opening size)

KZfaq doesnt let me post my email address for some reason

@Monkeyballmania HEY DONT I KNOW YOU AGAIN??

Ie. length and height

Could you put on a how to make this or put it as a coment PLEASE

@Monkeyballmania J00 STALKAR!!!!

@noah041897 about 18 wide and 12 high, inches

print the pics out on some heavy card and cut them out one time rather than sticking them onto plastic.

is the model for sale? justin downey

All of my money.

Code

Can you give me the hyperlink/ HTML

i'll need am email to send you the files

will have to email you the pics, so PM me your email address. No the lyres on the chandelier are different.

Im sure you get this Alot. but i have some Free time lately and I'm interested in making my own model, can you please, e mail me the angel art for the proscenium arch and chandelier trims? ill send you my E Mail

send me your email address