As someone who bought this after watching the first review and has no clue really where to start, a complete beginners guide on how to do the first run and really get in depth would be awesome

Great video! I have heard a lot of people talk about them and it’s nice to see someone take the time to show it off. Keep up the good work.

Its good to see somebody do a more in depth video on these stills.

Awesome video great camera angles and lighting you can see everything!

Thanks for the coupon code, I just ordered one using it. Cheers.

I got one brand new in the box for $30 at a flea market. Can’t wait to make my first run when I get home from my honeymoon

I bought this. There are no instructions on how to put it together, so I found your video helpful. Thanks!

You don't NEED the Tape if you use the Silicone Washers, They work really well....BUT they are very easy to forget about and fall out (and get LOST) when you disconnect them

Just got 135 proof off my first run in the 8 gallon still

Thanks buddy. Very nicely done instruction video

Got one made by someone else, after the vinegar run I had rust spots in the bottom from crappy weld that I guess had a hole it it before.....went straight to the trash. May give vevor a try. Another good reason for a first cleaning run

A really great review mate. Thanks for the info.. you presented & explained step by step very well. You need to do more reviews or recipes for us. Really like your no fuss, this is how you do it review. No BS.. 👍

This is been exactly what I’m looking for in my decision to get a two or three pot still, a three pot it is

Good video. Thank you for the info. 👍🏻

I would like to see your guys take on the digiboil distilling setup or changes you guys could offer for it .

I have an older version of this still. It suits my needs until I get the time to build something better. I've never had an issue with it. I double distill everything now and I am happy with the results.

Awesome thanks!

Lookin good ..id be happy to give that a go

I didn't use no Teflon tape an I still didn't have any leaks,I run mine on a single burner hot plate!!

Subbed out the original coil and pot for a longer one and made a bigger cooling pot. Didn’t cost much to upgrade. Definitely helpful

I love all my VEVOR products so far.

I’m using this set up , the only thing I differently is filtering the distilled liquid into a funil with cotton , it comes out clean as into a glass parrot with an alcohol meter float .

Thats a really good review Big Eaze.

Cool little still

I have this still, and I want to upgrade. Need to find a 10 to 15 gallon pot with a locking lid and use the 5 gallon pot for my thumper and make a bigger worm bucket... condenser

Thanks for the video ,excellent. Do Vevor supply beginners instructions and recipes.

I have the 3 gallon i love it

I have an 8 gallon Vevor rig that is great for smaller/testing ideas runs, it wasn't expensive but it's not cheaply made and makes some decent shine. I'm interested in what improvement(s) you guys have in mind! p.s. Just read the comments and a jar thumper is something I was debating making. Also, I use copper mesh tucked into both ends of the tube to the thumper or the worm if not using the thumper.

Well thanks for the review, I always wanted to get into this and now I'm retired I am going to. I know nothing about what I'm doing so any advice would be appreciated.

G'day Philbilly, Mate I loved your video. Bought one of these contraptions and was delivered yesterday. I think it's awesome. Loved your idea for sealing with teflon. Looking forward to using it. I'm sure I'll stuff up some mixes but willing to give it a go and trial different blends. Loved your easy, clear style of tuition man. Great stuff. Thanks again from Keiran in Melbourne Australia. You are a gun mate. Keep up the great work. Video was so helpful. Cheers 👍👍👍

is there a video of starting..i just wanna make distilled water right now, but im still trying to figure out the vinegar run..just need to know how not to blow myself up! lol..thanks in advance

Excelente explicación, acabo de comprar uno,me estoy iniciando en este arte , saludo y gracias, desde Panamá.

copper mesh for the thumper?

Remember the burrito wuine video? lol. Great to see you guys doing so well!

Excellent video brother I could have a drink with PhilBilly any day

Man... I have the same .but when I start it- the "pot" start dancing on an electric stove...what can be a solution?(

Could someone tell me what the function of the knock barrel is?

Great Video thanks! Bait and Switch.... over $120 now.

Doesnt leak even without the tape but like i said below , i worry about the thumper being way to smsll

How about clining the stil before you start destilling ??

Do any of the parts in this kind of system wear out fast? Like would you want spare parts for those if any on hand if you were thinking long term? And if you just wanted to use it for purifying water, is there an ideal heat setting? Or would does it matter or better to just do max heat?

So I got a question I got the same one it is 13 and 1/2 gal so how much four shots and heads will I be thrown away total

i would like to see how you can get etheric oils from fruit etc

I'm buying the 13.2 gallon version next week!

Just asking how long does it to take to run?

Is it legal to make brandy at home?

You put the tape on backwards the second fitting couldn’t help but notice lol

I just got a 8 gallon vevor still. We ran it a couple of times but only got 2 pints of shine. We had a 5 gallon mash. Can you help us out and let us know what we are doing wrong? We should be getting a better yield.

Good one ☝🏻

Kind of alarmed by the brass fittings, I would swap them out for copper

Hi there, for a beginner did you suggest that one or the other style with the thumper jar ( Vevor Model VV-PG30L-220V ) - means which one in longer duration is more modern/efficient/professional/comfortable/flexible from your point of view ? Many thx. in advance for your experienced reply, suggestion & help- greats from germany ;)

Isn't there a plastic in that bending metal tube?

The issue I'm have is finding new gaskets for the pot and for the thumper/slobber box. I found the gaskets for the pipes. I contacted them and they said they DO NOT carry parts for any of the still kits. So now going to have to re pipe everything and go to mason jar thumper.

I tried to use the promotion coupon code. They have it blocked out on the website. I guess I will a still elsewhere.

You recirculate the water, add ice to your container to keep it all cool.

Dude great Vid. I have on of that little suckers too what so ever I just wonder what did u put in the Booster ?

What are your thoughts on adding some copper mesh in the stainless tube going from the boiler to the thumper??? I bought it using the PhilBilly Code!!

You might want to swap out the fittings with stainless steel because some have tested the fittings and found lead in it.

Question. Did a practice run of a a gallon of boxed wine, threw the heads out. The run gave me about 2 cups of liquor. Did a second run on the liquor I got out of the first, but was wondering if I need to throw the heads out of the second run as well?

Hey Eaze, my mom just bought me one of these for xmas, Ima put tails and a couple oz of california kind bud in the thumper ok?

Teflon tape compression fitting?

What temp did you hold on the thermostat on the lid while you was running. I'm curious to what temp I held at and what everyone one else did

wanting to get a first still for my dad...would you recommend this or the football style? Both are same price right now for 5-8 gallon. He is only going to do peach and pear brandy with it. thanks

Love this channel fellas. Been watching for a while and think I'm ready to start diving into it myself. How do I enter the giveaway?

First like and comment here. Make a jar thumper set up for one of these like you did the football still. I’d buy one from you guys!

Thanks for sharing this!

I always thought the thumper was too small on those units mabey i was wrong ,am i ?

Propane is way too hot for a small pot like that. Is tap water so expensive or why the F people fiddle with those small pumps and end up circulating warm water?

I love my 5 gallon. Added a mason jar thumper, and infuse some good flavors. I do wish the company made a replacement parts package. I could use new washers and hoses, but not sure what to order for it.

it is 112$ now in january 2023...

Just picked up one that was 130ish, and claimed to be 13.2 gallon... looks like everything else is the same.

How long does it take from start to finish? Not counting the fermentation, just the distilling time?

How to know when I'm about to get the tails with 5 gallon pot

I applaud the fact that you video has a runtime of 13:13. Probable accidental, but totally awesome if you in fact crafted it that way....

Can’t see where the water inlets and outlets go, and which one is the pump on?

what material is the still made of? Is it induction compatible?

What gauge is the Teflon tape for the parts??

i just bought that for $165 not bad but not great

What would you change as mentioned?

Isnt it important to cline the stil before you start use ir? ???

Hey its waylon momma the one who won the still, just leaving a comment I don't have Facebook

I purchase the larger still and it does have the thumper but how deep do you put something in the thumper does it go over the hoses I have a complete beginner I watched my grandfather when I was a child but I was more interested in getting into trouble then watching him and the little pump for the water flow it is a submersible pump right

It would be helpful to know how long from fire to finish…?

How do other spirituous liquors get their amber color?

I'm really getting interested in stilling some liquor. How hot are you running this thing? Also, about how long and when do you know when your tails are done?

If you use a glass top oven. What temp do you set the stove on?

How do you know when the methanol is burnt off

I have this, but it is a 50 litre, so does that mean if I run it to capacity, would I need to take the first one and quarter litre as my heads

I. Gotta get. Me. One

The threads on this are straight threads, not NPT taper threads. They don't need teflon tape, as all the threads do is pull the flare on the tube firmly so the flare seats against the cone of the fitting. It makes a metal to metal joint- no sealant is required.

How do u make mash to start out on and can you give me step by step for my first run ever thanks

So you don’t need a combination of hot and ice called water in that pump pot of water?

Think beer kegs have pressure relief valves built in or easy to fit . Home made one .heard they can go off like rockets 🚀 with out a pressure relief valve. Around $35 dollars second hand 50 litres .

How long ya think this would take to distill a gallon of water

Awesome demonstration

Thanks for the great video! Unfortunately, the code has expired. Might Vevor be willing to give you a new code for us to use that doesn’t expire after a month? Thanks again!

I’ve been making wine for nearly 35 years. Can I use wine to make shine?

And here I thought a slobber box was one of those girls in the bar that’d vanish with a guy and come back 15 later to do it again.

What use for mash

Use F4 or Mil-Spec tape instead!!