Thanks for the video, very useful! I was cleaning the inside component once a month, but from the video i learned that i should do it on a weekly basis. But what is different in my manual, it tells me to lubricate the machine every two months. You should check this, because if you use the tablets every month you should lubricate more often then 6 months. I have a Phillips 1200 series. Thanks again, wish you all the best.
@real_synthaxАй бұрын
You don't lubricate anything that comes into contact with coffee, so the oil remover tablets aren't going to affect lubrication in any way.
@movealong1593 жыл бұрын
Philips should hire you for instruction videos, you done perfectly as they are truly bad at it
@mnicole92 Жыл бұрын
Thank you! I dogsit for people with this machine and they’ll be so grateful I’m learning how to take care of it ha
@TheBaturm3 жыл бұрын
Nice video. Very useful.
@annawojtowicz39482 жыл бұрын
Thanks for the video. Question after inserting the oil removing turning the machine back on and brewing several cups to rinse the machine the water is still not coming out clear… does anyone have this problem?
@ileneenglish22312 жыл бұрын
You have explained where the cleaning tablets go. No other instructions have done that and I have been looking! Thank you! Question: where is the filter that you will need to change? I see just a little white thing in the water holder. Is that the filter that you would change out? Thanks.
@WomanLoveLiveLaugh3 жыл бұрын
Hey! I have a question or I should like to request that you contribute to show us how you do the calc and clean, I do it now the first time, but I'm a little bit unsettled, So can you do it? :)
@Kalle1995 Жыл бұрын
Beautiful video thank you😊
@teresashaw74002 жыл бұрын
My coffee makers light on aqua clean is on. We use filtered Water. How do I make this light go off?
@bijhua2 жыл бұрын
Do you lubricate the group after each weekly cleaning?
@cavallinorampante762 жыл бұрын
Hello, please could you help me to understand why my brew unit is so hard to be removed from the machine? Thanks in advance!
@gabeanderson2813 Жыл бұрын
Nice one, man! I am using EP2220. Do you know why the pre-ground coffee doesn't brew? Just getting water all the time. Finished decal and cleaning. All else works except grounds. Appreciate your answer!
@Crookymonsta13 жыл бұрын
Hi thanks for the vid! Umm, How do you know you've hit 5000 cups?
@marcosjaime72492 жыл бұрын
Where I can buy the tablet, on amazon it is not available and in my country either. Thank you
@melissamalpica75393 ай бұрын
Thanks for the video- I have this same machine and my Frother is not frothing. I did the CalcClean reccomended in the manual, cleaned full system but milk is coming out flat, no froth. Any guidance in how to solve? Thank you 🙏🏽
@natassabithoulka933210 ай бұрын
Hi I've just bought this machine and I'm using espresso not the beans. It made one espresso OK then the next ones have all been weak or just water. Am I doing something wrong. Any help much appreciated 😁
@henghfoongАй бұрын
What degreaser did you use and how did you do it? Having the same issues of coffee grind gunk stuck on the brew head.
@sophiegerday46152 жыл бұрын
Hello, Very interesting video! Thank you very much! When we put the aquaclean capsule, it floats and does not hold in the bottom despite having let the bubbles come out as much as possible. How do we make the cartridge stay in the bottom? Thank you beforehand.
@mnicole92 Жыл бұрын
Did you ever figure it out!?
@lmpstlouis2 ай бұрын
I have done maintenance and coffee is watery and sludge. No pucks. I have had a long time and used to get nice dry pucks
@swamivandermerwe2 жыл бұрын
Th grinder doesnt get cleaned, as the tablet goes into the tamper and basket only, the beans are still sitting in the grinder...this doesnt make sense, how does the actual burr/ceramic grinder actually get cleaned then? it only cleans the basket and tamper.
@CosminMiron4 жыл бұрын
Hi John, nice videos and very thoughtfull of you helping others... I just received my EP 2221/40... I maded like 10 espresso with setting1 on the grinder, at lowest temperature setting from custom settings, but still it seems that i don't get that foam (cream) that it's shown on many videos that I've watched... What could be the cause?! It's about the coffee?! I use Julius Meinl Prasident for automatic machines.... I just don't get it... How could I get the most crema from my coffee?!
@JohnJacob4 жыл бұрын
I realized that old coffee doesn't produce good crema... Try a different bean and see if that does it... Also, how does the coffee taste when you make it?
@CosminMiron4 жыл бұрын
@@JohnJacob the beans i'm using right now are from 05.20... and the taste is fine, it has a good aroma.... Maybe i'm too picky about it... Thx 4 answering and hope to see more of your content!
@JohnJacob4 жыл бұрын
Try setting the machine to grind setting #2 and see if that helps. If it doesn't help then it's the beans... It's possible that grind setting #1 is too fine of a grind that you're machine is struggling to push water through the coffee Puck... I had another person on one of my other videos that had that issue and the changed it to #2 and it worked. I hope this helps!
@CosminMiron4 жыл бұрын
@@JohnJacob Funny thing is that the machine isn'y struggling to push the water, the flow of the brewed coffee is ok and constant... maybe later, when i'll change the coffee beans it'll surprise me with the outcoming crema.... I also checked the residual puck and it's firm and not broken when it's dumped in the recipient.... After all, i'm happy with the machine and can't wait to dial in more coffee types and tastes...
@JohnJacob4 жыл бұрын
That's awesome... I have a coffee subscription and I get a different bag of coffee every 2 weeks from around the country... It's called drinktrade.Com it works here in the US.
@marahzabalawi90012 жыл бұрын
Thanks alot.. tip : don't unplug the machine just press the pause button
@souvial87932 жыл бұрын
Hi, thanks for the video, I am facing a problem… coffee is not coming out anymore! I cleaned it totally but suddenly it stopped pouring coffee but hot water is ok… any idea?
@marahadjan Жыл бұрын
You probably solved it by now. But its probably a red O-ring inside the machine that is broken. Happened twice for me. Take out the brewing group and check inside. There is a nozzle screwed in with two size 10 hexagon socket if i remember correctly. Take out the nozzle and check the middle red O-ring. It's size 9x2mm in size. Try change it and lubricate the oring.
@costelmirceaphotographer44813 жыл бұрын
Hello My espresso machine displays all 3 LEDs on the right. I cleaned, decalcified and greased the espresso machine, but I still haven't solved the problem. The filter is barely changed. What do you suggest I do?
@daviddemafate64293 жыл бұрын
Same for me. Did you find what to do ?
@cedeking38553 жыл бұрын
Me too, really annoying
@THeMuLtiLiTo3 жыл бұрын
Did you solve the problem?
@cedeking38553 жыл бұрын
@@THeMuLtiLiTo nope, fortunately i was in time to get it substituted from Amazon after 1 year and a month, 24month guaranteed
@THeMuLtiLiTo3 жыл бұрын
@@cedeking3855 thanks, I think that I should do the same as my machine still under warranty too.
@origanooo4 жыл бұрын
I just buy this machine today.So for the first time using this machine . 1. The manual tells me to fill the water tank to the maximum level and turn on the machine. After i turn on the machine, it rinse the system quite a few water not many droplet and take about 10 second. Is this normal ? 2 . Is your brew group has a dificulty about removing , I push the yellow leaver but it take some time for unlock the brew unit . Thanks in advance .
@JohnJacob4 жыл бұрын
Yes it's normal for the machine to rinse itself out when you turn it on... The brew group is difficult to remove ; you have to wiggle it out.
@origanooo3 жыл бұрын
Sorry to bother you again . I use my machine for a month and I have some issue about the coffee flow from dispensing spout as you can see the coffee flow from left side of the spout not center . (drive.google.com/file/d/12sebpop9F2sFcYdQF2x3nClHkYQ9NjF7/view?usp=drivesdk) But I don’t know that you have this issue or not.
@JohnJacob3 жыл бұрын
@@origanooo have you tried using the coffee oil remover tablets? There might be a small clog.
@origanooo3 жыл бұрын
John Jacob Thanks. I will try that.
@marcosjaime72492 жыл бұрын
aand lubricant (grease) neither
@quinnmorris66553 жыл бұрын
year update? I'm about to pull the trigger at costco, how is the machine holding up a year later?
@JohnJacob3 жыл бұрын
Machine is holding up great...it's been a year and a half since I purchased mine.
@rainashahilazakaria Жыл бұрын
@@JohnJacob hi I use Philips 2200, should i clean the grinder as well? If i should can you show us how to maintenance it? 😀
@JohnJacob Жыл бұрын
@@rainashahilazakaria never had to clean the grinder
@rainashahilazakaria Жыл бұрын
@@JohnJacob oh i see, thank you..
@karniskavva Жыл бұрын
Is it still holding up 2 years later?
@JohnJacob Жыл бұрын
Still have the same machine 3.5 years later... Works great!
@karniskavva Жыл бұрын
@@JohnJacob good to hear!
@JimBobe2 жыл бұрын
Where can i buy the lubricant?
@jameslound94142 жыл бұрын
Amazon 15€
@adisharr3 жыл бұрын
Hi John, my steam suddenly started coming out rather 'aggressively' - mostly making large bubbles causing the milk to bubble out. It also makes a 'glup glup' sound. I've cleaned the hell out of the steam wand, run a ton of hot water through the nozzle, tried with no filter, descailed it (I've only made about 50 lattes on it). Any ideas? basically it's just a good expresso maker now.
@millanmixy3 жыл бұрын
Same happened to me as well... Just after 2 weeks of using the machine, I bought mine a month ago!! I already requested return which sucks because I really like the machine and now I have to ship it back.. I checked everything, tried also hot water, steamed without any milk or water and then tried with milk and didn't work.. This is the only reason I got this machine
@adisharr3 жыл бұрын
@@millanmixy I fixed it! Now this is going to seem stupid but make sure the black plastic insert is sticking out just far enough in the wand so that there are two little tabs that seem to 'lock' it there. That completely fixed my issue. Philips was worthless - they had no idea how to fix this simple problem. Give that a shot and let me know if that worked for you. I send a pic if that's not clear.
@millanmixy3 жыл бұрын
@@adisharr I'm not quite sure what you are talking about.. But there is a small, very small "dot" on the metal steam wand and you can't really see it until you look for it, it's on the upper side.. It was clogged with milk, now it's clean and it's working as good as it was before I think :D
@adisharr3 жыл бұрын
@@millanmixy Hey Milan, I was talking about the hard black plastic piece that is inserted into the metal steam wand (it usually stays in there). That was too far back.
@millanmixy3 жыл бұрын
@@adisharr Oh okay! I understand now, checked mine it's sticking out a little, yep :) Thanks!
@lalafrentz161411 ай бұрын
Can you make an update on how your machine is still working with filtered water I just got this machine and want to know how long it will last if I use filtered water since the instructions says not to lol and I have well water other wise 😂and I’m sure that’s also not what the machine is looking for as in certain toxins to filter 😩since I gathered it’s looking to filter out certain chemicals in tap from the city 🤷🏽♀️
@pogCibi11 ай бұрын
I haven’t cleaned it for 2 years 💀
@maryamsanati2823 жыл бұрын
well you just keep saying i do this and i do that! .... well the question is : HOW? i need to see how its done!
@maryamsanati2823 жыл бұрын
maybe you should have filmed this on a saturday when you are actually cleaning it?
@lindamabry63882 жыл бұрын
@@maryamsanati282 Good idea. I would love to see a video of him actually lubricating the brew mechanism.
@pavloskadiris88212 жыл бұрын
I suggest not to buy this machine. After one year no more steam and coffee comes watery.
@isopod6663 жыл бұрын
What a ridiciocoulus amount of work. Totally not a friendly coffee machine
@MrNunoflash11 ай бұрын
You can use it and do the same maintenance that you do with any other automatic coffee machine. This machine just allows to perform more maintenence that will help the machine lasts longer and makes good coffee, even after making lots of coffee.
@henghfoongАй бұрын
What degreaser did you use and how did you do it? Having the same issues of coffee grind gunk stuck on the brew head.