Dude, you just earned a subscriber, here I was thinking it was a fuel pump, I got the same code that everyone does use 0109 sure enough I pulled fuse 21 and it literally crumbled. I put a brand new fuse in and it fired right up,absolutely amazing
@PhillipBailey5 ай бұрын
Yes those fuse panels are prone to corrosion for sure. Make sure the cover is on correctly. If you're in the Salt belt this is common. Glad it helped you.
@big_watson20155 ай бұрын
@@PhillipBailey Will do, like I said before I appreciate it greatly, I was thinking I was about to have to drop $200 and like hours of work to replace the fuel pump, your lifesaver and yes, I’m in WV and the 214 on it runs perfect though
@hwinsalot38043 ай бұрын
Lucky you!! Just changed the fuse still having the issue.
@PhillipBailey3 ай бұрын
Codes? Was it burnt or corroded? Is your fuel pump not running?
@oceanaikido18614 ай бұрын
Thank you so much! We replaced the fuel pump and then the control module, and nothing. Your video showed me that not only is there a fuel pump fuse (20), but 21 is the fuel system control module fuse, and mine was blown. Never though to check past the actual pump fuse.
@PhillipBailey4 ай бұрын
Glad it helped you out.
@kevinthompson3794 Жыл бұрын
I had a no start today and had to be towed home. I got a U0190 code. I watched your video and went to check the fuse 21 under the hood and sure enough it wouldn't come out, i ended up breaking it up and pulling the pieces out. After i put a new 25 amp fuse and it start perfect. Thank you so much. Saved me hundreds in parts and programming. I can now put this truck back to work tomorrow.
@PhillipBailey Жыл бұрын
You should consider replacing the fuse panel with a new part from GM. Usually there's more than one bad fuse. Be sure the cover is on properly
@itsbeenmacgyvered5916 Жыл бұрын
I am glad that you show your work in real time, as we all get tricked into missing the easy stuff like a bad fuse.
@perron502 Жыл бұрын
Men I appreciate this video help me my truck avalanche 2010 was broke for like 2 months and thanks to you,seeing that you pull fuse out it work for me, I change fuel pump and fuel control module and nothing, until I pull fuses out and it work, thank you God bless you and your fam
@PhillipBailey Жыл бұрын
Glad you figured it out...
@mrgalabama Жыл бұрын
I want to say thank you for your video. It solves my problem with my 2009 Chevy Silverado. I clean my fuel injectors and put everything back together. I only pulled the fuel pump fuse(think fuse 20). Somehow fuse 21(the same one in your video) was missing. I think my roommates were playing a joke on me or something. All I know is I never touch that fuse and it was missing. Once I swiped it out, it started right up.
@USAFMXVET Жыл бұрын
Man…I think I have the same issue on my 2012. Finding this video might have saved me huge… more to come
@kenmalatia40092 жыл бұрын
Got a 2010 Yukon in today, cranks but no start, u0109 code, watched your video and went straight to fuse 21, BINGO!!! corroded and had a huge voltage drop across it. I bypassed the fuse box fuse and installed an inline fuse holder, super THANK YOU!!!, you turned that nightmare into a 25 min job
@PhillipBailey2 жыл бұрын
Glad it helped you out!
@MrTravisAl7 ай бұрын
How did you bypass?
@kenmalatia40097 ай бұрын
@@MrTravisAl this issue happened about a year ago. If I remember right, I just had to go underneath the fuse box and cut off the wire that goes to the fuse then find a wire that was Hot in the Start and Run position and put in line fuse holder to connect to, I do not remember the exact details
@thebaldmechanichardatheari11243 жыл бұрын
Don’t feel bad, you did all the proper checks with the load test on the powers. Always say that doesn’t happen laying on the couch either fixing something or getting beat up on a diagnosis. Good find.
@capitalr86493 жыл бұрын
Always check fuses first. Would of prevented all that work he did.
@cpabrego Жыл бұрын
Great observation on the fuse diagram being incorrect! That as the nugget I was looking for..
@dustydanis22992 жыл бұрын
Lmao thanks alot for posting the video... I bought a 2011 4.8 l with 153xxx, that was sitting for over a yr .. would run when you feed her the gas but that it... went and bought a fuse and then and checked the fuses.. there was the corroded 25 and a 15 changed them both thing started right up and runs perfect best 1250 I ever spent
@user-pb8ok5li6t7 ай бұрын
You’re the man thanks for the video, saving the day for people. Huge props 👍👍👍
@champagneave Жыл бұрын
I have to thank you very much I had the same problem crank no start. Pulled the fuse out one leg was missing jammed in another fuse and on the way I went. Thank you again for posting!!
@PhillipBailey Жыл бұрын
Probably should replace the fuse panel
@spazz45786 Жыл бұрын
thank you so much for this video my 08 escalade had these same issues and this fuse ended up being junk and now it’s fixed 💕
@oldbiker97393 жыл бұрын
I'm sure that customer is more then happy you found the root cause problems , I would be more then happy with your work .
@ranger432721 күн бұрын
this was the EXACT problem I had after the same fixes..... Good ole fuse 21 was corroded. Wish this video was around back then 5 years ago !!
@boygohard13 Жыл бұрын
You're the man!!!! Exactly my problem bud thanks a ton, I had ordered the fscm for almost 200 and the fuse was the issue so don't need it!
@PhillipBailey Жыл бұрын
Glad it helped you.
@stevemazzarella72123 жыл бұрын
It’s not always easy!!!! You did the correct diag..
@dannyzr1214 Жыл бұрын
Same problem for me it ended up being fuse 21 appreciate it man
@williamoates665 Жыл бұрын
GREAT video. Thank you for sharing with us.
@mmullaley2 жыл бұрын
HI Phil. I had the truck down for a day with a crank, no start situation. 2012 Yukon. Didn't hear the fuel pump cut in with key so pretty much knew is was a fuel issue. I have a basic code reader and it said FPCM not communicating....too easy. My buddy is a GM tech, has been for years. He was going to come look at it this am. Anyway.....I keep watching your video and see your run into the fuse box, the mislabeling, and corroded fuse etc....I had the identical issue. Changed the fuse and back on the road. My fuse looked just like the one you pulled. I had spent quite a bit of time fooling with that issue and if it wasn't for your video I'd likely have changed things out as you did initially. Took me hours looking at videos before I found the guru (you) who figured it out. Subsequently, I removed every fuse and sprayed fluid film down each and every port in that fuse box. I undercoat my Yukon XL twice a year and spray up under the fuse box as I knew they had issues with corrosion. I figure this corrosion started right on top of the panel because the rest looked OK. Running down the hwy in winter and reality is that that fuse box isn't sealed. GM needs to do a better job. Thanks for the video.
@PhillipBailey2 жыл бұрын
Glad it helped you. I had another a few days ago. Didn't catch me twice...
@frederickbourassa75165 ай бұрын
Merci sa regler notre problème 🤘🏼
@JOHNTHE8TH1 Жыл бұрын
Thanks. my fuel system fuse F21 was blown. My fuse directory shows a relay in the fuel pump location and a 20 amp fuse in F20 like your example. thanks for the help!
@PhillipBailey Жыл бұрын
Yes the fuse layout depends on what engine the truck uses. Very misleading
@tommyofthehillpeople Жыл бұрын
I will be dang! My 2013 Tahoe started the same thing. Wouldnt start and occasionally stutter. First time it did this it started after a few minutes. Drove it and went to Advance. The worker got his personal tester and found thar code. I didnt replace anything. Just happened this morning. Started up again after a few minutes. I figure it cools off and will then work. I get home and pull that fuse. Sure enough, the fuse is half burned but not blown. There is no corrosion otherwise. Ill be doing s thorough check though. Thanks for this.
@PhillipBailey Жыл бұрын
Ford had a similar issue on the same type of circuit. Fuse terminals are too small for the current they are expected to carry. Glad it helped you.
@joytest3144 Жыл бұрын
Thank You for this informative video Sir.
@PhillipBailey Жыл бұрын
Hope it helped you. Was your fuse corroded?
@donaldisrael71473 жыл бұрын
Thanks for the good bad and ugly. Even great mechs aren't perfect.
@PhillipBailey3 жыл бұрын
Yes we all get caught sooner or later. If I was perfect I'd sell tools or parts...or maybe a politician.
@grabovg3 жыл бұрын
@@PhillipBailey now that’s funny.
@fredyalcantara950 Жыл бұрын
Thanks you help me a lot with this video
@PhillipBailey Жыл бұрын
Glad it helped you
@antoniomarrero829010 ай бұрын
Thank you 🙏
@jimmyramirez57873 ай бұрын
we have a saying in our shop did you KISS it? Keep It Simple Stupid K.I.S.S now the main question, do you give the customer his money back for the shops mistake??? still good video, its how you respond to your mess-up that keeps customers coming back, smart customers understand human error
@PhillipBailey3 ай бұрын
I ended up charging for the parts only. I ate the labour.
@dedotatedwam60013 ай бұрын
just started running into the same issue, changed the fuel pump, then the fuel control module and it wouldn't let me reprogram it, turns out its not powered. feeling super silly wasting money on a fuel pump control module but it is what it is at least I'm not paying labour at a shop... hopefully this fuse box is all it is new fuse fixed it temporarily but problem kept getting worse. i think a weak battery doesn't help either.
@PhillipBailey3 ай бұрын
Yes sometimes we cant see the forest for the trees... I feel your pain, this one caught me too.
@JeremyFowler102719993 ай бұрын
So we have similar problem codes p0230 and U0190 with a 2013 silverado 5.3 replaced fpcm, fp relay, fuel pump, and would always start up fine when it was cooler and overcast but as soon at the sun was shining and heating up it would not start. Did fuel pump command through scanner and test says short to voltage. Also the car drains the battery randomly
@PhillipBailey3 ай бұрын
If you're in the salt area the fuse panels are prone to failure
@JorgeMoreno-zd3vf Жыл бұрын
Thank you 🎉😂
@kuntryboi8675 ай бұрын
I have a 2010 suburban with the 5.3 vortec and I've checked fuses 4, 5, 12, 21, and 56 with a test light and put a fuse and relay in the same spots that were missing in the video. I also installed a Pre programmed Fuel sending module under the vehicle and installed a new fuel pump and still nothing. I also jumped the wiring harness going to the FCSM and the pump came on. I'm lost. ECM? BCM?🤷🏽♂️🤷🏽♂️🤷🏽♂️🤦🏽♂️
@PhillipBailey5 ай бұрын
Do you have any codes in the PCM or FPCM? You may have a network issue. Can a scan tool pull codes and data from the FPCM?
@kuntryboi8675 ай бұрын
I used a obd scanner an no codes came up at all. Would the fcsm need to be programmed regardless in order to run the fuel pump?
@PhillipBailey5 ай бұрын
@kuntryboi867 you need a better scanner to scan the network modules. No it should be plug and play.
@kuntryboi8675 ай бұрын
@@PhillipBailey Ok, will do. Thank you for all your help.
@mikeunger11012 жыл бұрын
You just saved my ass
@UrbanXExplorer Жыл бұрын
Ok this what my neighbor done..he recently buoght a 2011 gmc kingcab truck, the guy he got it from was rear ended and therefore took bed off but it's set for bout 4 months abd guy told him he drove it awhile after reck then parked it then wouldn't fire up. So..my friend got brand new feul pump, it's cranking but no start. He checked feul pump by hooking to battery to see if pump works and it did. So..he's checked brain box, all fuses, still nothing but..I don't know if he checked pump relay switch to reset it. But this where we are..
@PhillipBailey Жыл бұрын
Look at the fuel pump driver module which is mounted above the spare tire. They tended to corrode and if box was off its quite exposed to rain etc.
@comaradeleeАй бұрын
is the fusebox non repairable? have you tried opening it?
@PhillipBaileyАй бұрын
@comaradelee it is usually not repairable but it can be taken apart
@donaldcouture8458 Жыл бұрын
I have a 2009 Silverado and it was running fine but then died on me. Before I did anything I always check fuses but the same thing on my truck, the relay and fuse are not where it says it is suppose to be. Would you be able to tell me where else to look or what to do next? I dont hear the fuel pump kicking on so I assume it is the module but im not sure how else to confirm.
@PhillipBailey Жыл бұрын
If it has the fuel pump driver there is no fuel pump relay. You need to start with a network scan of all controllers. Make sure you have communication with the PCM, BCM, FPDM. Does the MIL illuminate with the key on? Does the tach indicate RPM while cranking? Check for spark at a couple plugs, check the fuel pump driver for corrosion. Command tge fuel pump on with a scanner and tap on the fuel tank. Good luck...
@elmiewho29 Жыл бұрын
How much was the new fuse box from the dealership? Great video
@PhillipBailey Жыл бұрын
Around 250 cdn
@grabovg3 жыл бұрын
Man that is crazy. It’s sucks when we get burnt. I’m interested in known how the customer took the news and how you handled the situation if 3 repairs for the same complaint?
@PhillipBailey3 жыл бұрын
Customer was awesome! I charged my cost on the fuse panel and no labour.
@h.a.b541510 ай бұрын
Hello, I received the code U0109-00, but the car is running normally. I reprogrammed it, but it did not work, and I noticed an increase in gasoline consumption. Note that I disconnected the ABS socket due to a malfunction in it. Is it related to the code?
@PhillipBailey10 ай бұрын
Yes the network can bus runs through the ABS controller. The Fuel pump driver is downstream of the ABS
@richardruiz2383 Жыл бұрын
I just checked my fuses because I’m having some hard starts in morings my 12 Silverado cranks but sputters for a couple seconds but I noticed the fuel pump fuse and relay did not have anything in them , found that odd ???
@PhillipBailey Жыл бұрын
What engine does the truck have?
@richardruiz2383 Жыл бұрын
@@PhillipBailey 5.3 l lc9 vortec
@PhillipBailey Жыл бұрын
Fuse 21 which is 25 amps feeds the fuel system control module. The 6.0 uses the fuel pump relay and fuse. 7:30 in this video shows your fuse.
@mikeunger11012 жыл бұрын
Was exactly my problem
@PhillipBailey2 жыл бұрын
Yes this one caught me for sure. Glad it helped you out.
@commradhypnotic8 ай бұрын
Hoping someone can help. I had this happen to me. I checked the same fuse after watching this video. Sure enough mine was blown. Now with the key off, not even in the ignition, I put a new fuse in, and it immediately blew. As soon as the fuse touched the fuse box prongs. Anyone know where I should start?
@PhillipBailey8 ай бұрын
try unplugging the main connector to the fuel pump module above the spare tire. then plug in a new fuse. if it still blows there is a short in the harness. if it doesn't then likely the fuel pump module or the fuel pump is shorted. Sometimes the housing of the FPM corrodes due to salt from the roads. check the housing.
@davelundquist9419 Жыл бұрын
How do you remove the top portion of the fuse block? Thanks
@PhillipBailey Жыл бұрын
Remove the fuse panel from the truck. Take several pictures of all the fuse and relay locations them remove every fuse and relay. The top lifts off once you release the plastic tabs around the edges.
@franciscohunter44223 жыл бұрын
Hey hi mister Phillip I have a 2013 Ford f450 6.7with this code P20C1 I already replaced the redundant heater two times and still the check engine light on, and still it telling me the same. Can you help me with that please
@unclemarksdiyauto3 жыл бұрын
I am not familiar with that system, but it could be the reductant heater is ok. (Or the 2 you put in are bad-probably not Ford part, right?) It could be shorted circuit in wiring or harness. I wonder if there are any Ford tech bulletins on this problem? Any burnt or damaged wiring in the harness?
@franciscohunter44223 жыл бұрын
@@unclemarksdiyauto thanks 🙏 brother, I already take it out again and put another new heater with the pump too and the check engine light still on.
@capitalr86493 жыл бұрын
Did that fix the problem?
@PhillipBailey3 жыл бұрын
Yes the fuse panel fixed it.
@drrunmedown82202 жыл бұрын
My damn box label is wrong also
@ChaoticWrath2 жыл бұрын
I thought I was crazy, same issue here. It's pinned and everything...
@davidellenbaum12293 жыл бұрын
hope you put a new fuse box in they are junk
@PhillipBailey3 жыл бұрын
Yes I did for sure.
@MAMTIMAC3 ай бұрын
@@PhillipBailey Great info on this video! I'm about to check mine, as it has the same symptoms and occasionally has been known to have a no crank condition as well. Do you remember the ball park price of the fuse box? Just want to mentally prepare myself if multiple legs are broken/corroded.
@MAMTIMAC3 ай бұрын
You're a lifesaver! Just got back home, that 25A FSCM fuse was indeed corroded. Cleaned out the corrosion and replaced the fuse and it started right up.
@PhillipBailey3 ай бұрын
@MAMTIMAC this one was number 22798215 and now retail is $743.96 Canadian. Always check by vin for your truck as there are 5 different options available
@MrTravisAl7 ай бұрын
What if the headlight actually fried it 😂. :(
@PhillipBailey7 ай бұрын
No the pump draws upwards of 15 amps and a headlight draws around 3 amps. This is corrosion damage.
@0OMG3 ай бұрын
It's the fuse box itself. I am literally dealing with the same issue currently.