How To Remove Air From Power Steering System WITHOUT Bleeder Valve (Andy’s Garage: Episode

How To Remove Air From Power Steering System WITHOUT Bleeder Valve (Andy’s Garage: Episode - 142)

Рет қаралды 593,087

4 жыл бұрын

Andy Phillips shows how to remove air from a power steering system on a vehicle without a bleeder valve. Trapped air can cause the power steering to make a whining noise, and potentially cause damage.
Below are other videos of mine that may be useful:
How To Burp A Cooling System: • How To "Burp" Cooling ...
How To Clean Electrical Connectors: • How To Clean Electrica...
Replacing Valley Pan Gasket - 5.3L V8: • How To Replace Valley ...
How To Clean A MAF Sensor: • How To Clean A MAF (Ma...
How To Replace A Damaged Electrical Connector: • How To Clean Electrica...
How To Remove Stripped Exhaust Flange Nuts & Bolts: • How To Remove Stripped...
Removing A Nut From A Bolt Grip Socket: • How To Remove A Nut Fr...
How To Remove Stuck Or Seized Lug Nuts: • How To Remove Stuck Or...
How To Remove Stuck Nuts & Bolts From A Socket: • How To Remove Stuck Nu...
How To Repair Damaged Threads On Nuts & Bolts: • How To Use A Tap & Die...
Removing Rusted Nuts & Bolts: • How To Remove Rusted &...
Removing Stripped Screws: • How To Remove Stripped...
How To Use A Tire Tread Depth Gauge: • How To Use A Tire Trea...
How To Change A Flat Tire: • How To Change A Flat T...
When To Change Your Tires: • When To Change Your Ti...
Chicago Electric Impact Wrench: • Chicago Electric 120v ...
How To Properly Inflate A Tire: • How To Inflate Tires P...
Air Compressor - Product Review: • Air Compressor - Produ...
How To Fix A Spare Tire Mechanism: • How To Fix Spare Tire ...
How To Patch An Inner Tube: • How To Patch An Inner ...
How To Use A Fix A Flat: • How To Use Fix A Flat....
How To Replace A Brake Booster: • Brake Booster Replacem...
How To Remove Bearing Race From Hub: • How To Remove Bearing ...
How To Press Wheel Bearings: • How To Press Wheel Bea...
Removing Hubs With Hub Puller: • How To Easily Remove H...
DISCLAIMER:
The individual featured on the Phillips Vision KZfaq Channel identified as Andrew Phillips, also known as Andy Phillips is not a professional mechanic, contractor or certified repairman. He does not have any formal training in the automotive field, or any other trade. He is strictly a Do It Yourself handyman.
Phillips Vision, or the individuals featured on this channel, assume no liability for anything you choose to do to your vehicles, appliances, games or any other items featured in the videos before, or after watching one of the videos or utilizing the content from this channel.
All Do it Yourself (DIY) repairs or modifications you perform are at your own risk. Proper safety precautions are always needed, and are the responsibility of the viewer to follow. In some cases, even if you perform everything properly, you can destroy or damage one or more things you are working on resulting is costly repairs.
In addition, if for some reason, the instructions on this channel are incorrect, resulting it something becoming damaged, Phillips Vision and those featured on this channel WILL NOT reimburse or pay in any way the costs that may be incurred due to following wrong instructions.
PLEASE DO NOT PERFORM ANYTHING SHOWN ON THIS CHANNEL (PHILLIPS VISION) UNLESS YOU FEEL COMFORTABLE AND CONFIDENT TO DO SO.

Пікірлер: 407

@patrickchaplin2365 Жыл бұрын

G.B Stein said " silent gratitude isn't much use to anyone."- with that I say thank you sir!

@Bok2022st 3 ай бұрын

Thanks for making this video you saved me money I was about to change the power steering pump but all it was was air in the system after changing the line's cheers mate good vid 💯💯👍

@PhillipsVision 3 ай бұрын

Thanks for the feedback, glad it helped

@Bok2022st 3 ай бұрын

@@PhillipsVision sure did cheers Phil👍

@c-martz2846 7 ай бұрын

I flushed my power steering on my 200k subaru and it was whiny and was foaming like as if it had rabies. I did the trick as mentioned and it worked. No foaming and pump is quiet. Ill follow up if goes rabid again😂😂

@dianarichmond8968 Ай бұрын

Same here!!

@andersongutierrez3672 3 ай бұрын

Glad you made this video mechanic wanted to charge me for putting a new pump plus labor I did what you said and it fixed love you saved me $500

@PhillipsVision 3 ай бұрын

Great to hear 👍

@twjkumliab7382 3 жыл бұрын

Wow that’s an easier way of getting air out of the power steering issue bro. Great video. Thanks

@PhillipsVision 3 жыл бұрын

Thanks for the comment

@izzycamaro 2 жыл бұрын

After pulling the power steering pump out to replace the a/c compressor on my 2003 Tacoma and installing the power steering pump back on it just would not work like it was suppose to, but after watching your video and you mention that it took you at least 20 minutes I followed your instructions and it worked perfectly. Other videos did not mention it could take that long, so that part helped a lot.

@dianarichmond8968 Ай бұрын

Thank you so much! I took my ford Taurus into shop to replace serpentine belt. The shop did not put any flyids back in my car, let alone bleed. They were so ugly to me and told me they didn't do engine work and i was looking at at least $500 just for labor. My car has just been sitting because they got $2,000 almost for the belt and back brakes. I was so discouraged that i couldn't even drive my car and now i was going to save up more money for a new ps pump, hoses, etc. im going to tey this this week and pray it works. My mind has hust been baffled. I didn't know what i was going to do. So......thank you so much for posting and all of the replys!!!!!

@007dubbleR Жыл бұрын

THANK YOU! I just replaced my power steering pump but it's hard to steer. I wasn't sure about the bubbles coming up from the reservoir. The two videos I watched that helped me do the replacement for my particular make and model did not cover this little detail. They just showed hooking everything up and topping up the fluid. This video tops off those two and shows me what I need to do. Thanks again! Good job!

@diego9x Жыл бұрын

I see movement on the reservoir when car is idle and steering ir hard when parking only, maybe those are bubbles and is the oil movement to be expected? I thought it was because oil was circulating

@bertlindquist7548 2 жыл бұрын

Thanks. Fluid dropped down on the belts, so after I tightened the screw on the power steering upper tube line, I just had to get the air out from the system. It worked great the way you recommended it - moving the steering from left to right ✅ Thanks so much.

@federico5162 8 ай бұрын

I'd like the way you explained the whole procedure how to remove air bubbles in the steering system. It was done very professionally and very specific. Thanks for taking the time to share with us. 👍

@PhillipsVision 8 ай бұрын

You’re welcome, thanks for the feedback

@miabellajenny 3 жыл бұрын

Thanks for the education ! I started hearing the sound and the smell a little bit ago. I had an estimate for the air conditioning. It has not been working from day one. The price was too high. I knew something was wrong because of the sound. They indicated the power steering fluid was low. I was not going to take my car to have someone fix it. So I found your video. Followed your instructions. Now my car is running perfectly. When I bought my car I decided to take care of more issues by myself . I am having a tremendously fun time. I am grateful for your help! Also I found someone who is fixing the air conditioning for one third of the cost. Proactive!

@wiicdemon069k8 2 жыл бұрын

Did your AC get fixed?

@redhandedreviews3482 3 жыл бұрын

I did the same thing to my 05 grand cherokee 5.7 limited. It does work. It was on a new pump installation.

@alejandrocervantes5477 3 жыл бұрын

I have a 2002 Tahoe that I replaced the power steering pump and immediately I noticed on quick turns my steering wheel would tighten up didn’t know what was going on till I watched this vid and tried it and it worked for me thanks bud....

@PhillipsVision 3 жыл бұрын

Awesome, glad this helped👍

@joaquinaguirre2976 10 ай бұрын

Thank you Phillips. I have to redo it again, now that I understand that can take 20 or even more time depend of amount of air.

@DT-ge8gd 3 жыл бұрын

Great vid showing a simple technique that works. One thing I would suggest... when doing this, jack the front up a little, just enough to get the tyres off the ground by only an inch, and maybe put a block or bricks underneath, this way going back and forward turning the steering wont tear the crap out of your tyres, and it lessons the strain on the power steering pump too !! 👍

@PhillipsVision 3 жыл бұрын

Thanks for the feedback

@dougsperber3380 3 жыл бұрын

Aqaqaa

@dougsperber3380 3 жыл бұрын

Be careful when you come in Skittles is gone

@cocainecowboy215 2 жыл бұрын

Very Good suggestion i did this once with my car and i was not aware that I had a silence but deadly ball joint and the excess strain on my suspension from doing this on the asphalt caused my ballpoint to break when i moved the car 10 ft after bleeding the power steering and my axel fell out. Good thing i was in my driveway

@carlosarturoberon5960 2 ай бұрын

Perfectly spoken and presented video. Thank you. Best I've seen.

@PhillipsVision 2 ай бұрын

Thanks, glad it helped 👍

@ceciliacubias9126 2 ай бұрын

Thanks a lot for the help!! I do appreciate it. Instructions were very clear and easy to follow. Thanks again. God bless!!

@djzach9446 5 ай бұрын

This took the wobbling out of my steering! Thank you!

@marymack7530 Жыл бұрын

Worked great on my 2003 Chevy, I tried factory method, 5 other methods, none worked. Your method worked because of doing it with the truck running and the cap off and the length of time, you mentioned that it could take 20-30 minutes which is exactly what it took mine to finally bleed all air out. I did however, raise the front off the ground which is important to help save your suspension, tires and steering components if doing it for 20-30 minutes.

@mtwata 2 жыл бұрын

Incredibly helpful! Thanks a lot for the detailed video. Subscribed!

@PhillipsVision 2 жыл бұрын

Thx

@felizardodelacruz2843 3 жыл бұрын

I will do this on my 04 santa fe. Thanks man!

@TIPEJOH69 3 жыл бұрын

Worked on a Ford Mondeo mk3👌🏻 Thanks!!!

@Justin-8023 2 жыл бұрын

great video. didn’t realize how easy this was. one new subscriber.

@PhillipsVision 2 жыл бұрын

Thanks

@vybes-withzy8226 2 жыл бұрын

Thanks for this video. I’m going to try this out.

@rumpple4skin976 2 жыл бұрын

solved my problem and it worked like a charm

@cristnuishope 2 жыл бұрын

EXCELLENT! I had heard the same exact noise went to check the fluid and it was low. Filled it to correct level but still have the same noise. Thought it was the pump until I saw your video. Problem solved! Thanks again!

@justwatchingffs371 2 жыл бұрын

Usually low fluid level means you have a leak.

@candicecattles6483 6 ай бұрын

Thank you 👍 Looks easy enough l think l could do this myself. Thank you for the information!

@obinnanwankwo1271 2 жыл бұрын

Thanks very much for your informative demonstration

@PhillipsVision 2 жыл бұрын

Glad it helped

@Candoit2 2 жыл бұрын

Thanks for this video! I will certainly try this and see if it helps! Subscribed and thanks again!

@PhillipsVision 2 жыл бұрын

Thx👍

@skippachuck4161 Жыл бұрын

Thank you I was going to Key West and this was the last thing I needed to do thank you

@TG-ng2ko 2 жыл бұрын

Great video thanks so much bro..I will try this

@The_Penny_Seventeens 3 жыл бұрын

Thank you! Works perfect now yay!!!

@sticksandstones1885 3 жыл бұрын

🎯Thanks very helpful 👍

@creammachine5160 3 жыл бұрын

Patience is virtue

@tyl3raz7 3 жыл бұрын

@imranbaloch4917 2 ай бұрын

thanks for the video, very helpful

@snakethe6prince 5 күн бұрын

THANKS FOR THE VIDEO

@techieg33k Жыл бұрын

This is exactly how I thought it was done, but I wasn't 100% for sure. Thank you!

@theeagle4540 3 жыл бұрын

Thanks for the video, worked great no noise now, it did take a while, appreciate your help.

@PhillipsVision 3 жыл бұрын

Glad it helped👍

@obionekanobi9873 2 жыл бұрын

Helped me out Thank you 🔥

@sandradean45 4 ай бұрын

Thank you. I learn from you. My power wheel oil. 👍

@Richardson501 3 жыл бұрын

Hope you're around. Replacement pump done. Refilled with fluid, bump started engine a few times until all old fluid was out. Hooked up hoses & rotated tires until fluid STOPPED going down. With fluid at operating height, I started engine and turn wheel. Checked fluid only to find it ALMOST over flowing. Help, what went wrong.

@pabloyarzon6208 2 жыл бұрын

Great video ,thanks

@johnwilkerson2195 2 жыл бұрын

I've an 03' or Cruiser and I just fixed a leak in my power steering cooler and your video was very helpful thanks!!

@PhillipsVision 2 жыл бұрын

Glad it helped👍

@juanrivas1273 2 ай бұрын

Perfecto. Gracias por el conocimiento transmitido.

@safeertravel9003 Жыл бұрын

GREAT VEDEO VERY INFORMATIVE N USEFULL KEEPUP

@SSBrillo 5 ай бұрын

Worked thanks brother

@ramonrequilman2127 2 ай бұрын

Thanks for sharing.

@ohmann88 2 жыл бұрын

Thank you for the video

@jamesgunter7699 2 ай бұрын

Thanks Andy

@larrybill5388 2 жыл бұрын

Thanks great video

@hungdinh4099 Жыл бұрын

Very good Video...Thanks

@uponsunnah6986 Ай бұрын

Just replaced my power steering pressure hose at thr shop due to leak. Now it makes this noise whenever i turn. It was nit an oem part and also not genuine Honda fluid. Gonna try this trick.

@tomswill9189 Жыл бұрын

Great video.

@Otis33393 4 ай бұрын

I love you respectfully.

@shbt8875 2 жыл бұрын

Thanks I will try this

@inspector9290 3 жыл бұрын

Thanks you are genius

@hayatbrohi3929 2 жыл бұрын

Thanks sir its good help

@demichaelmcgill941 5 ай бұрын

This video is awesome it worked

@PhillipsVision 5 ай бұрын

Awesome, glad it helped 👍

@TheChubbyJB Жыл бұрын

Worked like a charm on my 04 4Runner!! Got a bunch of air after fixing a return line and now back to being quiet as a mouse!! Thanks!!

@coltonlampton4033 2 жыл бұрын

Thank you so much

@gwenenfinger2938 3 жыл бұрын

Thank you .

@bullet1985420 2 жыл бұрын

U can do this without the vehicle on. It dose not need to be on. Turn key to accessory n turn the wheel left n right. Once there r no more bubbles ur gd. This method works vry well.

@izzycamaro 2 жыл бұрын

Thank a lot for the nice video.

@PhillipsVision 2 жыл бұрын

Thanks for the comment, glad it helped

@kelceygerman1400 3 жыл бұрын

I did similar except that I had my front wheels off the ground with jacks, better than getting flat spots on my front tires from sitting in one spot turning and turning right to left while not moving. From time to time I used to remove cap and in an empty parking lot I would find a spot to turn all the way one way and then all the way the other way before I came up with the simply jack it up idea. If you're ever going to blow a power steering hose it will be when you're turning the wheels while not moving.

@romanjaspe4172 Жыл бұрын

thanks so much brother

@kevinbrabyn864 4 жыл бұрын

Doesn't work on newer vehicles so much like it did on older model. Some must be bleed out or vacuum purge to remove the air.

@jerrycannon6940 2 жыл бұрын

How did air get in it in the first place.? Im suspecting an pin hole in the line. Maybe a rusted area underneath the car or an area where two lines are joined by a clamp that lost its tensioning ability

@sylviamb2504 2 жыл бұрын

Fiance replaced the pump, refilled with the fluid, did the bleed with a kit but now the steering won't turn. He tried all these steps. With or without a kit. He has an '03 Toyota Tacoma!

@PhillipsVision 2 жыл бұрын

Make sure there is no blockage in the hose.

@stellarjay3983 4 ай бұрын

okay so i have a question. Im fairly certain I have air in my lines but with this also relive some of the struggle it takes to turn my steering wheel? just did a full rack,pinion replacement as well as my pump and the car still has trouble turning

@CHarris73 11 ай бұрын

I have a concern after teplacing pwr str pump,and the steering gear box ,i have done this for nearly an hour at my house, wheels off the ground ,and yet it se4ms that air is still in the system, because my steeriing serms stiff a little when driving, i dont know of its supposed to ferl that way because the components are brand new,but its wierd feeling. I know my old gear box had a lot of play in it,and hadnt bern replaced since 1999.

@Brownguy504 Ай бұрын

Good morning. I hope you have time today, I have kinda the same problem. My lower steering pump is gurgling every time I turn . I hope this works fir Mt grand prx

@PhillipsVision Ай бұрын

It should unless you have a break in the system that is allowing air to enter

@casanovatime2038 Жыл бұрын

Thank you sir 🙏

@truepatriot2797 2 жыл бұрын

Just an FYI if you’re getting air in your power steering lines just getting the air out is usually only a temporary fix. The most common reason for air in the line is bad o rings. If you want to solve the problem those bad o rings will need to be replaced, or it will just continue to happen.

@ragnaroksangel Жыл бұрын

Wrong. Most common reason is failure where the rubber portion of the line meets the crimping.

@suhtangwong Жыл бұрын

@@ragnaroksangel wrong, the answer lies within the gasoline you use, use premium for best results 🙏

@justicemcneal7899 Жыл бұрын

How would you fix an 98 ranger? Brand new rack And pinion All new power Steering lines. And a new Power steering pump But it still sucking in air from somewhere

@lancelawrence7169 Жыл бұрын

U it jkk

@jonmo2694 Жыл бұрын

@@suhtangwong ?🤣

@89jmcfar 2 жыл бұрын

Thanks 👍👍

@az9luis 2 жыл бұрын

Thanks bro.

@steveTGO 2 жыл бұрын

Turning the steering wheel from left to right to left to right, etc.... works better on older vehicles, newer vehicles are getting more complex and generally require the pump in order to bleed!!!

@jjvaldes9 3 жыл бұрын

It did work 👍🏼👍🏼

@PhillipsVision 3 жыл бұрын

Great 👍

@HebrewYahuawakened 2 жыл бұрын

I have a 1994 Chevy suburban, I’ve had the power steering pump done, several times what could be the problem?

@ram43x80 2 жыл бұрын

Good video

@mi5veezee 2 жыл бұрын

THX bro!

@bigdog3929 2 ай бұрын

Thank u

@mareerogers7663 2 жыл бұрын

Good got it off tyres like that no strain however it gulps bubbling a bit more then bigger then it went left right ten times maybe it cools off before we drive on so it need to flush for its manufacter no valve modern I guess it needs tractionimg or a warm up it was hot, and did a three sixty reverse I Slowly see this point

@shannonpeters6551 Ай бұрын

Thank you for the video but I have a question my power steering pump is doing the same thing but when I get it out it seems like it is a few days or a little bit longer that it does it again with the noise so why when it's never been worked on that it has air in it

@PhillipsVision Ай бұрын

May have a leak that is causing air to enter

@ytubesub8514 2 жыл бұрын

Thanks for the help man, hopefully this will work.

@jessicahunt7299 22 күн бұрын

Can someone please let me know if it's normal when doing this for the whining to get louder at first? Changed the pump on my 03 audi a6 and it was still whining really bad. I know it's air in the lines but I'm turning the wheel and checking fluid and it is foaming and really big air pockets coming out so I know for sure air is coming out but it gets louder and louder at like 5 full turns and I get nervous and stop. I just bought jack stands to get the wheels off the ground and am going home to try again but hope to get advice on this first! I would hate to blow a brand new pump! Audi is expensive and SO hard to fix at home on my own. I'm a woman and I get it done but I'm very nervous over this. A quart of the required fluid for an audi is 60 bucks a quart. I don't wanna be throwing away money!

@naturallyaspirated3810 2 жыл бұрын

What does it mean when steering is hard to turn at low speeds and braking

@koshnaranek2317 Жыл бұрын

Now you just need to replace that faulty oil pressure sensor. If you have the I6 it is a simple swap not so much with the V8 being at the top of the engine.

@rehanaziz3839 Жыл бұрын

Hi I replaced power steering pump and rack on 95 corolla but now steering is hard like it doesn't have power steering.I have tried this method of removing air but still no luck.

@johnrollison7952 11 ай бұрын

One issue I see, is with the constant back and forth of the tires on the ground, you're scuffing off the tire tread in one spot on the tires.

@keithsewell283 3 жыл бұрын

My rack thanks u for this.. I put to much in

@manvanross 2 жыл бұрын

My Ram ProMaster steering growls when turning. I’ll try this and check back. Thanks!

@PhillipsVision 2 жыл бұрын

Also make sure your levels are good, and no leaks

@manvanross 2 жыл бұрын

@@PhillipsVision checked that yesterday. Thanks!

@manvanross 2 жыл бұрын

@@PhillipsVision so the level is correct and no luck on removing air. It still growls when spinning the wheel

@PhillipsVision 2 жыл бұрын

@@manvanross could be your power steering pump failing

@46singledad46 3 жыл бұрын

My 2004 Pontiac gran prix same issue can I still use the method you used here even if it has a bleeding valve.

@PhillipsVision 3 жыл бұрын

If it has a bleeder valve use that first since that should remove the air. If you still have air then try this method.

@edgarmelgoza2497 2 жыл бұрын

Philips visión thanks

@Heenfio Жыл бұрын

What does it mean if the fluid in the reservoir is shaking when the car is in

@kylebrown1866 2 ай бұрын

What does the bleeder Val look like?

@IzzySk10 2 жыл бұрын

So lift the front of the vehicle then go on from there?

@stevesas632 3 жыл бұрын

Thanks for the video. Shouldn't wheels be off the ground if turning from lock to lock for that long? No stress on steering shaft etc?

@PhillipsVision 3 жыл бұрын

It is recommended

@MrJ6789 Жыл бұрын

What if you can’t turn left or right at all as if the truck is off?

@royjohnson1375 2 жыл бұрын

I have an 01 gt bullitt an i guess the power steering pump works my clutch thur a hydro something.i changed out the power steering pump and my clutch sounds like itz a bad set of breaks.but the clutch paddel feels fine.someone tell me what it could be.i have a new clutch coming