I have watched a lot of tutorials in my time and the presenting style of this video is the best I have ever seen. I really like the speed you get through such a complicated subject and that every single choice you make is backed-up with an excellent explanation as to why, without holding up the flow of the video. I was captivated from beginning to end and feel like I have learnt something along the way. Thank you very much - you are a true master.

Thank you for a very nice and detailed tutorial ! and congratulations to Ivaylo and to the whole team for the amazing new features on Phoenix FD 2.2

Good tutorial.😊 Just a few points regarding ship' design. The hull's wake is too linear with no divergence at the stern. At the bow, the wake angle is too big as well. That's due to an excesive draft that doesn't allow for a smooth flow. The water line, in normal ship's condition, must be below the tramson edge. Submerging this edge is always avoided due to the very high drag it induces. An aproximate reference is that the water line must be below the line between the red and gray parts of the hull.😊 Another point about speed. Over 30 knots is a standard service speed for this kind of vessel that corresponds to over 18 m/s. Good tutorial, thanks for sharing 😊

I keep getting hard hard edges around the simulator especially at the back and sides of the ship. I tryed setting the fade out in the rendering rollout without luck & i definitely have the ocean level setting equal to the initial fill up. did anyone get this problem? what could be wrong?

great tutorial, i also learned of v ray

I was wondering. Can we actually keyframe the size of the Grid (container)?

My version of Phoenix FD doesn't have the "Ocean" drop-down option under "Rendering" tab. It only starts with a check box for jittering. I'm using version - 2.1.1. Any suggestions?

I can't find the Liquids tab (parameters) in the 3.00.01 DEMO version for 2017. Has it been replaced or consolidated in a different tab, or is it not available?

Can you make a maya version tutorial please? You didn't update tutorial for maya for a long time.

splash and foam wont appear help!

what if i have a truck driving through h mud holes. Then mud will not appear untill truck gets there with that green box

can phoenix fd simulate waves force on the ship ? like make the ship float in the water and interact with the waves

I'm having a trouble i cannot batch render phoenix materials using vray in maya but i can render a single frame with it.

I need help. When I make the video I see the boundaries of the phoenix box. Can I fix this problem? It is urgent to please

Awesome tutorial. I've used the sample file a couple of times but nice to be able to set up the whole thing myself. How many hours did you use on the simulaton itself? I have followed your steps and have a resolution about 40 mil. but after 5 frames it's still over 24 hours of simulation left, which I guess will increase further. This is before foam and splash. Have Intel X5660 2.8ghz and 25 gb ram.

Thank you for the tutorial. Very helpfull. I was wondering how to fix a problem im having. I want to have multiple ships as a copy from 1 simulation. The problem is that the infinite oceans are blending with each other. Is there a way to blend seamlessly multiple simulators with ocean mode. I really hope you can give me some advise. I have been trying all kind of things. And im getting the feeling my only solution is to do it with composting and try to blend them with masks. although my setup is complex enough so don't want to add more passes and render time! And the second problem im having is, The fade out parameter is not working for me. Any advice on that ?? Thank you in advance!

For some reason when i do the step of passing the preview to " mesh" it doesnt appear o.o am i doing something wrong? the simulation does great like on the video but when i try mesh it it doesnt do the same D: help

Good stuff but unfortunately this tutorial is no more totally compatible with phoenix release 3.0, please is possible new tut for last release, thank you :)

What are the specs of your PC please? I want compare my sim times to yours. And my foam is just not detailed at all, even though im using a similar number of cells to yourself.

please I want your help , I have installed phoenix fd in windows 8.1 with 3d max 2014 , but the phoenix fd not appear inside 3d max ... how can i solve this problem ?????

is it possible also to create rough sea with Phoenix FD? And to simulate the interaction of waves of the sea with a boat (pitch, roll, heave motions)?

Could we have the boat in order to follow this tuts please???

how could make a low render time?, y have 30 min for frame..please need help..

Hello! Wich are the pc specs that you worked with? Thank you!

can we have a tut on ocean submarine or some case study

The best!

can i use this tutorial to learn how to make a whale jumping splash?

This is really amazing, Just wants to ask a questn, Fr 3ds Max architectural work and such kind on fluid animations I wants to upgrade my graphic card so which graphic card is good, quadro p4000 or rtx 3080... ? Pls help

Sir, I installed 'PhoenixFD 30400' in 3ds max 2014 but I am not getting find 'PHXSimulator'. Please inform me, how can i get PHXSimulator.

Thanks for the great tut! Very useful information there. Is it possible to achieve this using Phoenix 2.0 for maya?

amazing tutorial! thank you so much!!

Is there a way to decrease the foam rendering time? I'm animating a small motorboat and it took 30 minutes to render only the foam part of the picture about 350 pixels square. My computer is pretty fast tho.

where can i get the ship?

I see only black on rendering time..can somebody help me ?

Cool! I think it will work with 3dsMax+Vue xstream!

We've been metric in the UK for over 40 years :p

Dear Tsvetan Milanov Please make tutorial for architectual fountain. Tnx :)

awesome. thx. more tutorials . thanks

pls tell me the memory of ur machine

good stuff, thank you

Finally

what are the specs of the pc?

The same for 3.0 please do this

Anyone who wants the updated one, there is one here on Chaos Group's site: docs.chaosgroup.com/display/PHX3MAX/Ship+in+the+Ocean

update tutorial for new phoenixfd 2020 please

Thanks for the tutorial George St Pierre. :P

Fewwwwwh .. what a headache one .. too much details and branches .. how genuis they are those the programers and the ones who are behind all these stuffs .. god bless your efforts :)

Please create a maya version

pass the ship model my friend

луд си Цецо!!!!!