Photo Practice on Aluminum with 30w Fiber Laser: Lightburn Galvo Tutorial

Рет қаралды 7,089

Жыл бұрын

Showing you guys how I engrave photos on shiny metals with my 30w fiber laser using Lightburn Galvo!
if you learn something cool and useful be sure to zap that like button and subscribe!

Пікірлер: 22

@davidelder5399 Жыл бұрын

That one to the right, the detail is crisp & sharp. Great job👍

@humblearms Жыл бұрын

Great work 👌🏻👌🏻. Who knows, maybe somewhere down the road knowing how the first image came out might inspire you to do something you normally wouldn't have done.

@finalaccuracy7695 Жыл бұрын

Awesome!!!! Great tip. Hate the ghosted look

@ays2013boss 6 ай бұрын

I really wish somebody would do a video that actually explained how to do this from start to finish because every video I watch I put in settings that they have and nothing comes out looking good. I just don't understand this man. I swear to God nobody on KZfaq makes good videos. I'm in the process of learning my 50 want laser and when I do. I'm going to make the best videos anybody has ever seen actually explaining step-by-step how to do things. My God man. It's like every video is absolutely pointless.

@faronmastin8683 Жыл бұрын

I like the second one the best.

@michaelgee7123 3 ай бұрын

How did you remove the photo background. Great Job!

@jaydas8135 Жыл бұрын

Hi bro..really it's look great job .. Plss if possible Gold and silver and brass matel...how u put speed and power and frequency..its helpful for me. Thanks

@emmanuelzimba7213 8 ай бұрын

Nice video what software did you use to edit the photo before transferring it to light burn ,My fiber lasers framing is off , Is there any way the engraving and framing can be fully centered

@cheryleawalker2762 2 ай бұрын

How do you get it to etch out in white the first round? Im a newbie and ive had evrything the same as yours only it etched it as black negative?

@DrRosieDVM 6 ай бұрын

Have you done any images on coated aluminum yet?

@ENDKONTROLLE 10 ай бұрын

Thanks for your Video👌 My english is a little bit …. shi@ but your Video has help me. I have many time work with photos engrave with my new fiber laser but the result always bad….and i have no idea but i test your settings with negative next time…i hope its good🍀😊 Best Regards from Switzerland Roy

@jessesquela 3 ай бұрын

Isnt increasing the frequency removing the most material and not the other way around like you said?

@user-bx9hy4ht7j 2 ай бұрын

The lower the frequency, the harder it’s hitting the material.

@JimPierceJr 9 ай бұрын

Are you still doing this. I could use some help

@georgebalasa2955 11 ай бұрын

Can't get black on aluminum with my 20w

@RrLl-br5eb 11 ай бұрын

can you briefly summarize the steps again, what exactly is necessary so that it no longer reflects?

@jjengraves227 11 ай бұрын

Yeah sure. First you want to engrave the surface area where you are putting your photo. Use high speed lower power. A square or circle shape works well for this. Once your surface area is engraved it should look a lot lighter than the material around it. Then engrave your photo at a lower speed and higher power over the surface you engraved previously. Hopefully that helps!

@RrLl-br5eb 11 ай бұрын

@@jjengraves227 thank you very much! Can you recommend rough settings for a 20w laser with 110mm lens that I can start with?

@jjengraves227 11 ай бұрын

@@RrLl-br5eb I have a 30w so mine would be a little different. I usually run my photos at around 200 speed 65-75 power Around 600 DPI The surface area engraving I run 1500 speed 45-55 power

@RrLl-br5eb 11 ай бұрын

@@jjengraves227 which lens do you use for this?

@jjengraves227 11 ай бұрын

@@RrLl-br5eb I'm using a 200mm