Cnc Router cutting aluminium

Cnc Router cutting aluminium - Test high speed

Рет қаралды 10,093,212

7 жыл бұрын

CNC Router cutting aluminium 6061
Test high speed
CAD by Illustrator
CAM by Artcam
CNC Woodpecker DP1212
/ phucnguyencnc
Phuc Nguyen DIY | CNC

Пікірлер: 1 300

@phucnguyenCNC 7 жыл бұрын

Hi everybody! This is just an aluminum cutting test on the bed that has improved my surface. And I'm glad the result was not a mistake. Surely this is not a good solution because the scope of safety is very small, and not for the faint of heart. 😃 Thank you for watching and commenting!!!

@sweetyarora9152 7 жыл бұрын

phucnguyen CNC I love

@geelss6467 7 жыл бұрын

*There is a cnc build guide on >> **woodcarvingmachinee.blogspot.de** >*

@liammiller4758 7 жыл бұрын

Great video. Now I really want to create a cnc for my powerplasma cutter.

@Rick-cs5rc 7 жыл бұрын

what uis name the machine؟

@sonuverma2796 6 жыл бұрын

phucnguyen CNC sir please contact me I want machine for coin die engraving on iron, my whatsapp number is+919335338898

@snappypappy5906 5 жыл бұрын

So many people that downright know everything. These days college is useless when you can just watch KZfaq comments, and learn all the secrets of life. Please, more comments on what he should be doing that he's not. I'm sure he takes all this wonderful information to heart, and completely throws out his setup/tooling/routine/ect, in exchange for something a 40yr old unemployed man living in his mommas basement has told him. Always a load more gems and priceless information flowing from the guys watching videos vs guys actually being productive.

@themediator11c59 3 жыл бұрын

You forget alot of people have 20,000 hrs behind cnc machines, went to college for machining, and may have useful ideas to share. Supporting the flow of ideas does not mean they need to be implemented.

@ThumbDr 3 ай бұрын

Lol what. Literally nobody has said anything negative in the 6 years since this has been posted 😅 go be a drama queen somewhere else. Like twitter

@muzzaball 4 жыл бұрын

I just love watching CNC milling machines at work. The speed, the accuracy and the precision is something to behold. Quite mesmerising, I reckon I could watch for hours!! Thank you for sharing.

@flashkraft 2 жыл бұрын

"I reckon I could watch for hours!!" Lol. Become a CNC Router operator and you will get that opportunity.

@DodgyBrothersEngineering Жыл бұрын

@@flashkraft but there is something quite mesmerizing about it. I often find myself staring at my CNC while it is in operation.

@fxsrider 3 жыл бұрын

Just last night I was pounding some brews in the garage and decided to take some 1/2 inch aluminum plate and cut it with a high pressure garden hose. All it did was wash off the dust. Nice machine you got there.

@metalmickyturnson 4 жыл бұрын

Very brave with no sacrificial space to the bed! Braver than I am and I can stop cringing now. Awesome confidence and you proved it worked! How much was that piece of Aluminium.....serious envy here :)

@philips170t 4 жыл бұрын

Only 0.4mm gap between workpiece and table. That is what I call man-machine trust. Impressive

4 жыл бұрын

Imagine this gap cutting inconel...

@rogersmith5167 3 жыл бұрын

Used to set the tool start position on a HURCO +.024 of a millimeter every time you hit the start button you lost weight

@aqib2000 7 жыл бұрын

Brave workmanship with the depth cut against the steel bed

@prgarage 3 жыл бұрын

i´m building a cnc without any other cnc machines. good job dude @

@rubalu6014 5 жыл бұрын

That was oddly satisfying to watch. I am not sure how I ended up here.

@venugopalakrishna2894 5 жыл бұрын

kzfaq.info/get/bejne/mtGmdMqUubnUhoU.html

@rbrought 4 жыл бұрын

You are in the Engineering Porn Section.

@letsgoBrandon204 4 жыл бұрын

The KZfaq gods know you are worthy to witness the awesomeness that is CNC

@johnlockesghost5592 3 жыл бұрын

That's said at tittie bars constantly.

@GDMHificationranpitc 3 жыл бұрын

@@venugopalakrishna2894 that was satisfying i followed from the other video.. next up a dremel?

@tryally 7 жыл бұрын

Wow! this machine is amazing, the working noise shows me how really a strong machine!

@phucnguyenCNC 7 жыл бұрын

Hi! Thank you for your comment, I'm glad you liked it.

@chanxanlaserequipment4006 5 жыл бұрын

laser machine is high-efficient

@danielrogers7776 4 жыл бұрын

@@phucnguyenCNC where did you buy the machine from?

@lukehunter3532 3 жыл бұрын

Dear Luiz, This is Hunter from Quick Laser ,a professional laser manufacturer in China . if you need any of ours solutions ,don't hesitate send mail to me : mojiewen@quickestlaser.cn ,WhatsAPP number : +8613761994748 . Best regards，

@mechanic2420 3 жыл бұрын

This is great tip video for people using DIY CNC to cut aluminum. Thanks!!!

@stevenwhite3.1415 4 жыл бұрын

Yeah. It makes total sense to carve out the entire piece rather than the edge.. saves so much time and resources

@thebeststooge 7 жыл бұрын

Now that is one hell of a dialed in machine. Grats.

@diditwork370 7 жыл бұрын

You should try interpolation to full depth and get some troichoidal movement happening. You'd be able to run feed twice as fast and your chips won't be so tiny :-)

@jthorpe454 4 жыл бұрын

You took the words right out of my mouth. That’s what I was thinking.

@robbiejames1540 3 жыл бұрын

Hmm, I think that depends on how stiff his machine is - I've found that even with troichoidal roughing, full depth on my diy router can cause lots of chatter.

@diditwork370 3 жыл бұрын

@@robbiejames1540 Yeah depending on your rigidity you will have to experiment with DOC and WOC. On larger and repeat jobs I'll try multiple strategies to find the highest MRR.

@robbiejames1540 3 жыл бұрын

@@diditwork370 Yeah!

@pabalkha6281 2 жыл бұрын

@@jthorpe454 NV

@jbdesigntech5326 6 жыл бұрын

Very nice cutter. You cut fast and not even with cutting fluid or anything. Wow.

@phucnguyenCNC 6 жыл бұрын

GoGoJoe _ Thanks for watching!!

@davidkaye821 4 жыл бұрын

Very nice to watch, a very good looking part with excellent surface finish, and a very well set-up CNC machine. Kudos!

@rayhjr72 6 жыл бұрын

I know the speeds and feeds were talked about 4 month ago. I am a life long machinist I know my speeds and feeds. The book of speeds and feeds are a guide line but the rigidity of your machine is what counts. This is how to get the best result on your cuts. Shorter end mill (they are called stubbies) when it squeals like that your rpm is to high. Try about 6000 to 7000 rpm. You will need to slow the feed to control chip load. you can go 100 in min. and COOLANT!!!!!!always use coolant to avoid gauling up on the end mill! PS great looking part!

@TheMsjayhawk 6 жыл бұрын

What about just ripping the hell out of it to start with, using a stubby hogging mill, and then tool change over to a finishing mill to go for the final dims with a clean finish?

@alnabawialnabawi1096 11 ай бұрын

Very good machine .. what is the brand name and contact number of them

@bastelmichl4241 4 жыл бұрын

Super Projekt, gut gelöst. Mach weiter so.

@AddictedRC 7 жыл бұрын

Nice. Almost looks like a shock tower for a large scale radio controlled car. Thanks for the vid.

@phucnguyenCNC 7 жыл бұрын

HyperFX841 _ Thank you so much. I'm glad you liked!

@hyperspeedcrab 2 жыл бұрын

this just looks very calming for some reason, i love it.

@ConsertandoTudo 5 жыл бұрын

phuc man, this is really precise.

@jsmoritz2000 4 жыл бұрын

Phuc yes!

@zackblack4098 4 жыл бұрын

Phucing rad programming

@pauldiaz4273 4 жыл бұрын

Zack Black phuc’in bad ass machine

@zackblack4098 4 жыл бұрын

Paul Diaz phuc’n right brother

@bintangantares709 4 жыл бұрын

phuc yu men

@WireWeHere 6 жыл бұрын

Have you experimented with changing from climb cut for a final pass? I've found improved finish with non-ferrous but that was all I tested before handing the keys to my customer. I recorded shaft vibrations induced by cutting and greatly decreased as the finish improved. Reducing feed speed while climb cutting didn't show similar benefit. Nice toy you have. Good day.

@phucnguyenCNC 6 жыл бұрын

Jim Marriott _ Thanks for your comments!

@abrahamorellana9622 3 жыл бұрын

Your video is awesome and you have a incredible talent.

@DodgyBrothersEngineering Жыл бұрын

You're a lot braver than me. I would never leave myself such little margin for error.

@brodeanhzarver3397 4 жыл бұрын

For some reason, this video gives me a satisfying sense of hearing and seeing

@MtM2253 6 жыл бұрын

Why doesn't anyone ever show us what the part is for. It would be really nice to see the part in context. This cannot be a throw away piece just for demonstration.

@jordanharrison4624 6 жыл бұрын

MtM2253 I work in a water jet shop we cut parts all day long for Lots of customers. when I first started that's all I would think about. what's this going to be and how will they use that part. these days it's just like in this video make sure the part is the right size and the edge quality is good and on to the next one

@SmilerSP 7 ай бұрын

Отличная вешалка для одежды получилась)

@DonovanSchroeder 6 жыл бұрын

Calling this a router is like calling a Lamborghini a go-kart. This is a full fledged mill.

@Mekhanic1 7 жыл бұрын

Nice work! I would use higher spacers, maybe 1-2-3 blocks. Sometimes a bit can work lose and then it may hit your table surface. What are you making?

@phucnguyenCNC 7 жыл бұрын

Mekhanic1 _ Thank you so much! It is part of the tea table.

@thegadsdensnake408 6 жыл бұрын

I believe they use 25-50-75mm blocks

@dileepwakle8044 6 жыл бұрын

shairat muve

@scottresch9912 Жыл бұрын

when it broke through i felt for my safety glasses lol

@MultiBruho 7 жыл бұрын

Yes! The factory machine is good. Not what I have collected manually. And the speed is lower, and the supply is less. Thank you for the video.

@phucnguyenCNC 7 жыл бұрын

Сергей Фролов _ Thank mate!

@chanxanlaserequipment4006 5 жыл бұрын

hello, I am joy ,from laser factory , add mywhatsapp 008618361445350

@ianhill20101 3 жыл бұрын

The electric bikes and scooters I could make 😍

@automobilefactory1629 3 жыл бұрын

kzfaq.info/get/bejne/Ztl9ZqaHv7K7gmg.html

@kentvandervelden 6 жыл бұрын

So very nice. I would be nervous with the cutter only 0.4mm above the table. With good equipment though are you likely not as nervous.

@carolsong6874 6 жыл бұрын

i'm sales manager of laser machine &cnc router do you consider purchase a machine? Email:sales02@leapion.com

@mdemdadulhaque4108 6 жыл бұрын

Kent VanderVelden ভ ভাবি ভাবি নাভির

@dylanhou9309 4 жыл бұрын

Hi, sir. This is Dylan from SENFENG LASER.We are professional fiber laser cutting machine manufacturer. If you have any needs, please feel free to contact me.Mob/WhatsApp: +86 17865122577 Email: Dylan@sfcnclaser.com Wechat : +86 17865122577

@lukehunter3532 3 жыл бұрын

Dear Kent, This is Hunter from Quick Laser ,a professional laser manufacturer in China . if you need any of ours solutions ,don't hesitate send mail to me : mojiewen@quickestlaser.cn ,WhatsAPP number : +8613761994748 . Best regards，

@user-ib4uz6ov4z 4 жыл бұрын

A great job always in progress and success

@phucnguyenCNC 4 жыл бұрын

شركة اتش ارللتوريدات العمومية _ Thank you so much!!!

@mysticmarble94 Жыл бұрын

Damn ... I'm 5 years late ... I would love to see more of your CNC.

@valterleao6795 3 жыл бұрын

Simplesmente um Show! Abraço aqui do Brasil 🇧🇷

@ID-MIMMO 5 жыл бұрын

se il mio programmatore fosse così bravo risparmierei molto tempo e soprattutto frese e porchi dii 😂. Good job!

@stephensharma3259 2 жыл бұрын

Do you adjust the passover to 1..or many passover before it fully cuts the aluminum. With wood i just use single passover and it does well. What about with aluminum? ☺

5 жыл бұрын

Nice job. But 12 steps to cut it out ? Is the machine not able to cut 3 or 4 mm in depth in one step ? Its a little less i think. Sometimes we cut 5mm depth in one step with our High-Z CNC Routers

@douglaslodge8580 7 жыл бұрын

Instead of a wood bit use a solid carbide metal bit with a slightly slower feed and speed for a better edge finish? Great video.

@phucnguyenCNC 7 жыл бұрын

Douglas Lodge _ Thank you for comment.

@swde4793 7 жыл бұрын

Douglas Lodge "Solid Carbide Metal" ok sure that's specific. which "Carbide" then Bonehead. And He was using an End Mill! Dumbass. Wood bit huh. And what speed "Slower" Who the Fuck are u? You Do understand then that Speed and Feeds are specified in hand books by Real Engineers....Right?

@robertbonenfantjr1208 7 жыл бұрын

Well Andrew, I would love to see this Magic Speeds and Feeds hand Book you refer to ..... Its Not going to work the same on my equipment and it would be different for Phucnguyen - We in the Cnc industry use simple formulas to find out What speeds and feeds to use (Engineers Not Required) Just Some info from manufacturer is needed. Every Bit manufacturer is different and every machine is different - The Link Below will give you a better edge finish (Just one Option Out of 100s) www.toolstoday.com/p-6447-hss-spiral-aluminum-cutting-single-double-flute-up-down-cut-router-bits.aspx

@swde4793 7 жыл бұрын

Robert Bonenfant Jr, You sir are an untrained idiot. Google machinery hand book Speeds and feeds......Google says they exist. And who the fuck do u think developed your equations?

@douglaslodge8580 7 жыл бұрын

Andrew if you had noticed I was asking a question, but apparently that escaped your attention witch I can understand in your rush to insult me. I would like to apologize for upsetting you. I really hope you feel better and your anger issues subside.

@mauriciozavaleta1223 5 жыл бұрын

I'm in love with that machine

@pgoessnitzer 4 жыл бұрын

Nice job! Wish my machine was as steady as yours. I have to take real shallow cuts, but am working on building an upgrade. Thanks for sharing!

@CalvinoBear 6 жыл бұрын

More flutes, zirconium nitride coated carbide, full DOC with small stepover, Fusion 360 for the cam. You may have already started doing this, but you'll be much, much happier doing these things.

@phucnguyenCNC 6 жыл бұрын

Calvin Stence _ Thank you so much!!!

@Artnovetor 4 жыл бұрын

Máquina muito potente parabéns 👏 👏👏

@bungle555 6 жыл бұрын

Oh Phuc that's nice work!

@user-bb9ur9wq3n Жыл бұрын

Отлично , подскажите , почему не снимаете верхний слой в листах ? Есть мнения что лист после литья\проката , находится в "напряжении" и пока не снимешь верхний хотя бы один слой , он не "расслабится".

@iancrossley6637 3 жыл бұрын

What's the reasoning in hogging out those interior shapes? I would have made two passes of the perimeter and tabbed the inner drop off's. More metal for the recycling bin, less wear & tear on the machine, less time.

@michelepisanu4670 5 жыл бұрын

Ottimo video, Ottima macchina, Ottima lavorazione - Complimenti.

@phucnguyenCNC 5 жыл бұрын

Michele Pisanu _ Thank you!

@KubanRadikal 4 жыл бұрын

Buy from us machines from Russia - the highest quality in the world! kzfaq.info/get/bejne/gamcas1itNHNemQ.html

@vitamin_IM 7 жыл бұрын

on my homemade lathe I have achieved almost the same results. 0.5 mm X 2000 mm/min at 13000 rpm

@songolandgarage7615 6 жыл бұрын

wooow!!! love see the CNC working. thanks for sharing

@savejeff15 7 жыл бұрын

what kind of endmill is it? A cheap on from Ebay or from a known Lable? I'm only used to cheap ebay mills, and always got problems with it.

@YanouFishel 5 жыл бұрын

Nice! But why do you only cut the first run with air cooling and the rest with a liquid cooling? Total newb btw

@baqiralfahdawi5886 5 жыл бұрын

I think only for close up to demo how the cut looks like and sounds

@kamelzadri4856 5 жыл бұрын

Merci

@nguyenvuhoanglong3418 5 жыл бұрын

The first cut just to review the cutting path (or the boundary)...to known where he can add the steel clamp to secure the aluminum plate until final cut.

@suswantowaluyo816 6 жыл бұрын

Awesome machine, ussualy i 'm ussing water jet to cut these material, and 10 mm thickness? wow... Good work guys....

@KubanRadikal 4 жыл бұрын

Buy from us machines from Russia - the highest quality in the world! kzfaq.info/get/bejne/gamcas1itNHNemQ.html

@mcbawangyakuznouxman9439 3 жыл бұрын

How can you be a ninja, in one minute? CnC a shuriken in just a minutes!

@dvdny 5 жыл бұрын

Great machine. Why only 0.4mm spacers? Wouldn't it be safer to use 1-2mm (or have Delrin bed surface)?

@popalock85 7 жыл бұрын

Seems like the very first cut you did was excessive? Why not just cut the perimeter instead of grinding out the whole piece?

@Larry1942Will 6 жыл бұрын

Have you ever used a CNC router? The chunk left behind would become a hazard and likely break the bit as it was thrown around.

@almazfazliev 6 жыл бұрын

А нельзя было внутренние детали сразу по внешнему кругу вырезать? Зачем изнутри резать?

@user-by8gz2jk9o 5 жыл бұрын

металл будет нагреваться и коробится, точность детали ухудшиться.

@user-ll6pd1hr7i 5 жыл бұрын

мне кажется не из-за этого, при последнем проходе внутренняя деталь может выскочить и повредить основную деталь или запороть фрезу.

@user-by8gz2jk9o 5 жыл бұрын

может и так. смотря какие скорости реза оператор будет выставлять. нюансов много.

@paponchik 5 жыл бұрын

задумка автора. НЕ понимаю что тут не обычного.

@emanuelegiachetta5932 5 жыл бұрын

@@paponchik se

@karlfox784 2 жыл бұрын

Instead of putting plastic packers on underside, you’ll create vibration when milling. Clamp straight to bed and leave 0.1 shy of full depth. It’s my job CNC milling 💪🏻

@luisguillermomedina192 3 жыл бұрын

excelente maquinas de precisión son la revolución de la tecnología global

@Noorhussain700 6 жыл бұрын

Nice cutter

@hanshabhaiparjapati9778 6 жыл бұрын

Noor Hussain

@shawncrocker7037 7 жыл бұрын

Cutting it close. Seems inevitable the bit will some day hit the work table.

@phucnguyenCNC 7 жыл бұрын

Shawn Crocker _ thanks for your comment! This is just a test, but I think it can do good for long. Because I have improved the bed very flat. hi

@Bitfrogess 7 жыл бұрын

In the CNC world a few thou is a mile of room. At work we often get within .010" of our workholding. Very little risk of hitting anything if you're smart about proofing the code/setup.

@gusbisbal9803 7 жыл бұрын

The G-Code is not the issue. Its the setting of the collet. The end mill can get pulled out that far with aggressive cuts when the material has hard spots that are unknown to operator ie just harder areas that didn't get solutionised as well. It has nothing to do with getting the G-code wrong. It has more to do with things going wrong that you can't completely check

@shawncrocker7037 7 жыл бұрын

gus bisbal exactly. Inevitable. And once those cuts are in the work table there scares for life. Seems just as easy to put a 500 thou spacer as a 40 thou.

@godfreypoon5148 7 жыл бұрын

That was 0.4mm, not 40 thou... 0.4mm is 16 thou! (I'm sure he cranked down on that collet good and tight anyway.)

@alko4711 6 жыл бұрын

Периодически работаем корейскими фрезами, на фрезу диаметром 6мм даём 9200 оборотов и подачу 2200, режет очень хорошо.

@user-tw8yj7xh7b 5 жыл бұрын

Al Ko а вы в каком городе? Эта машина которая на видео какой марки можете подсказать?

@mryoureauser6723 4 ай бұрын

Wow, it cuts all the way through without affecting the "bed" surface at all. You just shimmed it with a .4mm spacer and you don't have to use a spoil board, huh. Very interesting.

@BossTweed69 6 жыл бұрын

Makes me want to wear eye protection watching this

@jiritichy6855 4 жыл бұрын

W. T. F..... Do you work for insurance Co.?

@stunamvap8617 6 жыл бұрын

please, have you link about this cnc ? tks

@adelhalaseh8591 6 жыл бұрын

Stunam! Vap الهندعههخخككحج

@naveedyosaf6275 6 жыл бұрын

anybody want to buy anything reply me on whatsapp good cheap price 0096893626789

@generalconstruction4858 6 жыл бұрын

إذا أحتجت أي دعم أخوك بالسعوديه .. 00966544749991

@lukehunter3532 3 жыл бұрын

Dear ,This is Hunter from Quick Laser in China, which is a professional Laser cutter /Laser tube Cutter /Laser Welder manufacturer. Kindly add my WhatsAPP/Wechat number : +8613761994748 . or send mail to : mojiewen@quickestlaser.cn ,I'll share more info to you .

@stewartbeckman7909 2 жыл бұрын

Wow! That was a work of art!

@michaelmitchell8218 7 жыл бұрын

Got to be one of the best CNC I seen. Beautiful machine you have there and great smooth cutting.

@phucnguyenCNC 7 жыл бұрын

Michael Mitchell _ Thank you for watching, I'm glad you liked it.

@Life_is_Awesome_Civil 4 жыл бұрын

I wish this would be on my channel

@Rwafaei 4 жыл бұрын

I can cut 10mm in 2 steps with high speed by the router

@runngunrc1991 3 жыл бұрын

What bits would you need cut an recess aluminum?

@rogerroger7734 3 жыл бұрын

Pretty sweet looking gun smithing apparatus.

@MsnNightingale 7 жыл бұрын

Why you mill away those pieces at the beginning in chips instead of just cutting perimeter?

@donboch1156 5 жыл бұрын

WD40 is the best spray you can use on Aluminum to lubricate it.

@jeeprenegade1985 4 жыл бұрын

I have used WD40 and kerosene before. I like both but did get a built up edge on the tool with kerosene, after awhile. I think the one place bought kerosene because it was cheaper. It was the kerosene with the red dye in it. I think it was kerosene and not diesel anyway lol.

@darkracer1252 4 жыл бұрын

wd40 and kerosine are basicly the same thing. but ehh. SOLVENTS. NOT LUBRICANTS

@Rufsilver 7 жыл бұрын

Very good!!!!!

@phucnguyenCNC 7 жыл бұрын

Rufino Silverio - Thanks so much!

@user-on5sx9ys1o 6 жыл бұрын

no,itnogood

@dannyaustin84 3 жыл бұрын

Totally amazing. Nice work

@vivekanand3938 3 жыл бұрын

ln same machine can you cut floor tile or mild steel by changing cutting bit

@brianbeland1482 6 жыл бұрын

running a 4 flute router? try a 3 flute specifically designed for aluminum! Would be able to go much faster! www.kvtooling.com

@tquadenquaden4170 6 жыл бұрын

Mill my fantasi

@unogazzy84 3 жыл бұрын

I'm still getting amazed that machines can be this precise. The operator is extremely important too of course.

@AustineMiles22 Жыл бұрын

kzfaq.info/get/bejne/Z8VnlcRyrrfFlps.html

@crispy-k 2 жыл бұрын

Nice vid, although i would like to hear/see it it running at normal speed. To me, metal sings, i can hear the right sound and now what is right or wrong. I don't need numbers, just normal playback video, i will match the sound ;) I can't wait to buy my cnc next month! Been waiting for so many years and finally will have the money.

@webbwalle 6 жыл бұрын

Lazercutter vill save some time!

@TheCaryeHoy 6 жыл бұрын

Webb walle and and a few little bit without you in it for a

@Ickaroc1 6 жыл бұрын

laser can´t cut aluminium...

@DanstengineeringCoUk 6 жыл бұрын

yes it can?!

@mikkelanderson4560 6 жыл бұрын

Laser can do some good metal cutting but those are expensive lasers.

@ajamit007 6 жыл бұрын

Fibre Laser can cut Aluminium..

@ryannoppe247 7 жыл бұрын

Better tool paths you be good going full depth

@imranmoin228 6 жыл бұрын

Ryan Noppe I need dynachim exposure 520 user guide pdf file plese send me imoin30@gmail.com

@panostzakis6925 5 жыл бұрын

Thanks for the video.Very nice and tight work indead !! I ve got a question for you.I tried to use another drill with one cutting side but after o lot of drills they brake already.I saw that you use double cutting drills Can you tell me please what are the rottation and the moving speed for aluminium or there is a link with these ..

@chanxanlaserequipment4006 5 жыл бұрын

OK , I am joy ,from laser factory , add mywhatsapp 008618361445350 for more detail

@billray1785 6 жыл бұрын

Now a pair of them would make a nice TV stand.

@maxisberry3664 4 жыл бұрын

This is quite relaxing to watch despite how silent it is.

@amranharis6854 5 жыл бұрын

nice video, cbc router2👍👍👍👍

@luismb2383 5 жыл бұрын

This was very satisfactory to watch

@goldendredger 7 жыл бұрын

Is this a climb cut or regular cut? I am using climb doing ok but trying regular cut it melts to my bit?

@WorldMachines 4 жыл бұрын

Great Video and great info I enjoyed watching keep up the good work!

@towerheist73 6 жыл бұрын

how much is the machine?

@crouchingwombathiddenquoll5641 3 жыл бұрын

Excellent demonstration, I really need to know what the part you made was for ?

@serdarcal 2 жыл бұрын

hello can you subscribe to my channel about cnc router kzfaq.info/love/TrYNQJ1w6S0omxWXZOVLxw

@mhammedmojahid1540 6 жыл бұрын

I enjoyed watching the video thanks

@AnhTuanTran77477 6 жыл бұрын

Like it. However, Phuc Nguyen I think you should think of using cutting oil.

@amazingmachines3710 2 жыл бұрын

Thanks for the video.

@markparkinson5760 7 жыл бұрын

Hi Great cuts thanks for sharing with us all Looking forwards to see what you produce next 😀 Regards Mark

@phucnguyenCNC 7 жыл бұрын

Thank you so much!

@3dprintwiz378 5 жыл бұрын

When you use double sided tape, do you account for the thickness of the tape when zeroing the machine?

@phucnguyenCNC 5 жыл бұрын

3D Printwiz _ Yes!

@midship_nc 6 жыл бұрын

Was this a shock tower for a big rc car?

@mdkeramot3385 3 жыл бұрын

good your video

@hms1688 Жыл бұрын

Good work!!! We also have rich experience in sheet metal fab, we are a strong manufacturer in China, with high quality and competitive price.

@famfilhoyt 6 жыл бұрын

Excellent idea, excellent work!!!! My Congratulations!!!

@phucnguyenCNC 6 жыл бұрын

Francisco de Assis Machado _ Thank you so much!!!

@lozza1950 4 жыл бұрын

With Artsoft do you a SD card ? And a DSP controller?