Been pulling a 15' 1560 jd no-till with dolly and yetter markers for 15 years with a 4430 no problem at all. It will put seeds in to concrete. It flattens the stalks out great! You will love it!

I love my 750. I've pounded a boat load of crop into the ground with it. Keep the maintenance up and she'll go the distance

Nice!!! That's really all that I can say Jon... There are no rentals around here, we borrowed one for a few years, spent enough repairing it every year before we could use it..😂🤣 The owner sold out and moved out of state, would have loved to have been able to buy it, but.... It was a 12' great plains. Lifted nice and high!! We put swather tires on it for floatation.. you know you are stuck, when the drill is raised all the way up and the openers are still in the ground!!!

We just picked up an 1860 no till air seeder for what we thought was a a steal. Bought it again fixing the row units Haha. All new blades boots firming wheels gauge wheel rubbers and bearings firming and closing bushings and all seed tube hoses. But it should last us a long time. I better not show you any video of us using it on our well tilled soil lol. Goodluck looks like a nice drill. Ps I'm sitting here in the digger tractor at 3am going back and forth dreaming about no till 😂

Very nice purchase Jon! That’s going to be so nice having your own. I’ve been looking to but just can’t get myself to spend the money

Great purchase. There tough to find! I just bought a 20 footer down here in Southern Minnesota back in March. Used it for soybeans behind a 4755 and it worked great. A little tricky getting the seed rate set a first

I bought a 750 last year and I love it. Used it for cover crops last fall and oats and soybeans into cornstalks this spring. Worked fantastic. My 1086 pulls it no problem. I bought the drill I did because it has a lot of Needham Ag parts - good upgrades. I'm not too far from you - Princeton - if you want to check out any of the Needham parts.

Still can't believe you didn't swing by so I could drool over it being you drove right past here! Glad you added a nice drill to the machinery line up Jon

Looks great. Just finished instilling all my beans. It took a little bit to get 7se to what way would work best for me. But did a great job. I really like the Marten closing wheels I got from Needham. They did a great job closing the the seed in all ground conditions. The OEM was noticeably different and left it open in wetter areas like the grassy field. The V8 firming wheels did get in the trench better. The 8300 drill I traded for this one was able to set the seeding rate up way more precise. I do need the info on setting up the seeding. On the left side it planted 230k and the right side was 190k. I was shooting for 180k. Tinkered with it to shoot for 150k to finish and not run out of seed. Other then that, I loved it.

These are great drills. The only thing missing from yours is the grass seeder. I wonder how much it would be to add one. My 4020 dualed up pulls it just fine but I really liked using a 4250 power shift especially on those chilly fall evenings drilling wheat after soybeans.

I bought a 750 last spring and really like it.

Yes! We ended up getting a 107 haybuster which works fine but I am hoping one day we can justify a John Deere. Everything I have seen and read make it look like they are the cat’s meow. Can’t wait to see it in action!

Looks like you got a nice drill there Jon !

Now you got to give us some specifics! width, row spacing? Etc get that drill tuned up right, get some good no-till coulters on it and instead of tillage, You will probably find much like I did... why not just take the drill out and put some cover crop in while you're doing your "no till coulter tillage?". Those fluted coulters chop up residue and flatten a field out better than a disc or a field cultivator on most days. So why not plant a little legume or rye or cover crop while you're out dragging a piece of equipment across your land? Cover crops and soil health fit like a hand in a glove! The more you use that drill to establish soil aggregate and cover crop roots, I think the more you will see less need for tillage and more and more need for no-till grain drill. Good purchase! I look at our drill as one of the most important pieces of equipment on our farm, are drill enables us to plant our own nitrogen in the event we ever have a massive nitrogen shortage, our drill allows us to plant cover crops so we can plant green and crimp with the planter for weed suppression in the event we ever have a massive herbicide shortage. A good grain drill is what every good prepper farmer should have! Lol

My 1590 has the front dolly wheels they’re nice unless you get into a soft spot then they absolutely suck because they just start plowing

The closing wheel that John Deere placed on this drill is awful. I found that the best thing was to junk them all and update with Shoup.

My problem Jon is I love buying stuff. Paying for it is sh1ty part lol. Boy you do know those drills inside and out. Nice drill. We have a great plains. prolly never heard of them. Take Care

I hate to admit my 750 drill has been great..did J,D boots and baldest two years ago..put new bolts in with boots tighten it up good..bought turf tread for front roll better in mud..

mine was delivered on a goose neck and just removed hitch and tires love the deere no till drill.

Nice drill, I have used a 1590 to plant soybeans with. Is that a 15 ft? Hard to till in the video.

Before we had a drill we wondered if we needed one... Now we have owned a drill for a few seasons it's one of the most important pieces of the puzzle to regenerate soil health through cover crops. I have found my drill runs everyday in the spring that it possibly can and every day in the fall that it possibly can. What other piece of equipment can you say that about? soon you'll be more concerned with getting off your combine so you can hop on that drill and chase the combine behind soybean harvest! Austrian winter peas right behind a soy bean combine is a winning combination for the next years crop. Looks like that's a 17.6 footer? You're going to really enjoy the savings on cover crops as you can cut back to about half rate and get better than the same result utilizing the spreader

Nice drill Jon . 4430 alto pull it just fine . One our customers had one he pulled with a 4240

That's a good drill.

Nice clean looking machine. Yes they pricey still bringing 25000 up here. New 1590 80000. You would have to pound a pile of pavement to make new one pay. If you could mount a wavy coulter in front they would be even better. Most up here use a Salford type machine in front.

👍👍

Looks good. Definitely want one. This one I've been renting can be ruff to get a hold of sometimes plus only being 7 ft takes a while.

Hi. Did they make the 750 with small seed boxes

Nice same as mine only better looking my serial number is 609 Put lots of new parts on it sure does work nice

Dam man nice machine. Remember we're friends 🤣 well maybe I think😬 good looking unit man. Congrats.

We had a 1590, went to a Sunflower, very happy with it.

The adjustable depth control on the newer models is a lot easier, but the 750 is a solid drill!!

Now, I know when I move up there who can do my custom seeding. Hopefully you'll have seeds for sale.

John Deere 1590 can’t beat it

Hope you are going to put it under a shelter. The life of any planter especially a drill is keeping it sheltered.

I hit the shoups 10 percent off in February and keep some needham firming wheels, a couple updated closing arms on hand. I put the shoup boots on wich was a mistake, a couple of them the mounting holes weren't straight and they didn't ride flat against the blades, quality has gone to crap at shoups on some stuff. A guy looks in the parts books and everything is ×24 wich is painfull, so I just did the boots and mounting hole bushing and blades and everything else as they go bad.

Wait, just because ryan didn't want to no till alfalfa you didn't consider a Kuhn? I would have been out on kuhn cuz it's probably twice the price of the one you bought lol

Hi Jon, weird question, but could I come by and get the length height width of the 750 from ya? I bought one online kinda a ways away and am having a time trying to get it from the dealer for whatever reason.

Last week there was a 30 foot deere seeder someone made with 7000 units on 8" spacing with a gandy air box on it went for 3500$ close to me. A little to big for my little dab but would if been dandy for you other than hauling probably 600 miles. Lol

I doubt you actually picked it up. Probably just used the hydrolics to lift it .

Always though those 750s were great. Why did Deere change all their numbers on the new ones.

What tractor you gonna use to pull it?

No one renting no tills in my area and used once 8h away

Hi..Did u used to work at a jd dealership?