You might know this lock from • (picking 602) ELCA Eur... where I picked and gutted it. In this video you see how I put it back together. have fun - it's not so difficult if you own a plug follower with a slot and a pinning shoe.
Пікірлер: 107
@Potti3145 жыл бұрын
You might know this lock from kzfaq.info/get/bejne/kKh1Z6ly29LHpqM.html where I picked and gutted it. In this video you see how I put it back together. have fun - it's not so difficult if you own a plug follower with a slot and a pinning shoe.
@hamidhamid4100 Жыл бұрын
البحث في العناوين والنصوص
@raulrojas6520 Жыл бұрын
😅😅0😊
@josetrinidadromero77059 ай бұрын
@@hamidhamid4100. De
@PocketWomen5 жыл бұрын
Very interesting tutorial. I've always wondered how the two sides were done at once. Thank you for doing this video, cheers
@Potti3145 жыл бұрын
Cheers mate, glad that the video was helpful.
@LockNoob5 жыл бұрын
This will be an incredibly useful video for many many people. I’m glad you did this without a front loader too :-)
@keithroberts59465 жыл бұрын
where can i get a front loader from - I have seen them in use but cant see when to buy one
@Potti3145 жыл бұрын
Thank you mate - the front loader is great if you don't wanna gut the other side.
@Potti3145 жыл бұрын
I found something here thinkpeterson.com/universal-top-loader-in-a-tube/
@keithroberts59465 жыл бұрын
shipping to the UK is expensive - total for tool and shipping is $87.00 - can't afford that for a single tool If I can find a similar tool for less
@Potti3145 жыл бұрын
It was just an example, foxxxy has 3d printed it. Others have also made them themselves from sheet metal. Or maybe another commercial source has them also. Good luck.
@JasonCarlson5 жыл бұрын
First time I have ever witnessed this full event! Thanks for the demo!
@Potti3145 жыл бұрын
Haha, glad you had fun :-)
@john.apricot2 жыл бұрын
You saved my life! I messed up with an euro cylinder like that one but now I can fix it. Thank you so so much!!
@Potti3142 жыл бұрын
Glad the video was helpful.
@odinslockllc2 жыл бұрын
Great video. I had one today that required the front loader tool because the thumbturn side was not removable (without drilling), and your spot on about those cam pieces being different designs. Definitely need to pay attention when pulling apart so you know how they go back together. Thanks for sharing!
@Gazz_R5 жыл бұрын
Fantastic tutorial Potti. Thanks for sharing.
@Potti3145 жыл бұрын
Cheers buddy and thanks for watching.
@CameronDunn5 жыл бұрын
Excellent walkthrough. I've always been hesitant to gut full Euros, but you made it seem easy.
@Potti3145 жыл бұрын
Thank you - this one was easier than the average but you need to try it yourself to gain experience ;-) It's just pieces of metal, not a piece of art ;-)
@Leonslockpad5 жыл бұрын
Very cool video my friend very nice fun to watch👍😊👍😊😎😎
@Potti3145 жыл бұрын
Thanks buddy, glad you had fun watching.
@62Cristoforo5 ай бұрын
Very helpful. Exactly what I was looking for.
@Mur-lock685 жыл бұрын
Excellent Video Sir! Very Well done! The pinning shoe really works here! thanks!
@Potti3145 жыл бұрын
Thanks a lot - glad the video was helpful.
@jokeeffe0075 жыл бұрын
This was a great video. I'm from the US and have reassembled many locks but never the Euro cylinders. It's the part that everybody skips on the videos because it's not sexy. Thanks for publishing great content!
@Potti3145 жыл бұрын
Thanks, glad you liked it. For me it's part of the fun to get them back together.
@clarencelthorpe3143 жыл бұрын
Excellent vid. Answered all my questions. Thanks
@Potti3143 жыл бұрын
Thanks for the kind feedback. Appreciate it.
@moturist15 ай бұрын
This was very helpful! Thank you!
@abdallaelhagef10905 жыл бұрын
Thank you for this video and I hope to make one about built cylinder and pin &pin tumbler thank you
@Potti3145 жыл бұрын
Thanks, I'm subscribed to get notified once you upload.
@keithroberts59465 жыл бұрын
Great video - very useful to know how re-assemble - most videos show how to gut a lock but not how to put it back together - especially if it is a double sided euro lock
@Potti3145 жыл бұрын
Thanks. Glad you found it useful - it's part of the fun to to get them back together ;-)
@WilliamMancel5 жыл бұрын
Thank you for doing this video my friend. I have a full Euro now, and it's nice to see how to put one back together. I've watched other videos on how to do this, but none recently. I have all the stuff to do it, just never got around to doing a full Euro.
@Potti3145 жыл бұрын
Thanks buddy and good luck, just give it a try. I can send you plenty of euro lock when you mess up yours ;-)
@chriscapune78735 жыл бұрын
Very good information!! Great video!!!
@Potti3145 жыл бұрын
Thank you, glad that it was helpful.
@aszabolcs13 жыл бұрын
Thank you for shared!
@TheIronHeadRat5 ай бұрын
Thanks for sharing 👍
@John-kb9im3 жыл бұрын
Thanks for sharing.
@ahmedabdullah6778Ай бұрын
Thank you, wonderful
@scottmcgregor158 Жыл бұрын
Great video, I have been struggling to pick a full Euro cylinder lock,and would like to strip it down and reassemble it ,using only the key, (without having to pick it) thanks for the information
@colin.charbel Жыл бұрын
Hi, would you use the same method if there were a ton of security pins in there?
@gregtunston51625 жыл бұрын
amazing thank you for sharing
@Potti3145 жыл бұрын
You're welcome - glad you stopped by.
@lockmania-locks5 жыл бұрын
Very cool, i have had hard time with these euro cylinders
@Potti3145 жыл бұрын
Thanks, many other euro locks are harder because of the cylinder length and different cam mechanisms - it's part of the fun ;-)
@lockmania-locks5 жыл бұрын
@@Potti314 yes it is, i myself strugle a bit with my ruko's but i don't have the right tools yet, but the padlocks and mailbox cylinder's are easy
@bhaveshpatel32992 жыл бұрын
Hi I was wondering were you got your spring holder from
@azezzakary4876 Жыл бұрын
Good job
@curthatt64615 жыл бұрын
Great video.
@Potti3145 жыл бұрын
Thank you.
@paulb97694 ай бұрын
How could you change the combo to change the lock. How would you match a new key?
@mounirellouze91288 ай бұрын
Merci c'est bien expliqué .
@naseemkhan76459 ай бұрын
Very good tring
@ahmedabdullah6778Ай бұрын
Excuse me, where can I buy the kit I used in the repair?
@rikovaldi Жыл бұрын
nice good job
@youcefgheddari84002 жыл бұрын
Woooooooooow Very very very gooooooooood
@joshuag.newsteder628425 күн бұрын
What happened to the single ball bearing please?
@tayebgattal-pl9fw3 ай бұрын
شكرا
@molnarrobert18933 жыл бұрын
I did it without any specialized tools,only a flatened spoke and grease to hold the pins.
@drisdris1461Ай бұрын
فكرت رائعة
@dkeisk Жыл бұрын
Would you give links Where to buy a pin kit in Europe?
@israelthomas51187 ай бұрын
Please how do I get the follower and pinning?
@tamersaab5433 жыл бұрын
Nice
@Potti3143 жыл бұрын
Thanks.
@EnzoGuardino5 жыл бұрын
Exceptionally clear and educational tutorial! I've got the locks, just need the tools, patience and a little prayer to gut them. 👍 Is the pinning shoe you used homemade? I'm curious to see if I can make something similar from my "scraps" collection. 🤔 I really need to get my hands on Dremel type tool.
@Potti3145 жыл бұрын
Haha, don't pray too much, just try it. Old euro lock are not hard to find and are cheap. I've messed up one or two but that's part of the thrill ;-) Have a look here for a home brew pinning tool kzfaq.info/get/bejne/gbZdbLaVsM_Sqnk.html It's made from a windshield wiper blade.
@ebra5919 Жыл бұрын
بسیار عالی 👏👏👏👏
@nihatsavmaz66775 жыл бұрын
super potti. du bist mir eine super hilfe.
@Potti3145 жыл бұрын
Vielen lieben Dank. Klasse, dass ich helfen konnte.
@sayafahmed1169 Жыл бұрын
Gooood
@user-bo7lm7nj4d Жыл бұрын
فنااااان
@hussainzid4892 жыл бұрын
Goooood
@tinisuhartinitini-ph6dg5 ай бұрын
Mantap coy
@jacintovillarreal55822 ай бұрын
Los vidio con traducción al español 👍 Sería muy bueno
@antonio283603 жыл бұрын
exelente tutorial hola hermano
@Potti3143 жыл бұрын
Thank you.
@antonio283603 жыл бұрын
@@Potti314 esa herramienta ke metes dentro del cilindro es de que medida es de 1/2 pulgada
@hiltihome4 жыл бұрын
Is this pinning shoe home made? Where to buy? (mine is inferior...)
@Potti3144 жыл бұрын
It's from a locksmith but they don't sell these anymore.
@Evodem105 жыл бұрын
Hello! What kind of nipper I can use for reinstalling the clips?
@Potti3145 жыл бұрын
With the spring steel clips it's easy kzfaq.info/get/bejne/rtOZZsKC3NXVmn0.html But for these bendy ones, special pliers exit. But I'm not possessing these pliers so I'm just using two small screwdriver to tighten the clip.
@Evodem105 жыл бұрын
@@Potti314 Ok, thank you! ;)
@danieljackson45113 жыл бұрын
Wo bekommt man die C-Clips für Profilzylinder her?
@Potti3143 жыл бұрын
Habs immer aus alten schlössern ausgebaut.
@devarajang5488 Жыл бұрын
Except the tamil lagunitas sir thanks
@user-kz1zb4ht4b2 ай бұрын
Дуже корисні приспособи, буду знати, як зібрати сердцевину ключ-ключ. Дякую вам.
@obijanjebrave5 жыл бұрын
To bad that rest of manufactures does not use spring steel c-clips. Nice work :-)
@Potti3145 жыл бұрын
Very true; these spring steel clips are very easy to handle but most likely a few cents more expensive.
@creatorid351 Жыл бұрын
Ini yang gua cari
@joseluisameal91033 жыл бұрын
6 pin repinning where you can buy
@Potti3143 жыл бұрын
Check HUK, Sparows and Peterson.
@user-fr8yr6sd6z2 жыл бұрын
هل البليه لها وضع ام عشوائ
@mdshorif-dz6qp Жыл бұрын
6:35 tools name pls sir
@ashrafibrahem8318 Жыл бұрын
Mona Salama
@abdel-hadikaddourn2bricola725 Жыл бұрын
شفت جنون تاع المفاتيح كيفه إديمانطي
@Potti314 Жыл бұрын
Thanks for watching.
@stevenevin9003 Жыл бұрын
I would like to send you a pic and see if can give me some advice?