Picking the Right Suspension System
Рет қаралды 11,192
Жыл бұрынWe've just released our all-NEW Double Triangulated 4 Link Suspension Mounting System for Jeep YJ/TJ/LJ (#MB7009) and we've had some questions about difference between this double-triangulate kit and our 4 Link Suspension Mount Skid System for Jeep YJ (#MB1503). Are we phasing out the original system? No!
Listen as Rob 'Bender' Park explains the differences in these two suspension kits and why you would choose one or the other, based on what you're looking for and how much modification you want to tackle.
#iknowbender #jeepyj #jeeptj #jeeplj
motobilt.com/products/jeep-yj...
motobilt.com/products/double-...
@jried9378 Жыл бұрын
Black Friday can’t come soon enough
@Motobilt_inc Жыл бұрын
Black Friday sale starts Monday!!!!
@brisonpalmer6730 Жыл бұрын
Awesome stuff guys 🙌
@alex--pw3gw Жыл бұрын
Made new video with your new product it’s great for beginner 👍🏻
@Crakheadzombie Жыл бұрын
We need more vids like this for us not to sure what to get guy ……
@Motobilt_inc Жыл бұрын
If you ever need help you can reach out to us and we'll be more than happy to answer any questions about our products you might have.
@saintb6969 Жыл бұрын
I ordered the new kit but I am now concerned about the front drive shaft on the fro for a YJ with 05+ Dana 60 up front with a 5.3 LS?
@gatekeeperoffroad Жыл бұрын
Iv installed the old style on 2 rigs and ill say its rad. When you use one tons with the old setup on a TJ/LJ an intermediate drive shaft is absolutely necessary. Great kit, would definitely use again. I kinda want to try the new setup for my personal project....
@rubberduckyTJ Жыл бұрын
Installed one of the old kit, intermediate shaft not necessary….. Now maxed out driveshafts due to shorter upper links? That was an issue. Lol
@gatekeeperoffroad Жыл бұрын
@Ryan Cranfill with 1 tons? 05+ supers? Thats what i used and the front upper link bracket was in the way. No way to run a 1 peice. Also.....118" wheel base. I didnt have any issues with drive shafts maxing out, running 18" ADS air shocks.
@rubberduckyTJ Жыл бұрын
@@gatekeeperoffroad Yup. Tj with super duty axles, 14" ORIs. we did run a three link up front. cut off the upper link bracket on the driver side, plenty of room for driveshaft. rig was a fair bit shorter, 103" IIRC, which didnt help on the driveshaft angle. This rig was stretched more in the rear than mine, but driveshaft bound still (mine doesnt, but my uppers are longer than lowers.)
@gatekeeperoffroad Жыл бұрын
@@rubberduckyTJ ahh yes i was 4 link front and rear. And there was no getting around that upper link bracket. 103" on supers seems awfully short!
@rubberduckyTJ Жыл бұрын
@@gatekeeperoffroad Little stubby for sure, but customer wanted to keep stock steering box, and a fuel tank. i did the same on my first build iteration, and was even smaller at 101" LOL
@Nik-ok9nu Жыл бұрын
Can either/both be made to work on a CJ7? I haven't looked to see if these are application specific or universal.
@Motobilt_inc Жыл бұрын
This will not work on a CJ the frame is more narrow at the front.
@FlawedOffroad Жыл бұрын
Front driveshaft gonna clear with the new kit?
@Motobilt_inc Жыл бұрын
All depends on your drive train, wheel base, height, etc. On our YJ it was as we are running a 14 bolt front so the pinion is really low.
@FlawedOffroad Жыл бұрын
@@Motobilt_inc ive got the older style d60 high pinion going in(78 ford) with the pumpkin closer to the center than a super duty.(currently have the same style 44 in there but its getting swapped for the 60) Do you have any pics of how you cleared it with intermediate shaft?
@saintb6969 Жыл бұрын
Yes I ordered the new kit but I am now concerned about the front drive shaft on the fro for a YJ with 05+ Dana 60 up front with a 5.3 LS?
@acidface624 14 күн бұрын
@saintb6969, did you end up running intermediate driveshaft ?
Offroad Addiction OKC
Рет қаралды 6 М.
ОВР Шоу
Рет қаралды 7 МЛН
Muddy Beards 4X4
Рет қаралды 338 М.
Тетя Наташа
Рет қаралды 606 М.
Ivan Ivanov
Рет қаралды 1,5 МЛН