No that price is for the door itself. Manufacturer says most people choose to install themselves but they do have options for installation of needed

Weird seeing you here Thio

@@PilotPatriot A mighty heavy Door 🚪

did you do it?

They would recommend some type of ventilation or a/c

Well of Coors . You construct it the way you want . Maybe even an Escape Exit !

Lol well it's 2 layers of 10 gauge steel. But yea of course any door can be cut through if you have the proper tools. I'm sure you have a door with 1/2in of hardened steel...I'm sure you also took out a second mortgage to pay for something like that!

@@PilotPatriot exactly, plus hiding the doorway would go a long way, the most secure safe is the one nobody knows exists

I agree, 10 gauge is no more protection than a steel service door. This $2,300 door is just like all the other “safes” that give you the illusion of safety. I own a Champion, and will be using a Ft Knox door when building my gun room.

@@penniesfromheaven2511 I agree! I have an Amsec BF2 series and I have high piece of mind that my stuff is protected. It would take a crook a ton of work to access it. Not like this cheap crap from box stores. Most safes are pure junk. Fort Knox, Amsec, Brown safe, etc. are the only way to go. And hell, if you’ve got the coin, drop it on a Grafunder!!

@@PilotPatriot exactly

Don't know how long it would take you to hammer through solid filled and rebar reenforced block...but I don't think it would be that easy! And certainly more difficult than 2x4s and sheetrock! And the chances of them having a sledge hammer with them and time enough to break through without getting shot.....slim

@@PilotPatriot O I didn't know it was reinforced with rebar and fully filled with concrete! Great design! I hope to have a room just like this in my home one day! I enjoyed the video!

@@Mott2 Yeah they did a great job with this setup! Thanks for watching!

@@PilotPatriotI was a Mason for 9 years. Cinderblock walls are not normally filled solid and dont have rebar throughout the entire wall unless special requested. They will have this tiny thin steel every so many block layers. It would take me about 10 minutes with a sledge to get through a normal cinderblock wall, maybe faster. I'm pretty certain a cutting tool can get through the door. You need 1/4 inch steel plate minimum to slow down cutting tools and force them to use a torch. While this door is better made than alot of safes it still gives a false sense of security in my opinion. Theres a company in Florida that makes a safe that hands down has a better door than this in every way for a similar price. If they can make an entire safe with steel plate this company is ripping people off with 10 gauge steel.

@@outdoorsliving464 Your key statement there is unless special requested...of course if you are building a room like this it makes since to request your blocks be filled and reinforced! This door display was built by the company with that in mind and it's also recommended by the company for it to be done that way! Please note that this door has 2 layers of 10ga steel not just 1. Also as I've said many times on this video and in other safe reviews...all doors can be compromised if you have to proper tools to do it. I garantee 99% of your home invaders do not carry along a grinder and cutting torches or a sledge hammer for that matter. They are smash and grab incidents , in and out in 10 minutes or less. As another commenter pointed out you also have to find the door/safe before you can ATTEMPT to break into it! I'd love to see a link to this safe that is so much better for the same price! Id will admit, I won't believe it until I see it! There are of course better safes/doors out there but are usually all thousands and thousands of dollars more expensive. Thanks for watching and you bring up good points! Don't forget to request that the wall be reinforced folks!!

Exactly! Someone could barricade you in or a storm could cause the house to cave in blocking you in.

@@PilotPatriot makes sense!!

An out swing door on a safe room in your basement turns into a mausoleum in a storm when your house collapses into the basement. Hard together out.

The review is of the door not the room but of course you are right. Did you miss the part about it being a solid filled and rebar reenforced concrete room ?

Yes they do, they extend past the frame so you could just pull the door from the frame, they don't have to retract like the other side though

They are solid steel

You are wanting to build a vault?

They make this same door as an In-Swing door, not sure what the difference in hinges is. The reason I say an In-swing is ideal for a shelter is because nothing can block the door from opening if it is an in swing....you wont get trapped inside if the house collapses in front of the door

Call a locksmith

You think the average smash and grab criminal is gunna get through 8in of solid concrete in 10 minutes???? With what?

You'd definatly want to beef the frame up! Maybe six 2x6s nailed together on each side and nice heavy duty header!

@@PilotPatriot yes I’m Sure !!!!!

Solid, filled and rebar reenforced concrete wall?? Good luck! Lol

This room was, yes

????

I think you are underestimating the blocks!

It's welded metal. You will be ok with the lever.

Your are correct! But The walls, floor, and ceiling of this room are solid concrete ! 😉

😱 FAIL 😱 You simply bash your way through the cinderblock wall in under a minute. Need 18-24” cement with steel rebar reinforced walls and ceiling to resolve this. Even then, cement crumbles when hit repeatedly with a sledgehammer. Need steel plating all the way around within the cement itself.

Always need to keep guns in your room as well tho. Just saying

@@ericcalabrese8716 of Coors

Lol if you punch through this drywall you will hit 8" of solid concrete....

@@PilotPatriot I would say the vast majority of American houses have internal drywall. You would need to have your room built with concrete blocks for this to be worth it

@@humphrey4976 duhh! Lol. If ur gunna install a door like this you obviously need to beef up walls too! You could build concrete wall inside the existing walls, or use a couple layers of plywood instead of sheetrock, you could use metal sheeting, of course the best scenerio would be to build it out during new construction with concrete or steal. But I'd think most people considering a door like this would realize they need more than sheetrock.

Whats wrong with exposed hinges?

@@PilotPatriot Because they're easy to access if someone wanted to really get inside your room

@@jaipellegrin3526 Cutting off or tampering with the hinges would do nothing to give you entry to the room! When locked The door has 14 steel 1.5in thick locking bolts extending beyond the steel frame of the door on both sides!

@@PilotPatriot Then why do other top manufacturers of top tier safes and Vault doors. Have swig in doors and not exposed hinges then?????????????? I build and design things for a living there are always 2 ways to do something. The easier way or the most structurally sound way.

​@@jaipellegrin3526 LOL They make in-swing doors because in-swing doors are less likely to trap you inside in the case of something blocking the door OR just because in-swing makes more sense for certain specific applications. Homeland makes both options! This one is outswing because the room behind it is small and an inswing would take away the usable space inside. Interior hinges on outswing doors give a cleaner look but don't allow the door to open a full 180 degrees and take up part of the doorway so you don't have a true 36" opening to walk through. There are great reasons for both in-swing or outswing and exposed or interior hinges, each has its own merits for different applications but regardless, your first point is incorrect... none of these options affects the ability of someone to gain entry by tampering with the hinges since on all models the locking bolts are inside behind the frame. Since you design and build things for a living I'm sure you know there are many ways to build something based on the specific application needed, but that doesn't mean one is structurally inferior to another. Thanks for watching

The wall is solid rebar reinforced concrete behind the sheetrock

Cheaper??? Any safe you buy that's cheaper is not going to have a 36"x80" door with an inside latch...or a steel frame to attach to the wall. Lol. But...if you wanna buy a cheap safe just to cut it in half and crawl through a small door with no frame and no way to latch or unlatch it from the inside.....👍

Sooooo I guess you missed the part about the walls being solid filled and rebar reenforced ???? Also, the door is perfectly balanced, no uneven weight. With that said, This video is about the door itself, not about the construction of the room it's installed in. That's up to the customer