Pin Cam Bearings with ONLY Hand Tools AT HOME! Manual Machine Shop

Pin Cam Bearings with ONLY Hand Tools AT HOME! Manual Machine Shop | Brand Racing Engines

Рет қаралды 59,121

Жыл бұрын

Thank you for watching! Please Like the Video and Subscribe for the next video!
Sorry I didn't get a good video of the drill jig install on the block. i will put it in the next video.
If you would like to work with me, please email BrandRacingEnginesYT@gmail.com

Пікірлер: 213

@edwinyoung2719 Жыл бұрын

I’m loving seeing these old school simple fixes …

@stevewelborn8744 Жыл бұрын

I just wanted to comment that I've been a cylinder head guy for about 45 years and worked at 3 different shops. Man your pretty sharp and I've found your videos helpful. 5:17

@ModernDayTemplar606 Жыл бұрын

Definitely a LS game changer. Very smart Mr Brand.

@BenjySparky Жыл бұрын

Gerald and Ruby y'all rock! Love all that you do for us to learn from! Peace

@spy44yogi Жыл бұрын

Love the videos! Always informative with all the little tricks people don't think about. Thanks so much.

@Windemtight Жыл бұрын

Great tip and great builder for sharing his tips. Thanks

@prozeke07 10 ай бұрын

Just finishes making my jigs and first block, easy, once the jigs were made and a solid piece of mind. Thanks for the video.

@Mr688895 Жыл бұрын

Very impressive repair. Always informative videos as always. Look forward too many more. Thank you for the time and instruction.

@zenrill8723 Жыл бұрын

Never owned an LS but Im glad I watched this just in case I ever do. Love the videos!

@GrandPitoVic Жыл бұрын

Brother, this is great info. Thank you. This would save a lot of blocks if more shops would do this.

@yattaran1484 Жыл бұрын

Thank you for posting every interesting videos. So glad to know small improvement makes big change !👍

@Hogiewan1 Жыл бұрын

I’ve never seen anything like this done. Thanks for sharing!

@Scubasteve22 Жыл бұрын

Your a good machinist/engine builder! Thanks for posting

@michaelmorgado Жыл бұрын

Brilliant!! I really hope that you are enjoying making content for your chanel Mr Brand, because you are a natural at it. Thank you.

@firstdaddy Жыл бұрын

Loctite 620 retaining compound gets the same job done without all the hassle. Never had a cam bearing spin.

@aaronward3882 Жыл бұрын

Have you checked the inside diameter of the bearings after the compound sets up?

@valhallabjj1032 7 ай бұрын

it goes on the outside not the inside of the bearing @@aaronward3882

@kevinwest3689 7 ай бұрын

My Engine has 300,000 miles. It's definitely do for some cam bearings. I wonder if it will make it another 300,000 without this trick? Hell I probably won't last another 300,000. I let the next guy worry about it 😁

@adammanuel4448 3 ай бұрын

He is right loctite them in all my burnout engines are the same never spun a bearing

@Johnny-jr2lq 3 күн бұрын

@@adammanuel4448are you talking about putting lock tight on the OD of the bearing itself. Because I have the same question

@gregivey183 Жыл бұрын

Outstanding attention to detail..my ocd loves the series..👍

@efrainromero4024 Жыл бұрын

Good job Mr Brand, you are the best in what you do, GOD BLESS YOU

@RAYROTHSTEIN66 Жыл бұрын

A old school bit brace, yes like grandpa used to drill holes is really nice to drive taps in smoothly and straight.. plus it's set up for square drive and has a pad on top to hold it straight and keep pressure on it.

@BrentAllen99 Жыл бұрын

Great Video!! That's a nice trick for the LS crowd

@morainemammoth Жыл бұрын

Nice work! Nice solid cam bearing installing tool, the universal adjusting ones don’t cut it. I used to have the Winona Van Norman cam bearing installer with about 30 different-size drivers.

@rolliefoster2837 Жыл бұрын

...that's just pure genious, right there - thanks Gerald !...

@jamesgeorge4874 Жыл бұрын

Just found your channel, lots of cool insight, no nonsense.

@ClimptonDiddlehopper Жыл бұрын

Thanks Gerald I've avoided rebuilding LS and just kept buying used as I've seen so many rebuilds cam bearrings fail soon after replacement.

@charleskeenom9481 Жыл бұрын

Glad to know someone figured it out thank you for the video

@GPSPORT71 Жыл бұрын

Clever, awesome tips. I can only imagine the tap breakers out there tho..,😳🤯😱

@freddiemoralez1536 Жыл бұрын

🎉🎉 I DIDN'T KNOW THAT I COULD DO THIS 🎉🎉😊 THANKS MR BRAND.

@brracing7861 Жыл бұрын

Nice fix. I have seen dozens of spun LS Cam bearings myself.

@RallyBullRaul Жыл бұрын

Gerald & Ruby.... Thank you for this info, Love your content, Will be using this for sure.

@kevinpalmer2975 Жыл бұрын

Awesome work as always Mr B

@edsmachine93 Жыл бұрын

Very good tip Gerald. Thanks for sharing. The only ones I have had spin was #3. Usually the cam bore id still good. Thanks for sharing. Take care, Ed.

@BrandRacingEngines Жыл бұрын

Thanks # 3 80 % of the time

@dbriggs1689 Жыл бұрын

I can't get enough of this channel. Have you got any videos or plan to make any working on a 385 series 460?

@joshuahonel7321 Жыл бұрын

Always love seeing your videos

@ronthepainter3313 Жыл бұрын

Love it. A simple solution to a common problem.

@_the_Chad_ Жыл бұрын

Excellent video! Thanks for sharing

@freddiemoralez1536 Жыл бұрын

🎉🎉JUST LITTLE THINGS THAT MAKE THE DIFFERENCE, BRAND TAKES PRIDE IN THE WORK AT HAND. (NICE) 🎉🎉😊. GOD BLESS ALL.

@arturozarate1752 Жыл бұрын

That's BADASS Mr. Brand!

@MrVelocity111 Жыл бұрын

Looking good Gerald

@Sleeperdude Жыл бұрын

Very interesting. Thanks for sharing

@H3110NU Жыл бұрын

Neat! I didn’t know this was done .

@Headsup9550 Жыл бұрын

Great topic for a video! I really wanted to do this to mine but no local shop were comfortable doing it!

@BrandRacingEngines Жыл бұрын

It's not a big deal to do.

@davepotanko5514 Жыл бұрын

@@BrandRacingEnginesI think this sums up among other reasons why we watch. Thank you

@bobwas4066 Жыл бұрын

Awesome! can you show us how you made your cam bearing installation tool?

@MrWill73 Жыл бұрын

Great video Gerald! Super interesting!

@RonaldLewis-py6yt 20 күн бұрын

Had a come back ate #1 exhaust push rod can't see anything wrong makes me wonder if cam bearing might have spun,Thinking I need to inspect future ,very helpful 🤔

@mikemaccracken3112 Жыл бұрын

Great video Gerald! I have noticed the front cam bearing to be the problem child on the LS platform. Sadly most of the automotive machine shops in my area have gone out of business and all the new ones have mega overhead cost which makes it unaffordable.

@mezeerick84 6 ай бұрын

Hey what part of the country u located at? In Philly lots of machines shop r out of business as well

@robertrenta Жыл бұрын

good video thank you keep up the ls stuff

@patrickwendling6759 Жыл бұрын

Thank you for your knowledge and videos USA 🇺🇸 USA 🇺🇸 USA 🇺🇸

@jeanlawson9133 Жыл бұрын

Awesome 😎 if there is an existing problem,,,and way too solve and or prevent said problem...By all means do so.. Awesome stuff....the only way it should be done. thanks

@aascher4039 Жыл бұрын

Nice work!

@Ab.thebarber Жыл бұрын

Another great information video

@danieljones685 Жыл бұрын

Great channel all content is very helpful

@KakinoHorsepower Жыл бұрын

Already at 12k subs badass man🤘🤘

@saddletramp1979 Жыл бұрын

That intro is just fun.

@glennborek2359 11 ай бұрын

Great video , and great idea pining the cam bearings , there’s a lot of speculation out there why the Ls motor spins cam bearings but no solid reason why. I was just looking at a LS oiling system diagram, and I see the oil galley that feeds oil to the cam bearings runs along side the cam bearing journal and then to the mains ,, and not directly to the cam bearings like a Gen 1 sbc. say you have a high milage LS with loose main and rod bearings, it looks to me the oil would leak out the loose rods and mains and preventing it from building enough pressure to feed oil to the cam bearings ?? I could be wrong , what’s your opinion why they tear up cam bearings ??

@bigdummy240 Жыл бұрын

Great job!

@justinshearer3016 Жыл бұрын

ahhhh....so thats how you do thaaat....nice job geraldo

@BrandRacingEngines Жыл бұрын

Just more voodoo

@michaelwynne4346 Жыл бұрын

Knowledge is Power.

@ronflood5697 Жыл бұрын

Good alternative to correcting the bores if it works in a bind. . We just index/bore/hone them all for the CHP-25R1 oversize bearings. We won’t machine a block without doing this as part of the process.

@warriorplutotrent3827 7 ай бұрын

Why do these spin cam bearings? Especially the 6.0

@shadetreerestorations9053 26 күн бұрын

if you have a chance on ur next video if u do another cam pin can u show us how you drilled the those for the middle 3 cam bearings

@michealwriska2920 Жыл бұрын

Dam mr Brand u a bad ass that’s a great tip

@RGCJ8763 Жыл бұрын

I've installed countless LS cam bearings...never had one spin, never seen one spun.

@jbz8117 5 ай бұрын

Your a lucky man. Ive seen countless ls cam bearings spun. Still dont know why. Other than run low on oil or over revved with just 6 qts.

@kevinwest3689 25 күн бұрын

He's not lucky. You have a lot of (all of ) the unlucky customers. But looks like you got it covered. The reason why you don't see anybody else do this, and the reason you don't understand why are one in the same. 👍

@kinotransam Жыл бұрын

Nice work good sir!!

@benrossbach6501 Жыл бұрын

Love your content. Will be usi g this for sure.

@BrandRacingEngines Жыл бұрын

thank you, appreciate it!

@earlrichardson385 Жыл бұрын

Super useful👍

@johndevries8759 Жыл бұрын

If you continue to use the same fixtures for locating and drilling the holes in the block the fixture itself will start to wear out. I'd suggest the use of a hardened drill bushing inserted into your fixture to maintain and protect the original location, available from tool and die supply houses such as McMaster-Carr or Carr Lane Mfg. Nice idea to mechanically hold the bearing in place.

@BrandRacingEngines Жыл бұрын

Thanks

@RENEGADEX800 Жыл бұрын

It's like watching a magician!

@jamescameron7633 Жыл бұрын

Nice work good thinking

@lowrangelee 20 сағат бұрын

When you drill into the center ones does it leave a rough spot or burr you have to smooth up? Or does the hole come out smooth and clean? Awesome video

@valhallabjj1032 7 ай бұрын

are the hole in the oil valley already there ? or do you drill them yoursel? how do you know where to drill ?

@richardsmith-qy6vl Жыл бұрын

Good job I'm not a ls guy but maybe one day

@Rdawg33 Жыл бұрын

Has you ever seen an issue with the metallurgy between the set screw/bolts and bearings? Is there a expansion range from heat that may distort anything or is it to small to worry about? This is a really good trick of the trade!

@BrandRacingEngines Жыл бұрын

No have had no problems with pining

@Anthony_Pell Жыл бұрын

Nice trick

@dantmanish 4 ай бұрын

Hi, Great information about the cam bearings,, I bought a gen3 5.3 ls motor and tore it down and the middle cam bearing just came uot with the cam and I had to use my dremel to cut the bearing in half ,, the journal looks ok and figured the bearing hadn't spun but the cam looks like its been heated ,, not scored just discolored at the center cam bearing .. I watched your video and thought this would be good insurance for the rebuild but this motor has knock sensors and look like its impossible to do # 2 and 4 bearings ,, am I right ? and would it be ok to do this just do the center bearing and #1 and 5?

@user-zu2ed6ye5w 5 ай бұрын

Put a paint marker on your drill bit for proper depth .😊

@jcnpresser Жыл бұрын

Have you tried Loctite 632? The green stuff, it’s made for press fit type situations. It’s worked good for me. I’ve never used it on cam bearings though. Seems like it’d be good for that, just don’t know if the oil and heat affect it.

@BrandRacingEngines Жыл бұрын

Yes Didn't like the results

@scottsmith8056 Жыл бұрын

Damn pretty simple solution!

@hockmedcamelfucker7470 Жыл бұрын

I love building and using tools I have made. Thanks for another video gherald. I think you are doing good work no matter what big CHEF says about you

@BrandRacingEngines Жыл бұрын

LOL

@Timbo428CJ Жыл бұрын

Gerald, I've never heard of that being done, seems pretty straightforward too. Has there been problems with LS engines spinning cam bearings? With your procedure, that'll never happen. 👍👍

@BrandRacingEngines Жыл бұрын

@shadowopsairman1583 Жыл бұрын

Mr. Brand I believe the way you tap the threads after helps to avoid burr introduction

@BrandRacingEngines Жыл бұрын

THANKS

@pickeringautoandperformace8266 Жыл бұрын

Thank You Mr Brand love watching your Vids so helpful old school rocks.... Do you have any content on the building of Damon Merhants engine? Sure proves old school again is the way Conven BBC out there in first place you should be so proud we alll are... Thanks again...

@BrandRacingEngines Жыл бұрын

I have it in the shop. will post it

@pickeringautoandperformace8266 Жыл бұрын

@@BrandRacingEngines Thanks Mr Brand iam 60 yrs old and have owned a Automotive Repair shop for 37 yrs , i have a couple 64 Novas one pro street and the other is still stock chassis both have 434 SBC strokers and it blows me away back when i cruised out of high school a 400hp engine was the rage today if your not showing up with a 800 -1000 hp your not going very far... I have great respect for You and all the old school mentors i have been blessed to learn from , High school Auto shop and Machine shop were so much of what you put on your content which proves corp owned Race engine shops may not treat every engine like a person like you that said have been a fan of Damon since i learned he was running Matt's Big 9 set up combined with your skill set that BBC made 51 runs , Damon released a vid Thursday while pulling the engine hoping it did not Window the block or mess the crank up beyhond repair, would love to see you show the repairs or rebuild its to me so impressive that a small home town machine shop and engine builder has built a engine combo that is beating up on engines that cost 3-4 times a BBC . Again thank you for all the educational Vids on Engine machine processes. Sound like Damon will be sticking to replacing the Aluim Rods on a maint basis from now on..Fred

@jessebrown2100 11 ай бұрын

... any experiences with Loctite, stud and bearing during install ?

@BrandRacingEngines Жыл бұрын

I will show a the drill jig installed on the block. Sorry I didn't get in that in the video.

@bigal878 Жыл бұрын

Good tip 👍🏻🇦🇺

@Bugj-cx3cv Жыл бұрын

So as far as I know all V8 engines small block Big Blocks LS is and so on all use a cam bearing. Hawaiian small-displacement engines like 4 cylinders in overhead cam engine like a 2JZ Toyota they don't run cam bearings. Now I know at times the cam cap and the head need to be line hone but that's pretty rare. Normally you can just drop a set of cams in torque it down and you're all good then you have a steel cam on an aluminum head or sometimes a Billet aluminum cam on aluminum head no bearings but absolutely no scoring

@Bigtruckdrivah Жыл бұрын

Mr brand when a engine that comes back in that has this process done, do you just run the same tap in the existing hole on the front and rears? Couldn’t imagine you could go any bigger if the threads got buggered up on the block side. Nice info, keep’m coming!

@BrandRacingEngines Жыл бұрын

Yes the same hole

@THE_A.RAVEN1 Жыл бұрын

Is this something we can also do on the GM lf4 twin turbo platform?

@kyletrusty7228 Жыл бұрын

Absolutely love this video how long of screws do you use going into the middle 3 ???

@BrandRacingEngines Жыл бұрын

.750 to .875

@michaelfackler9716 Жыл бұрын

Genious!!!

@donm9951 5 ай бұрын

i now use this on all ls builds''

@markshaw3219 Жыл бұрын

So just drill and tap the inside bearings straight through. After drilling and tapping you just emory cloth sand (lightly) all cam-bearing surfaces and call her done??

@uncleremis69 Жыл бұрын

Mr Brand if you have the time, can you explain why LS engines have can bearing problems. I’m obviously not a machinist or engine builder. But the cam spins exactly half the speed of the crank with a lighter load. My experience with small block ford and chevy was you can rebuild the bottom end and not touch the cam bearings and everything will be fine. But I constantly hear about LS cam bearings. Thank you sir. I truly enjoy watching your channel.

@BrandRacingEngines Жыл бұрын

A split cam bearing

@philipmazzuca2269 11 ай бұрын

Always replace with a 1-piece cam bearing

@donm9951 7 ай бұрын

is there a problem with ls1 bearings spinning?

@tomsmith4066 Жыл бұрын

When I put cam bearings in especially in a aluminum block I would get the bock up to 180 degrees in a washer and put the bearings in cold that way the block shrinks down on the bearings. Just saying

@cruzemissile5409 4 ай бұрын

Did you drill thru the bearing before running the tap thru ? What did you use to deburr the bearing after tapping ?

@BrandRacingEngines 3 ай бұрын

Yes

@Pyle81 Жыл бұрын

Ive been asking others about doing this to save a OEM Aluminum Block engine. It seems that if you spin a cam bearing in a cast block that 99% of the time you can get away with replacing the bad bearings. But the Aluminum blocks are another story. Ive got a LY6 (6.0 Iron block) In my 09 Silverado 2500HD that we're 99% sure just spun the center cam bearing last week. And I can tell you this, Its not going back together with out getting this procedure done. And why wasn't GM doing this to start with??? Now I just need to find someone here in Northern Ohio that knows how to do this and has the gig/tool to do this.

@papergatorzfedducca7998 Жыл бұрын

Can you share a link for your go to cam bearing removal/install tool for LS engines. And how heavy is your hammer? Please and thank you. And are you doing this to keep from spinning cam bearings?

@BrandRacingEngines Жыл бұрын

I made the cam bearing install tool but you can by one from duraboud cam bearing manufacturer Thanks

@tommiemb Жыл бұрын

Interesting video but why didn't you show us the big jig you used to do the middle bearings? So if I want to do this at home I would need a set of your jigs or figure out how to build my own?

@BrandRacingEngines Жыл бұрын

Watch the start of the video it show it.

@jondahl3173 Жыл бұрын

Any experience with the center cam bearing/block area on aluminum 5.3 blocks shrinking in size? And can you pin the aluminum block?

@BrandRacingEngines Жыл бұрын

You Can Pin Alum or cast all the billet hemi blocks are pin similar way

@jimzivny1554 Жыл бұрын

Ive heard of guys doing this now i understand how its done. Im a big block guy

@user-hs4vf8mx4x 2 ай бұрын

U didn’t show how u used the drill jig u made up for the middle bearings …. So why not drill it and tap it before bearings get installed and then install bearing and screw the set screw just putting pressure on the bearing vs like u did thru the bearing . Just wondering if that would work to ?