Pinpoint How-To for DJI Pilot 2 - DJI Mavic 3T 3E 3M Drone

Рет қаралды 12,649

Savage Tactical Recon - Thermal Drone Services

Күн бұрын

In addition to the contents of this video, there is also a shareable QR code for each pinpoint. Simple click on the pin and click the "share" icon.
This is a how-to for the pinpoint feature on the DJI Pilot 2 App used on DJI Enterprise drones. The specific in this how-to apply directly to the Mavic 3 Enterprise. I cannot speak for the application across the other drones in the DJI enterprise line-up.
How To Use The Pinpoint Feature
1) Set a Pinpoint - Multiple Methods and Results
2) Edit a Pinpoint - Color, Lat/Long, Altitude
3) How I Use Pinpoints
- Setting a Pin
Pins generated in the “camera” view are placed at the drone position/altitude.
Pins generated in the “map” view are placed at the location of the map reticle and zero(take-off point) altitude.
- Editing a Pin
Color, Location(Latitude/Longitude), and Altitude can all be edited
- "View Pinpoint" feature helps to set a heading to the selected pinpoint.
- Distance to Pin
- Setting Pins at Zero Altitude
- Using Pins for Flight Path History
This method is helpful for returning to where you left off...especially in the event you lose the flight path info. Normally for a battery swap, you would leave the controller on and Pilot 2 open and retain the flight path. But this is a backup/insurance.
- Custom Buttons for Pinpoints
Update 8-29-23...Firmware updates 07.01.1003(aircraft) and 02.01.0003(controller) fix the disappearing pinpoint issue noted below.
Note: Users(including myself) with the 3/2/2023 software updates are finding that newly created pinpoints do not permanently save when the controller is turned off. In my case, I still have all my old pins, but I cannot permanently edit, delete, etc any of them. So, while the information in the video applies, there seems to be a bug in the latest update that affects the pinpoint feature. Update 6/21/23: I had a conversation with a contact at DJI Support and they informed me that engineering is aware of the issue and an update will be included in the next firmware update. They did not have an ETA on the next update. They did suggest either using a work-around via Flight Hub 2 cloud(in Pilot 2 app)(I'm not a fan of this options and can do a video if I get a few comments) or downgrading your firmware via DJI Assistant 2 Enterprise.
---------------------------------------------
Time Codes
---------------------------------------------
0:00 The Pinpoint Feature
1:27 Setting a Pinpoint
3:29 Editing Pinpoint Location
4:14 Edit Pinpoint Altitude
5:10 View Pinpoint Feature
6:28 Measuring Distance
8:38 Setting Pinpoint at Zero Altitude
10:10 Using Pinpoints for Flight Path History
12:13 Custom Buttons for Pinpoints

Пікірлер: 52

@CitizenChaz 12 күн бұрын

Another informative video - learning a lot about the M3T from you guys. Cheers!

@STRThermal 11 күн бұрын

@@CitizenChaz I’m glad to hear that! Thanks for watching.

@mucy2807 23 күн бұрын

Very good video - Ty to guys like yourself who do these videos for thickies like myself 😮😂😊

@STRThermal 23 күн бұрын

@@mucy2807 Glad it was helpful! Thanks for watching and subscribing.

@m4rkuz71 Ай бұрын

great video best i ever seen. tkx 4 share

@STRThermal Ай бұрын

Thank you!

@CorsaGarageJustin 4 ай бұрын

Great tips. Thank you

@padraicmulroy628 3 ай бұрын

Thanks for the great presentation. Lot of detail. Well done

@STRThermal 3 ай бұрын

Thanks...I appreciate it!

@theboomeroutdoorsman1379 7 ай бұрын

Thanks for all the great information. You do a super job at filling in the gaps in the DJI manual. Would rather watch/listen to someone like you rather than this Drone Deer Recovery pyramid scheme folks. Keep up the good work and keep flying that very capable Mavic 3T. Thanks for your advice on the light. I ordered one and it will be here on 04JAN2024. I may be reaching out.

@STRThermal 7 ай бұрын

Man, thanks so much. That’s some high praise. Means a lot.

@KelvinFPV Жыл бұрын

Awesome video. I'm setting up a training for our team next weekend and I'll be using some of your tips. Thanks!

@STRThermal Жыл бұрын

Very cool!

@KelvinFPV Жыл бұрын

@@STRThermal I'd like to figure out how to sync pinpoints between 2 aircraft without flighthub. Maybe some kind of dropbox,export,import senerio but just syncing the native dji storage location would be better.

@STRThermal Жыл бұрын

@@KelvinFPV The problem is even if you use a messenger service(Teams, WhatsApp, etc) to send your exported(I have a video for that) KML file of your pins, there is no way for your fellow pilot to import it into his system. That’s where a system like Flighthub might be handy. But the cost of Flighthub is ridiculous for smaller teams.

@KelvinFPV Жыл бұрын

@@STRThermal Oh yeah, Guess I was picturing the caltopo menu in my minds eye when I said that. I suppose DJI already killed any thoughts of syncing the root folder the pinpoints are stored in before exporting. I agree, Flighthub is ridiculously expensive.

@STRThermal Жыл бұрын

One thing you can do, if you already have pins saved and want to share with another pilot, is to make a simple waypoint mission using those pin locations. Then share the waypoint file type and your other Pilot will be able to import that.

@rufus48 8 ай бұрын

Mavic 3T supports augmented homepoint but won't drop an estimated pin down on something you're looking at and it makes me shake my head. I get it doesn't have a laser range finder, but it should be "good enough". It's a pain to have to fly directly over the object or to manually drop a pin over the Map where you think the object is. ATAK UAS tool has no issues operating this way on the M3T with a marginal degree of error, and UAS tool doesnt even officially support the M3T.

@STRThermal 8 ай бұрын

Excellent point, especially since you have “view pinpoint” and it clearly works well. I think it would work if you set a pin at the intersection of the camera projected view and some reference plane(spheroid) such as 0 AGL or the known topography(we do have terrain follow modes in the autonomous modes and may have to download the terrain map). I’ll add it to my list to discuss with DJI.

@stihl888 3 ай бұрын

Hey Rufus, i'm thinking about getting a Mavic 3T and was wondering if we could load it into ATAK using UAS tool but there's practically no articles on how/if this will work with the 3T. Is is straight forward to load in the 3t with ATAK? I'm new to ATAK/UAS etc so have only limited knowledge to date but am a quick learner if i have an article/video to follow. Cheers

@Perrymatt1973 3 ай бұрын

Thanks fro this. One thing, can you set the drone to fly automatically back to a pin, or is this manual. Do the pins always stay there afterwards. So if you return, you can repeat the same flight pattern using the pins. Thanks.

@STRThermal 3 ай бұрын

You cannot autonomously fly to a pin(without making a route to its position), you can use "View pinpoint" to face the pin and set your heading. Pins always stay and will be there the next time you power up(there was a firmware that broke this. I reported the issue to DJI and they fixed it on the subsequent firmware(Aug/Sept 2023)). Pins are just a way to mark and find your way back to a point of interest(deer, lost dog, lost human, etc).

@treystanton Жыл бұрын

Great video, alot of good tips. I am having an issue maybe you can help me with. When I fly my DJI M3T and set pinpoints, they do not show up on subsequent flights. The next "number" shows up, but the previous ones are not listed when I long press the pin button. Any idea why this could be?

@STRThermal Жыл бұрын

See my comment in the info for the video. I confirmed with DJI this is a known issue with the latest firmware. They said we can wait until the update to fix it or use Assistance 2 for Enterprise to revert back to a working firmware level.

@STRThermal 7 ай бұрын

Came across this comment again, hope you got the latest firmware(Aug ‘23) which fixes the disappearing pinpoints.

@slowmomine4224 7 ай бұрын

Are the pin point will more accurate if we use an rtk module with drtk 2 base station? After take the coordinates from the pin point

@STRThermal 7 ай бұрын

Great question. I will first state that I am not an RTK expert but from the fundamentals the answer is yes. With the RTK, the drone will know its position more accurately, and thus the pins set at the drone position or on the ground(from map view) will be, likewise, more accurate.

@jonukasjonukas4288 3 ай бұрын

Is it possible to accurately draw the boundary lines between four pinpoints and mark the area for mapping? Currently, I place four pinpoints, for example, at the four corners of a house, to understand the boundaries. Then, I need to choose a mission and try to fit the mapping area between the marked pinpoints. However, this is not always completely accurate. This is somewhat problematic because when I try to set the mapping corner boundaries, a pinpoint is automatically selected/marked, and the mapping point is not placed.

@STRThermal 3 ай бұрын

Unfortunately you can’t set your map corners to actual existing pinpoints. And if you have pinpoints, it won’t let you set a mission corner where the pinpoint already is. You can create an area and use that directly for your mapping mission but you can’t adjust those corners to exact GPS coordinates like you can a pinpoint. DJI should allow mission points to be set at existing pins or edited for accuracy but I suspect they realized corner accuracy is not important for mapping as you’re usually using overlap to adjacent properties to get all the images you need. But for waypoint missions where you’d like to be precise, I think it would be valuable to be able to select existing points or edit points. I hope that answers your question.

@WilliamsIsAwesome 3 ай бұрын

Researching how to reset pin to 0. Any ideas?

@STRThermal 3 ай бұрын

Thanks for watching. Currently there is no way to reset the pin count.

@neilcowley6185 Жыл бұрын

Great videos , thanks for posting, im new to the mavic 3 T , could you tell me if theres a way of attaching a photo to a pin, i'm looking at attaching photos of deer to the pin in the location they are seen Thanks

@STRThermal Жыл бұрын

No, not that I know of.

@ericday2072 4 ай бұрын

Can the icon be dragged anywhere on the map and provide coordinates that could be reported to emergency services for search and rescue? 4:08

@STRThermal 4 ай бұрын

Yes it can! And there’s a shareable QR code that anyone can scan and get a Google Maps link to the point. If you have a lot of points that you need to share, you can export a kml file of all the points.

@RiReZe1 3 ай бұрын

I'm having problems with pipoints not saving in the controller when turned off or when switching accounts, any solutions yet?

@STRThermal 3 ай бұрын

Yes, at the bottom of the description...."Update 8-29-23...Firmware updates 07.01.1003(aircraft) and 02.01.0003(controller) fix the disappearing pinpoint issue noted below." Seems you still may have an old firmware?

@RiReZe1 3 ай бұрын

@@STRThermal I downloaded the latest version, I hope itworks, thanks 👍

@upchurch57 10 ай бұрын

Is there any way to transfer a pin to your cell phone?

@STRThermal 10 ай бұрын

Yes, with the latest update(September 2023), you can now scan a QR code with your phone and open that pin in google maps. You can copy the coordinates from Google Maps and easily paste into your favorite mapping app.

@ffshawn1 2 ай бұрын

Do you know how to set a flight pattern that the aircraft can fly autonomously? I'm trying to fly a grid pattern for surveying my ranch and counting pigs and exotics. When I setup a flight pattern, I can't set the altitude without it adjusting my grid spacing. When is et my altitude at 150', it makes my grid spacing so close together that it would take 9 hrs to fly 700 acres. Any help on this would be great! Thanks

@STRThermal 2 ай бұрын

As you increase route altitude, your field of view increases and reduces the time. For 700 acres, as you stated, at 150 ft AGL its about 8 hrs ish. It would take 3.5 hrs using the thermal field of view at 325ft AGL and standard overlap(in the advanced settings). You could reduce the overlap and save well over an hour. Are you hoping to count the thermal signatures after the fact from the collected images or live?

@ffshawn1 2 ай бұрын

@@STRThermal yes, I am wanting to film in thermal mode as well and count after the fact. I cannot figure out how to make it stop taking still photos and switch it to thermal video. Thanks again! I've been on the phone with DJI multiple times and they are not much help.

@STRThermal 2 ай бұрын

@@ffshawn1 There is no option for turning off the photo collection. But I spec’d out in detail such a method to DJI, cross your fingers. Auto generated grid but more camera control flexibility like waypoints mode. It would be tedious but you could use waypoints instead and have the flexibility to record video instead.

@ffshawn1 2 ай бұрын

@@STRThermal Waypoints would be fine too. Do you have a video on setting waypoints and then the aircraft can fly those waypoints in a certain order? Thanks

@STRThermal 2 ай бұрын

I don't have a video myself and most of the ones on KZfaq will be for the standard consumer Mavic 3, not the enterprise. But if you've done the regular "Area Route"/Mapping mission, the waypoints is pretty straight forward. You can choose start record, stop record at certain waypoints, you can use manual yaw and gimbal angle or set the yaw to "follow route" and the gimbal to a set angle(90 degrees). The latest manual also now covers these methods in details. dl.djicdn.com/downloads/DJI_Mavic_3_Enterprise/20240411/DJI_Mavic_3E_3T_User_Manual_EN.pdf

@brysonhollar 8 ай бұрын

Can you easily send the pinned location to a cell phone?

@STRThermal 8 ай бұрын

There is a scannable QR code that contains a link to the coordinates on Google maps. Otherwise you could copy and paste coordinates to any popular messaging app installed on the controller.

@andrewhart9663 7 ай бұрын

How do you get pin point location displayed in a QR code?

@STRThermal 7 ай бұрын

That feature was added after this video was made. Click the pin on the map so you see the details of the pin, then click the share icon to show the QR code.

@andrewhart9663 7 ай бұрын

Thank you. @@STRThermal