Thanks Sean. Those are my fav part of doing the videos. Hunting down or making ridiculous clips that make me laugh. I appreciate the watch and comment.

I’m Happy to help. I appreciate the watch and comment Sha.

Thanks for saying so Ralphy. Happy to help.

I’m glad you got two things out of it. Thanks for the watch and comment Jungle..

I’m happy to help. Thanks for the watch and comment Stix.

Happy that it helped. Thanks for the watch and comment Cliff.

Thank you for the watch & comment Kratos

Happy to help. Thanks for the watch and commenting

Thanks Mega. Appreciate the comment and the watch.

Thank you for the watch Ras.

Sounds like a faulty unit.

I thank you for the watch and the comment Fernando.

Hi Blaq. I’m happy to help if I can. I’m just not sure what you mean..

Once you are using channel 3 or 4 the only way to hear them out through the master output is to use the upfader that corresponds to that channel. It’s a horrible way for it to work. I have a section in this video where I talk about how useless it really is. I’ve mentioned this for many of these 4 deck but only 2 channel fader controllers. It’s really there for marketing to say they have 4 deck capability. For true 4 channel performance, you need 4 channel faders.

There’s no way to change the color of them on this controller. They’re just amber

Same! Did you find ah solution?

I had trouble midi mapping the tracking section. When you midi map it the software will show that the first button (vocal) is mapped however when you press it to remove the vocal ,the button on your serato dj pro screen flickers a lot and the vocal can cut in and out the other 3 buttons (melody,bass,drums respectively) react like they should. The bottom 4 button mapped but button 7 & 8 don’t light up on the Rev1 but they do what they’re assigned to (instrumental beam and Drums echo) but there’s no corresponding light up of those 2 buttons. Maybe once the full release is out that glitch will be fixed.

Thanks for your explanation. I figure out the same. We'll wait then.

@@MassiveG81 happy to help. Thanks for the watch and comments.

Correct. Thanks for watching and the comment Hernan. It helps the channel tremendously.

@@idjchance you're welcome. I ended up getting one second hand with box for $299 AUD which is $203US. Good to know that the fader cut can be fine tuned. Cheers 👍🏾

I got it from my local Guitar Center the week of its release.

@@idjchance Still available at Guitar Center, but I am in europe

I couldn’t get them off either. I was going to put on gold chroma caps but noooooooo.

@@idjchance strange. With Such a plastic build, figured it’d be easy.

​@@DJBRAND-X Odd since DJTT says they're replaceable, but I have yet to see anyone successfully remove them.

in the same exact situation, same time period as well

Great question. . Just hold down the tempo range button and you will see it change. You would do the same thing to go from 16% to 50% and back to 8%. Hope that helped. Thanks for giving me a watch and comment.

Yes. I already had the license from previous controllers and it was seamless. Be sure you are using the latest version.

@@idjchance thank you

@@djlemzkenya happy to help. Let me know if you have any other questions or any tips.

How did y’all get serato pro to work only serato lite pops up

You pay a subscription fee to open up serato dj pro.

That seems to be a repeating issue according to a lot of the comments I’ve been getting. I’m thinking there are a lot of defective units out there. Let’s start basic troubleshooting. Are you getting the leds in the unit and the serato dj pro lighting up to the music? Are the master and headphone knobs not responding?

@@idjchance I think going into utility mode and right out fixed it. sound came out my headphones like a really short loop echoing out. then after reseting and restarting everything and my Mac it came back to life.

@@iamdjmaze that’s fantastic news! I so glad you got it to work for you. That’s for the watch and comments. It’s so appreciated. Like and subscribe if you feel it’s deserved. It feeds the YT algorithm beast that keeps my videos discoverable. Thanks

My serato lite is not reading my controller

I answered you when you asked 5 days ago. If you have this controller, make sure you’re running the latest version of serato DJ Pro and your computer meets or exceeds the minimum system requirements as stated on serato.com. A set of headphones and speakers and the applicable cables for them. Thanks for watching and commenting Giancarlo.

1

Hey Xbo. Do you have the current Monterey 12.3.1 OS and serato dj pro 2.5.11?

@@idjchance I have the 10.14 Mojave os on my 2011 laptop with the serato pro 2.5.11..isn’t that good enough for it sir?

@@djxbo4336 the minimum is 10.14. With an i3 processor and at least 4gb of RAM and 5 gb of space available. I would upgrade. Usually with a new piece of gear you want the what the newest OS and software that was out at the time of the release of that gear.

@@idjchance okay so please what’s the best advice..is it to change my laptop or wait for the utilities driver for Rev 1?

@@djxbo4336 if your MacBook doesn’t meet the requirements then I would say you need a different MacBook Pro . At least something from 2013 and up with more than the minimum requirements. Minimum requirements equals minimum performance and you run the risk of it becoming obsolete to run serato. I have a new MBP and still use my 2013 MBP with an i7quad processor,16gb ram and 2 hard drives (1 SSD, one ssd hybrid HD as a backup placed in the dvd drive bay) and it’s still a beast. No need to spend thousands if you don’t want to. I did in 2018 on a brand new one and my 2013 is still my go to.

The fader starts the track at it’s cue point when you hold down shift and move the fader. Sync mode makes the tracks sync to the same BEats per minute of the master track that is playing out to the crowd or live mix. There are 2 Sync modes in serato dj pro. Simple sync will match the track waveforms. Smart sync will match the beat grids for the tracks. Hope this helps. Thanks for the watch and the comment

@@idjchance thanks a lot. Understood. Very helpful tutorial! I have DJ Pro. Sorry, but now I have to ask what are beat grids? I see and know what waveforms are. Which is better...and why, or is it just a matter of preference?

Btw, I'm going to turn my fader start off for now, and just use the start/stop button...until I'm more experienced. Thanks again! I also have the Rev 1 btw, and would like to master it and ultimately get the Rev 7...whenever it's back on shelves.

I’m not a fan of the beat grids. They’re a pain, not completely accurate and take a huge amount of work to set for me mainly due to the fact that a huge percentage of my music came from my own personal records and cds so the software reads the clicks and cue burn or scratches in a cd as part of the beats. If you turn them on you’d see these white vertical lines with numbers marking the beats (1,2,3,4 etc) the 1 should be the very first actual beat and I’ve heard it’s usually the most accurate if you’ve gotten your songs from a dj service that actually setup the beat grids for you in the music file. You can manually set beat grids on a lot of controllers but it’s too hard for me. If feel like it’s producer level of work to set them. I’m sure there are plenty of way more talented and patient djs out there who have no issue. I don’t know any personally but the world is a big place with 75,000,000 djs.

I’m happy to help. Yeah the rev7 is a great controller I’d love to get my hands on too.

So first thing you’d need to do is make sure to have or download the latest version of Serato DJ lite (1.5.12) or Pro which I believe is 2.5.11 or 2.5.12 and it should be plug and play. Let me know how that works out for you and if you have any questions I’m happy to help.

@@idjchance the pro is fully up.to date and all music analysed what shall i need to do next before olug it in?

Just plug it in to the laptop then open serato and should just be ready to work. Plug in some headphones, a microphone (if you use one) and the RCA jacks on the rear into your speakers and have some fun mixing away

@@idjchance thank.u.i shall.tackle it on mon on my day off sometimes ikl use the rev as well as my sr controller so hopefuly dont need to fiddle wifh setings all time

No. I overthought the count. It doesn’t seem to matter. I mentioned it later in the vid that I must be wrong when it only flashed a couple of times.

1 in the utilities and 1 in the software

@@idjchance thanks for the reply appreciate it

@@djridgenyc I’m happy to help.

Thanks for the comment and watch True.

I’m having that same issue now! Have you found a solution?

According to pioneer no drivers are needed,just Windows 10 or 11 with the latest service packs. You can also look at the Serato website for pc optimization: support.serato.com/hc/en-us/sections/200585104-Computer-Optimization Hope this helps. Thanks for the watch and comment.

Have you adjust your gain on the Rev 1 or on the screen of serato dj pro software?

​@@idjchanceyea I have auto gain on and I tried tuning it off and it's the same

@@devin7729 that’s definitely strange. I can’t imagine what it could be other than a defective controller.

Hello Rt. Thanks for the watch and comment. You turn the controller on in utilities mode. Hold down the left deck play and cue buttons while plugging in the controllers usb. I start around 00:28 in this video. Let me know if you have any other questions.

@@idjchance ok does rev1 comes with control audio control

@@iamdjrt I’m unsure of what you mean. Can you clarify a little?

@@idjchance would ave to show u a pic u on ig

@@iamdjrt sure. It’s @idjchance

Happy to help Sony.

Rev1

@@idjchance I wasn’t sure if there was an advantage to Rekordbox over Serato

What is it that you want it to do that it is not doing?

In which speaker are you referring?

Same here. I am having the same issue

@@waynewayne508 try to update your computer fully like any update it might need the try again I had to do that and now it’s up in running scared the piss outta me ngk

I’m unsure what you mean? Are the songs dragging or is it there a lag after you perform some action? Either way Both of those scenarios sound strange and new to me.

Yes it dragging sir

@@kingwarrior8301 I honestly have no idea why it would be doing that. I’ve never encountered that problem. Have you tried changing to a different USB cable? Are you running a Mac or PC? Are you running the latest version of Serato DJ?

What seems to be the issue?

@@idjchance could not hear any thing.. but Got it fixed. Thanks for replying! though

I’m glad it worked out.

In the setting mixer section. It’ll say something to the effect “reverse” in your computer click on it and you’ll be good to go. Let me know how you do. I appreciate the watch and the question.

Great question. . Just hold down the tempo range button and you will see it change. You would do the same thing to go from 16% to 50% and back to 8%. Hope that helped. Thanks for giving me a watch and comment.

@@idjchance I will give it a try and get back to you thanks very much for the answer I appreciate

@@djosaz-b I’m happy to help.