PIRACY! Making an Amstrad GX4000 Cartridge with no ACID chips plundered! All new parts!

No video

PIRACY! Making an Amstrad GX4000 Cartridge with no ACID chips plundered! All new parts!

Рет қаралды 13,438

Күн бұрын

** This video is kindly supported by www.PCBWay.com - My choice for for high quality PCB manufacturing, 3D printing and more! **
I thought we could do a little project to make our own Amstrad GX4000 (and CPC Plus) cartridges.
I didn't want to butcher any existing cartridges, so in this video there is a bit of everything; Converting ROM files, Programming EPROMs, 3D Printed Casing, Soldering, Photoshop design, Label Printing and Play Testing.
As always, I'm standing on the shoulders of giants and the things featured in this video are listed below. I hope you enjoy the video and thank you for keeping the channel alive ❤
💾 Chinnery’s forum Post with the GERBER files: www.cpcwiki.eu... (Sign up required for download)
💾 Cwiiis' GX4000 cartridge STL for 3D printing: www.cpcwiki.eu... (Sign up required for download)
💾 Oscar Sanchez's CPR to BIN: www.cpcmania.co...
💾 The editable GX4000 Cartridge label I created is here: markfixesstuff...
-------------------------------------------------
🤞 💔 THANK YOU SO MUCH FOR SUPPORTING THE CHANNEL! 🆘 🏆
The cost of living crisis has really put the viability of continuing the channel in jeopardy. Your kind and ongoing support is helping me to carry on to try and find some additional income streams.
⚙ Visit / markfixesstuff for more info about Patreon Benefits! 🤗
If you hate Patreon, you can buy me a coffee or become a monthly member at ko-fi.com/mark... - It really helps me keep the studio lights on!
You could also simply donate via www.paypal.com... to help create more content.
Thanks for watching and being awesome!
-------------------------------------------------
🎶🎵🎶 Music Used in this Episode! 🎶🎵🎶
🎼Octodrone VI - ELFL 🔗 www.epidemicso...
🎼City Lights, City Dreams - Forever Sunset 🔗 www.epidemicso...
🎼Eyes To See It - ELFL 🔗 www.epidemicso...
🎼Fugent - Lupus Nocte 🔗 www.epidemicso...
🎼Give Me A Chance - The Basic Game 🔗 www.epidemicso...
🎼Humbot - Wave Saver 🔗 www.epidemicso...
🎼Midnight Safari - Lupus Nocte 🔗 www.epidemicso...
🎼Never Easy - Mattie Maguire 🔗 www.epidemicso...
🎼Red Driver - Ben Elson 🔗 www.epidemicso...

Пікірлер: 149

@Cwiiis Жыл бұрын

Nice to see someone using my case design 🙂 I've been meaning to make a revision with a window for socketed boards but still haven't got round to it...

@jason_a_smith_gb Жыл бұрын

Om.

@MarkFixesStuff Жыл бұрын

Thanks for designing the case and thanks for releasing it. Hope I said your name right! I did actually consider making a hole myself but the video was a bit too long already.

@Cwiiis Жыл бұрын

@@MarkFixesStuff not quite, but no one ever does so I only have my teenage self to blame for picking that spelling! 😝 It's Chris, but pronounced to rhyme with Squeeze, pretty much 🙂

@cheater00 Жыл бұрын

might want to make the edges on the cartridge a little rounded where the label is so the paper doesn't have to crease. kind of like a genny cart

@Cwiiis Жыл бұрын

@@cheater00 looks like my reply got deleted, presumably because I linked to the Thingiverse page... Short of it is, the edges are already chamfered, like the original carts. I didn't want to stray from that design, but the source is provided for anyone that wants to have a more extreme chamfer.

@PaulinesPastimes Жыл бұрын

Always nice to see someone else enjoying a pointless exercise 😄 Fun though. Today I found a phono pre-amp that was the first circuit board thing I made back in the late 1970s. The components were all crooked and the soldering was very blobby but it worked back then. With the knowledge I have absorbed watching your videos and others from KZfaq, I gave it a once-over and tidied it all up, repairing a lifted trace and now it looks really good. Almost useless but you never know! That's the thing with pointless exercises. 😊

@AnthonyFlack Жыл бұрын

Great stuff. The UK's one and only game console needs more love. Its meagre software library is growing now thanks to the efforts of hobbyist developers.

@DangerousPictures Жыл бұрын

they should call the boards with the 74 series chip base since it neutralizes acid

@MarkFixesStuff Жыл бұрын

Hahha!

@merman1974 Жыл бұрын

I did enjoy the label-making and all its typos. I would not say it was pointless to make this. For the recent homebrew games that have not had a physical release, this is a great way of preserving them and making sure you can play them on the real hardware. Of course it would be unscrupulous to use the technique to make reproduction cartridges and pass them off as originals.

@plan7a Жыл бұрын

I got such 80's horror film vibes from some of the music in this one it must be said!🎵

@imnickleonard Жыл бұрын

Looking forward to this. I’ve love the GX4000. I’ll never get rid of my CPC but this is now a perfect daily driver

@grandupper2588 Жыл бұрын

very nice job, i'm glad to see your doing better after the fire, keep up the good work mate.

@RobTheSquire Жыл бұрын

With a slight re-design of the pcb and the length of the cartridge you'll be able to use sockets for the eproms, but then some of us like things to look original.

@geofftottenperthcoys9944 Жыл бұрын

Sold Amstrad's in Adelaide, South Australia in the mid to late 80's. My Amiga 600HD with ram expansion and a 40mb HDD was the bomb.

@cheater00 Жыл бұрын

lovely video. might want to make the edges on the cartridge a little rounded where the label is so the paper doesn't have to crease. kind of like a genny cart

@electricadventures Жыл бұрын

That came together really well, I found the label editing portion fascinating! I have a system with the multi-cart but no originals so I might give this a go at some stage. And then there is the potential promise of converting some of my titles over to the system (when I get the time of course :)).

@MarkFixesStuff Жыл бұрын

Very cool! You should do that Tony!!

@gamegenie8213 Жыл бұрын

Really detailed and top video dude 🤘🏻

@MrJozza65 Жыл бұрын

Aunt Edna would be proud

@TheBatNaz Жыл бұрын

You should make a modified EPROM test PCB that makes the whole thing longer and brings the EPROM socket above the top of the case. That way you can stick a ZIF socket on the test cart for easier testing

@cjh0751 Жыл бұрын

Nice work on the label. Looks great 👍

@neophytealpha Жыл бұрын

You could also make an adapter that could use a custom shell to extend the cartridge slot so that you could use socketed chips. Perhaps even longer cartridges that are narrow to fit in then after enough is over the system widen out to make room for socketed chips.

@neophytealpha Жыл бұрын

Plus side a cartridge slot extender adapter could also save wear and tear on the original cartridge slot. Add in a cartridge ejector on the extension adapter too. Make things a lot easier

@mydogslikeboiledeggs7094 Жыл бұрын

This was my go-to Photoshop style in highschool (20 years ago 😭.) If you really wanted to make it look clean and fresh, black out the silhouette of the clock design and have at it with some dot matrix filters. This is really more like houndstooth or some crap, but whatever.

@MD_Builds Жыл бұрын

Aunt Edna certainly enjoyed that game!

@rimmersbryggeri Жыл бұрын

Looks like if you re route the board you could fit a socketed eprom on the reverse side. With one of those beautiful zif sockets from that new commodore 64 motherboard replacement that could be a nice option for a multicart.

@azurabayta133 Жыл бұрын

I love how much care you put into creating the new label, the result is pretty sharp! What kind of paper and printer did you use for them?

@MarkFixesStuff Жыл бұрын

Thank you :) It's this paper amzn.to/3lL1ZMd

@harcalion Жыл бұрын

@@MarkFixesStuff PPD paper is very nice, I use the 280 gsm Satin Pearl for my Nintendo repro game boxes.

@cyphertheory Жыл бұрын

Great vid, real nostalgia trip!

@GORF_EMPIRE Жыл бұрын

Another informative and entertaining video Mark! 👍

@LetsPlayKeldeo Жыл бұрын

aHHH I was just rewatching your older episodes today !

@ItsCrapContent Жыл бұрын

Some of the games look really good …cool vid

@MarkFixesStuff Жыл бұрын

It's a nice little console. Not a patch on the Mega Drive or Amiga of course so it flopped.

@hollybrereton3140 Жыл бұрын

Mark running around in his underpants, why does this not surprise me in the slightest! Great vid as always and if you want to tease me back then I'm the one speeding hours in PS correcting ever signal darn pixel x.

@MarkFixesStuff Жыл бұрын

Bloody pixel peeper x

@retrorobbins Жыл бұрын

Another fantastic watch and I also have the gx4000 we've only one , cartridge and happened to be burning rubber 😁 however I think if there a multi cartridge solution, I'm may stick with that has he could probably end up very expensive, that being said I think I will make one or two great video enjoy watching thank you for sharing ,😎

@peddersoldchap 9 ай бұрын

The metal is strong with this one!

@baxtardboy Жыл бұрын

Get that knackered burnt console, spray it with clear coat, stick it in a perspex display box and stick it on Ebay. It's a survivor man, should be worth a few bob. Or sell it back to Lord Sugar. As a conversation piece in a corner of his library I'm sure he'd happily drop a couple of grand for it lol.

@MarkFixesStuff Жыл бұрын

Problem is it REALLY STINKS. Even in a seal plasting zippy bag you can smell the death.

@baxtardboy Жыл бұрын

@@MarkFixesStuff Fair enough. The only thing that would really work in that case is to embed it in clear resin and I wonder if it's worth the trubs.

@GreyHulk2156 Жыл бұрын

And, as we know, PCB stands for "Pirate Cartridge Build". ;P

@plan7a Жыл бұрын

Or maybe 'Professionally Created Bootlegs'? Just a thought!👻

@kildogery Жыл бұрын

Looks amazing.

@MarkFixesStuff Жыл бұрын

Thank you!

@frankowalker4662 Жыл бұрын

Nice lables. And you're a demon with that iron. LOL.

@thomaskalbe6018 Жыл бұрын

Hi Mark! Outstanding video as always from you :-). I couldn't find the PS template for the cartridge label though ...

@brokenik Жыл бұрын

Hi Mark! Excellent video! You could make a better quality label by using free software such as Inkscape that could be easliy convert bitmap do vector graphic which would looks much better.

@247hinkey Жыл бұрын

Great upload - If you had used a resin printer you would of got a perfect finish.

@MarkFixesStuff Жыл бұрын

I tried with my resin printer but ran out of time and patience. I have a problem with the ball socket on the build plate which kills the levelling. New printer inbound though!

@Martipar Жыл бұрын

I know you're going for an authentic look but you could create an spacer or even horizontally aligned cartridges with cartridge pins sticking out the bottom to allow space for socketed chips.

@MarkFixesStuff Жыл бұрын

Nice idea!

@Martipar Жыл бұрын

I appreciate this reply.

@TheVetUk Жыл бұрын

I never new I wanted this till now dam you mark 😂

@teh_supar_hackr 7 ай бұрын

Since you're making a new label anyways, I would have made an alternative one that has the box art to the game on the front to make it stand out more compared to the other official designs.

@MarkFixesStuff 7 ай бұрын

That's my plan when I recover some melted and burned up Colecovision cartridges

@teh_supar_hackr 7 ай бұрын

@@MarkFixesStuff Melted?! If those cartridges work after being burned then the Colecovision would have the strongest cartridges next to NES ones!

@MarkFixesStuff 7 ай бұрын

Yeah! I think they will work after cleaning. They are shown in one of my fire videos somewhere

@teh_supar_hackr 7 ай бұрын

@@MarkFixesStuff I'll have to watch those soon, the best repair videos are ones of systems that are seemingly unfixable like The 8-Bit Guy's Vic-20 which had loads of oil inside it he got to working order!

@michaellowery1559 Жыл бұрын

I had GX4000 as a kid😀

@tomenza Жыл бұрын

Where can I get one of those amazing blue work station pads? Great video! I learn so much watching your channel

@MarkFixesStuff Жыл бұрын

Thank you so much :) I got mine from Amazon. This one is similar. It has magnets to hold the screws in some of the partitions. amzn.to/3xFCm29

@vanhetgoor Жыл бұрын

It is not a miracle why the GX4000 flunked. If every software firm need to ask Alan Sugar for an ASIC to let it work then there are not many willing to make software for it. Commodore, Apple, all ZX's and MSX were open systems, for everybody to use, that is why commercial software developers took these and therefore these systems were a succes.

@andyc8257 Жыл бұрын

That was pretty standard for consoles at the time, almost every manufacturer had some kind of lockout chip to ensure they got a cut of every cartridge sold. Indeed the only reason Amstrad wanted to get into the console market was because of the potential revenue from each game sold. The hardware isn't actually that bad, although it's a bit quirky to develop for because of its heritage. What really killed it was not having a strong line up of games at launch, instead there were a bunch of barely enhanced CPC conversions and literally nobody was going to pay £25 for a cart game that could be picked up for £2.99 on cassette.

@zxrenew5642 Жыл бұрын

Nice one. Loved it. Well paced.

@MarkFixesStuff Жыл бұрын

Thanks a lot Peter mate!

@MarkFixesStuff Жыл бұрын

Thank you so much for watching. With the cost of living crisis, this channel is relying of the support of our amazing Patrons. If you can chuck a few coins in the hat and keep the content coming please consider becoming a patron at www.patreon.com/markfixesstuff or a monthly subscriber at ko-fi.com/markfixesstuff! If you'd like send a one off tip then hit me up at www.paypal.com/paypalme/markfixesstuff. Every penny helps keep the filming lights on and the camera rolling at the moment, so thank you for your support 🤗

@loganjorgensen Жыл бұрын

Arrr, that be a fine cartridge. ;)

@hikariyouk Жыл бұрын

Hmm, for testing purposes a version of the board with a ZIF socket on the end of a ribbon cable might be a useful iteration. I doubt propagation delay is going to be an issue on that system...

@Zhixalom Жыл бұрын

🤔I can't help but think: why not just design a slightly taller PCB, move everything upwards just enough, so that a socketed EPROM would go clear of the GX4000's casing, and then obviously also change the 3D design to match. I mean, it quite obviously isn't ever going to look like an original cartridge anyway. So would a slightly elongated and top bulging (yet more practical) enclosure really be that much more of an eyesore?

@andrewlittleboy8532 Жыл бұрын

Just a comment on the ultrasonic cleaner. Did you see the UK gov notice about some of these being detained and destroyed at UK customs due to a faulty earth creating an electrocution and fire hazard? It's well worth checking the earthing internally.

@MarkFixesStuff Жыл бұрын

I’m planning to check the internal wiring but I’d not seen that. Thanks for the warning!

@andrewlittleboy8532 Жыл бұрын

It seem to be the VEVOR ones affected but a search of 'ultrasonic cleaner customs detained uk' should come up the first results.

@MarkFixesStuff Жыл бұрын

@@andrewlittleboy8532 that makes sense. Vevor are awful. I had to fight them to get my money back when they delivered me a wrecked TV trolley.

@3vi1J Жыл бұрын

Sucks that sockets won't fit in the cart shells. :( Good idea socketing one for test anyway. I found that with ColecoVision carts, the repro boards will still just barely fit in the original cart shells even with sockets. Maybe someone could design another repro board and shell for the GX4000 carts that raises the eprom socket a bit and has a shell that bulges in that portion above the console.

@timpullen4941 Жыл бұрын

Lead solder comment resonates with me. Haha

@6581punk Жыл бұрын

I'm gonna tell Alan about this, he'll be cross with you :)

@MarkFixesStuff Жыл бұрын

I’m Fired!

@domramsey Жыл бұрын

Such care an attention applied to such blatant thievery! Send them to me and I'll test them on my CPC Plus. (By "test" I mean "keep" obviously.)

@douro20 5 ай бұрын

Too bad my G540 won't program those particular EPROMs...unless someone were to somehow add support with a software patch.

@djm9937 Жыл бұрын

great job !!

@ChrisShadowens Жыл бұрын

Would it have been possible to have crafted a muticart for the system or is that not something on the "hobbyist" level of fabrication? I liked what you made and enjoyed watching you put it all together but I couldn't help but think over and over "all this work for ONE game?!".

@davidchivatodelafuente6746 8 ай бұрын

Very good job!!!!...is the Photoshop PSD template available?....😥 I'm not very good with that tool....

@Codetapper Жыл бұрын

The perfectionist in me is annoyed you wrote "GHOSTS & GOBLINS" instead of the actual name "Ghosts 'n Goblins" though!

@MarkFixesStuff Жыл бұрын

Classic bootleg style error

@MrAlan1828 9 ай бұрын

I have a CPC464+ bought eons ago, no psu and no monitor and no basic cart, how do I make it reborn again? I've seen that one can convert it to run floppy disks much like a CPC6128+

@linuxgnuru Жыл бұрын

Could you provide the STL location for the cool resistor bender?

@MarkFixesStuff Жыл бұрын

Sorry, I missed this! www.thingiverse.com/thing:1467855/files

@Cwiiis 7 ай бұрын

I'm just now coming to the end of producing a new GX4000 game and remembered this video hoping it'd save me some time with the label design... Seems the link to the template is missing from the description, any chance of getting that, please? :)

@MarkFixesStuff 7 ай бұрын

I’ll upload it for you ASAP

@Cwiiis 7 ай бұрын

@@MarkFixesStuff thank you kindly!

@MarkFixesStuff 7 ай бұрын

@@Cwiiis I've uploaded the file to my website and updated the description, but basically it's here: markfixesstuff.co.uk/amstrad-cpc/gx4000-game-cartridge-no-acid-chip/ Thanks for remembering me and tell me more about the game!!!

@Cwiiis 7 ай бұрын

@@MarkFixesStuff Thanks, much appreciated! I'll send you an e-mail, KZfaq has a tendency to silently reject my comments whenever I post links :|

@keiiko Жыл бұрын

Personally I would recreate the graphics in illustrator or inkscape in vector form :)

@MarkFixesStuff Жыл бұрын

I have Illustrator but no idea how to use it. I come from a photography background

@keiiko Жыл бұрын

@@MarkFixesStuff I'm the same, i learned how to use the illustrator way much later than photoshop, but now I can say that it's basically the same thing once you know where's what :) last year in December I created two custom floppy label's in inkscape to learn how to use it and i can say that it's nice free vector editor but adobe illustrator is better. Now what would be benefits of recreation in vectors? You can print in any DPI and resolution if anyone wants miniatures or some poster. You can always add a bitmap image to it. You can actually make proper gray color of the artwork, as the dotted print is not really nice when photographed or scanned then rescaled and again printed. It might look ok for most people in this basics design but anything more complex might be visible. And lastly you can always easily edit colors, gradients and shapes in vector. :) Lately I talk more with professionals in graphic publishing so I'm more interested into this, but your method is still valid in what you wanted to achieve 👍

@rtorzi Жыл бұрын

Hi Mark, I wanted to ask you if the Sofi SP8-B programmer is suitable for programming that type of Eprom. Thank you.

@MarkFixesStuff Жыл бұрын

It probably is, but it’s best to check with the manufacturer. You need to look for the “device list” for the programmer. I’d probably recommend the TL866 myself because I know it works.

@rtorzi Жыл бұрын

@@MarkFixesStuff ok, thank’s…

@arduinopl7460 29 күн бұрын

Hi there, Can You update link with editable GX4000 Cartridge label ? It's dead now :(q

@MarkFixesStuff 29 күн бұрын

Yes sorry. My website is down due to a hack. If you email me markfixesstuff at gmail dot com I can send you a temp link until the site is recreated

@MarkFixesStuff 28 күн бұрын

I've sent you the label in an email.

@arduinopl7460 28 күн бұрын

@@MarkFixesStuff Thank You very much, it will be very useful to me. I accidentally washed the label from my original Burnin' Rubber + Basic cart.

@Beaps73 2 ай бұрын

Hello, im looking for 5 pcbs. Would you be able to help me out rather than buy a big chunk from PCBWay?

@MarkFixesStuff 2 ай бұрын

Are you in the UK? Email me markfixesstuff at gmail dot com

@Beaps73 2 ай бұрын

@@MarkFixesStuff I’m in the UK, I have emailed you. Snk_fever

@GegoXaren Жыл бұрын

I would have created a vector image in Inkscape instead of all that extra work in Photoshop...

@KarldorisLambley 7 ай бұрын

i remember trying to flog these dreadful things. around the same time miles gordon tried to tell me the sam coupe was a great idea at an earls court computer trade beano. i also attended the launch for the Panasonic fz1 real multiplayer 3D0 (lol, that name!). it had buses full of the machines and remarkably attractive women pretending to care about them. happy times, and shite machines.

@MarkFixesStuff 7 ай бұрын

It’s true. A lot of these machines had the stench of failure on them from the start 😂

@MrBocasecaman 3 ай бұрын

😮😮😮

@catriona_drummond Жыл бұрын

Mark labels stuff. Another episode where things get sticky.

@MarkFixesStuff Жыл бұрын

Every episode really…

@talideon Жыл бұрын

Looks like the Smurfs have a lot of ash in their diet these days!

@MarkFixesStuff Жыл бұрын

It's vintage Papa Smurf merde

@GegoXaren Жыл бұрын

Those are not (ER)EPROMs. Those are LEPROMs ol UVEPROMs. .

@davidretrogamesplayedbadly3533 Жыл бұрын

Mark the pirate king ☠️ 🏴‍☠️ 🦜

@TboneLoyal Жыл бұрын

Norton flags the CPR tool as virus and explain its a reputation something. Is there another version or is this company reputable?

@MarkFixesStuff Жыл бұрын

It's a false positive. Norton doesn't like unsigned software. It's a trusted program and on my system.

@TboneLoyal Жыл бұрын

@@MarkFixesStuff Thank you. Yes i contacted the company and they scanned their system.Great company they contacted me back. I also submitted to Norton on the false positive. Thanks again. Keep making great videos. Been following you for years. Great info everytime.

@DAVIDGREGORYKERR Жыл бұрын

Why didn't they go with a ZILOG Z800 or a ZILOG Z8000 would have made for a much better console.

@MarkFixesStuff Жыл бұрын

Proabaly cost knowing Amstrad

@eto6197 Жыл бұрын

It was heavily based on the CPC, just adding a single custom chip to it. Adding a different CPU would have required to create a completely new design with much higher cost and time required to develop it. Plus: game developers would have had to learn to program a whole new machine - and it's hard to believe they would have chosen to do that since Amstrad obviously didn't have the resources to truly enter the console market and compete with Sega and Nintendo globally.

@DAVIDGREGORYKERR Жыл бұрын

Using the ZILOG Z800 would mean that the original program would run as before but could be rebuilt to make use of the mul divs mulu div divu divs instruction and create a faster running program

@eto6197 Жыл бұрын

@@DAVIDGREGORYKERR In theory yes, In reality there are lots of obstacles. The Z800 never entered mass production. The Z280 which is based on it also was a commercial failure. I don't know if it was still available (and for what price) in 1990. Amstrad, afaik, never chose "special" ICs and never chose an IC where only a single vendor was available. ICs had to be cheap and available in quantities. It also would have required a complete different hardware design, e.g. a multiplexed bus is not easy to implement in a CPC. I'm also pretty sure that the RAM access for the gate array/CRTC would be hard in such a system, so you would have required even more changes to the design. And just because it understands the same opcodes doesn't mean you can run your existing code on it. The CPC software (as it's the case for all 8bit home computer) is often heavily optimized and it's crucial to have exact timings. The Z280 is pipelined so you simply have no longer a reliable clock cycle per opcode.

@DAVIDGREGORYKERR Жыл бұрын

@@eto6197 Turns out that OLIVETTI (Modena) produced a machine that actually used the ZILOG Z800 processor but most likely required a math chip as well but there was no math chip for use with the ZILOG Z800.

@BodziuM Жыл бұрын

You've been hacked dude !!!!!

@benjaminring896 Жыл бұрын

I've burned my rubbers

@eukat3ch Жыл бұрын

dude the long hair

@MarkFixesStuff Жыл бұрын

Yeah dude!

@MD4564 Жыл бұрын

You should credit yourself for the new label.

@Stormy2142 Жыл бұрын

the only problem with the whole project is having to play GX4000 at the end.

@MarkFixesStuff Жыл бұрын

It’s true I’m afraid

@markwrightrf Жыл бұрын

(That's "Ghosts 'n Goblins, you dolt. - Ed.)

@MarkFixesStuff Жыл бұрын

Ooops... Just print another I 'spose!

@markwrightrf Жыл бұрын

@@MarkFixesStuff Classic bootleg error, leave it as it is or re-print it in Times New Roman font for some crazy bootleg reason ;-) Another great vid.

@MarkFixesStuff Жыл бұрын

Comic Sans

@Lbf5677 Жыл бұрын

I thought something about the label looked wrong but couldn't pinpoint it

@LiamGoodison Жыл бұрын

Shame it's called Ghosts 'n Goblins

@MarkFixesStuff Жыл бұрын

It’s pirated so that’s a tribute to the great pirating labelling mistakes of history!

@LiamGoodison Жыл бұрын

@@MarkFixesStuff haha cool

@MisterKaroi Жыл бұрын

Label creation in RGB and Photoshop, that just hurts me.

@MarkFixesStuff Жыл бұрын

Sorry to hurt you Mr. Karoi! I come from a photography background so it's all I know really. What would you use?

@eidgenossenarkebuse Жыл бұрын

You really spend 99€ pro Song? Thats one expensive KZfaq Video.

@suavebob Жыл бұрын

Good job Marky Mark

@MarkFixesStuff Жыл бұрын

Thank you Bob!