I tried it and it works! Some small issues with firmware upload but after rebooting phone it worked great. Thanks man :)

Luv this guy. Like a character straight outta gta iv. Lol Just bought m365 last night. Now to go get this motherboard. 🔥🔥🔥

Great video, easy to follow and very well explained. Thank you!

14:21 Little stunt

Thanks for the video, might try it out with my Xiaomi M365

The way you cut zip ties gives me anxiety. Otherwise good video!

Excellent video, also double thanks for the pointer and source to a DRV file to flash.

Great video, easy to follow , Working great :) Thanks!

Yeeh! good video!! the only way to update the firmware with that board is using a st-link, although as you say it is better to plug in the old board when you want to change the firmware. A greeting.

I'm still riding my m365 that I got before I watched this video 4 years ago. Everything is original even the battery but vibration is making it fall apart. I finally came up on the pro screen and am going to do this upgrade, the screen came from some white segway but it's identical to the m365 pro board. Thank you for this video, I've wanted to do this for a while but am scrd of flashing the controller. I'm kinda proud of the odometer, do you know if it will reset if I flash to upgrade the screen? If it does I might not upgrade, might have a m365 with more wiles then anyone and it's still not showing any drop in power (I go about 2mile trips maybe 3 times a week) and always make sure the battery is fully charged but I think the bms (also never flashed) is keeping max charge at 38v. Not sure where I heard that but something I remember from back in the day when first got it and was looking into modding. Sry about the long message, just one more question in this....... When the battery has a cell bank starting to go instead of just replacing the bad cells can I just upgrade the battery and somehow change the setting of amp hours it has because I've seen in the m365 app that it shows set amp hours. Oh that app is probably where I seen max voltage charge power. Also headlight flashes and effects power if turned on but I never use it. Think I seen its on the battery bms but again it was a long time ago. Anyways, Sry for the drunk Friday night book of a message. Cheers and hope u have a great weekend!

After you installed this. What custom firmware are you using!? For extra speed!?

i just won xiaomi m365 few days ago.watching reviews.nice video Pirate

Top cover seems to fit perfectly just this scratch we tried on ... jesus christ 🤣🤣🤣🤣 man you are awesome 🤣🤣 i never laugh on tutorial video 🤣 your video is first🤣

*NO WAY TO MESS UP THE CABLES* goddamn, i think it should go like this

You should probably invest in a pair of side cutters , using a draft knife is dodgey as for cutting cable ties

What must do to return on the original board with v.1.5.1 firmware?

Thanks dude so much! it is amazing !!!

what's up brotha! I know you through flyin FPV drones but recognized your voice right off. I Just got a used m395 & installed the pro m395 display. It looks like your the guy to ask so.... what setup would you rec. firmware for sure. Like can you run the highest power and KMH firmware with just the m395 with a pro display or do I have to have the pro version of the scooter too. Thanks man...... Keep killin it!

Very nice. Thank you!

Goddamn, great video. Thank you! This helped.

Good watch Pirate ! , my M365 is off the road ,the blue switch on the dashboard has worn away , so i ordered a new one, and for good measure i ordered a new controller too. Post me the old dashboard ! .I miss riding my M365.

I try this and when i.m trying to flash with 155 gonka it shows error 10?and it works only with 151 like an stock one eco and sport no drive any answers?

Have you seen the Boosted Rev and the Turbowheel Lighting yet?

El BMS que debéis de utilizar es el 115 de la versión normal. Antes de cambiar la placa el patinete debe de tener la versión ble 0.81 y el bms 115. Cambias la placa y solamente necesitas cargar el firmware de la versión pro. NO HAY QUE CAMBIAR NADA MAS, TU BATERIA ES NORMAL. CUALQUIER BMS DIFERENTE ES POR QUE LA BATERIA ES DIFERENTE Y LLEVA SU PROPIO BMS, COMO MEJOR FUNCIONA ES CON SU BMS 115.

Thanks for the files for the upgrade. I hope they work ok. I have the EU version in black.

Thanks for this video man, it helped me to do this job. I found I could do the firmware upgrade on the xiaomi home app and got 29kph straight away just choose the pro version firmware when the app gives the option.

Pozdro z Łodzi ;^)

flashed the bluetooth firmware then flashed with custom firmware and the battery indicator immediately jumped to red, speed meter stopped working.... what am I doing wrong?

Do you need to upgrade the firmware then? :) I'll have to check how to do that if I go for this little mod. What do you mean the built in battery will die fast?

That led display you installed is compatible to all unit or like Lexgo r9 lite?

Great video, managed to install the display very quickly and easily thank to you, I just have one more question, is it possible to update the firmware without android device? I am an iPhone user and I can not seem to find the apps necessary for the flash of firmware on the AppStore . Cheers buddy

Great video, just installed mine yesterday. 2 issues I can’t figure out, I am not able to switch to MPH, I change it on the mi home app, but it doesn’t change it on the dash, I also tried other app like M365 dashboard, M365 plus but no luck, also I am not able to update firmware, just says error.

trochę usypiająca muzyka ale oprócz tego wszsytko super :D za subskrybowałem i zaczynam oglądać filmiki szczególnie szukam takiego o oponach bezdętkowych czy warto i jaka jest różnica w jeździe czy bardziej czuć wyboje itd

My m365 is going 30km/h with only one firmware upgrade, it runs fine, and at maximum reach it's basically the same except power draw in hills are bigger and it takes me there faster. I also modified how the battery gets charged while braking and down hills, this will recharge the battery at a greater phase, it works fine for me. I don't want the pro model since the charge time is much longer and I normally don't go for several miles. Basically the original battery takes about 5.5 hours from 0 to 100% and the pro model takes about 8.5 hours from 0 to 100%. That makes the charging capacity in time much greater in the none pro model.

@ Pirate jak po aktualizacji do 1.6.6 zmodowac hulajkę ? apka przestała poprawnie działać. Co robić ?

Hello! Do you know if the upgrade works on version 1.7.1? Thanks a lot

Can you please tell me how to upgrade m365. Changed the dashboard to pro, installed firmware 155, installed gonka, but whatever i do, it won't go over 27 km/h. What am i doing wrong?

Quality Video

Nice video bro

Thanks for sharing

Thank you so much

Ble And Firmware xiaomi scooter pro 2 I have the pro 2 And I installed the BLE via Bluetooth, when it was finished the screen froze and I pressed the powere button and closed the screen. Then it never reopened. The BLE I installed was for the pro 1, if I buy the screen of pro 1 and put it on the skate do you think it will work? in essence the skate has the new screen of pro 2. So maybe it doesn't match the BLE I installed on this screen.

So my Firmware is 1.5.2 and i bought the pro Dashboard but the light is not working and i cant switch between drive modes like in this video, i have an iPhone and there is an App called „m365 downG“ in the apple store, what bin files are needed and where can i find those files to fix this problem?

Can you please share a screenshot with DRV155 32kmh 50k 5% more power.zip settings? I like it very much i just want to change one or two settings (for example motor start speed)

I can't connect the scooter to the xiaomi home app, (verification failed) so I can't drive and the scooter just keep beeping, pls help

in my M365 I have software ver. 1.51. Can I upgrade it directly to the 1.5.5 or I have to downgrade it to 1.4.1 or even lower? Which soft generator should I use ideally?

Hi! My m365 pro clone dashboard is defect. Now got the original one back one but the headlight isnt working. How can i go back to the stock firmware of the m365

Ооо комрад вери гуд видео 😂

Hi I did everything that’s in the video the problem is that after everything I’m having an annoying error 14 when I plug my scooter and in full battery it doesn’t error but when it goes 85% and below the error 14 occurs. I’m on drv 1.55 and bms bl on 10201

Did you manage to unlock the speed to 35kph with this upgrade?

Thanks man, everything works fine (also could't update BMS)

Do you get the PRO firmware on scooter as well or just dashboard ????????? :D

top!! Thank you !!

So many people ask about this. Now a simple link here to answer them all.

I have took these steps and my speed is flashing 55 in red and I have a red spanner flashing does anyone know how to stop this i have tried most things

Can I use this dashboard for non xiaomi scooter? I have Electriq Active scooter and its broken and could not find its replacement.

Thank you :) a pleasure to watch 👌🏻

Working perfectly :)

Aaaah the classic...

Do you know a touch up paint kit for the M365?

When you do a KZfaq tutorial and just winging it along the way. Gottamn.

Dude, do yourself a favor and buy some proper cutting pliers like Knipex 78 03 125. No way to cut rubber with them and also great for zip ties.

I have a really important question! I have an normal Xiaomi m365 with an extra battery so it's already flashed. But know I want to upgrade too pro display because the old power button don't work. How can I flash so the pro display and the extern battery are connected both

I used the iOS version of m365 downg to install a cfw 1.4.2 couple weeks ago. Everything worked fine. Then today, I received the pro dashboard. I tried making my own gonka365 1.5.5 firmware and I tried the firmware in the description. In both cases, the iOS app said the flashing was “done”. But the firmware stays at 1.4.2. Any ideas?

Some instructables recommend updating firmware with the original dashboard in place, before swapping the dashboards.

I have m365 with firmware of v5.5.1 without knowing hot to hack? Can i change my dashboard to pro then hack the speed from there?

Got mine working by using St link flashing the BLE. my only issue is when I turn on the front headlight the scooter goes nuts screen flickering and motor start engaging by itself 🤔 I've tried 2 different displays off amazon now both are doing this. If I unplug the front light the scooter works perfectly fine so strange

Does it go with an doc green esa 1900 scooter

OK where are you getting your firmware files from?

Thank you

the connectors to the speed controller are different for me. Is there an adapter I can buy? can I splice the wires?

so only new panel is flash-able to M365pro. I was unable to flash second file too

We're can I get the firmware and does this allow for the speed upgrade?

There's a few different Gonka firmwares on the link, is there a description for each? Which Gonka is best?

Hej Piracie. Zrobiłem upgrade dashboardu w zwykłej m365. Ze względu na "nieorginalny" wyświetlacz, dodatkowo wgrałem BLE przez ST-Link'a (bez lutowania). Czy mógłbyś sprawdzić, jak zachowuje się dashboard u Ciebie po kilku minutach bezczynności ? W moim przypadku po kilku minutach hulajnoga się wyłącza, czy to normalne zachowanie, coś ala oszczędzanie energii, czy jednak coś jest nie tak z moim egzemplarzem ? Będę wdzieczny za odpowiedź, boję się trochę czy w trakcie jazdy się nie wyłączy, więc wolałbym się upewnić. Pozdrawiam !

BMS cancelled due to retry, not being able to check scooter version after this. Asking scooter version - cancelled due to retry. No beeps. Can't open any more bins because its tells me to "first check version" but I cannot do it anymore. Help?

Looks like you have a clone board, the original board does not flash the Bluetooth LED icon. Also how do you go back to the 4 LED firmware ?? I had 1.5.5 and then it upgraded to 1.6.6. Now If i try to swap back, the leds just count down, and then the scooter turns off. It must be a firmware issue. Any ideas ?

Installed, but DownG app wont let me get to check version. Says encoded BLE. So can't flash software. Mi app won't update to latest firmware either. Any Ideas anyone?

Does this work if you take pro head and connect it to the non pro

Hey buddy but when i try to update the firmware it crashes and saids Unknown error and wont update.! Any help?

Hi lads, this might help someone who thought for a minute, that his scooter was gone for good. I will try to be short and understandable as possible. If you finish your DRV flash and your scooter seems to be gone, you can not turn it off neither connect to it, or your tailight starts flashing when you're moving the scooter, do not worry. Unscrew the screws below the bar like you did when you were installing your new display, and disconnect the male pin from female, wait for 10 seconds and reconnect them. Bam, your scooter is back to life, just go back to m365down g and connect to it once again, check version, open BML bin and flash it. Everything should be okay now. Cheers

I followed all your steps but this doesn't work on my m365 scooter it won't show me speed and battery level. I have used your custom firmware but it just doesn't work any ideas

Z perspektywy czasu polecasz tą hulajnogę czy znasz już jakiś inny model/markę który jest lepszy cena za jakość? Przymierzam się na zakup czegoś :)

Man you really need to use the right tools...

Hi I have a d8 pro clone of the xomi365 pro could I mod it to use the xomi dash like you thanks

Hey everyone! I have a major problem which might have killed my scooter. I did everything Pirate said to (swapped out the board, downloaded all 3 FW files, etc.) and when I went to upload the FW onto the scooter, I was able to upload all 3, but the scooter still behaves as it did before the updates. It looks like everyone else only did the DRV FW updates, and theirs worked. Is there any way I can clear all the FW updates off the scooter, so I can start from scratch with the 1.3.8 FW again?

How do I get this update?

Czesc. Podasz jakis namiar na siebie ? Mam problem ze swoim modem do m365, moze moglbys mi pomoc. Pozdrawiam.

Hello, how should I set the monitor, I don't see the speed and battery status, on the phone I see everything

12:55 :-D Masz jakieś zabezpieczenia pokrywy baterii że tak śmiało po terenie nieutwardzonym śmigasz gdzie są kałuże?

Hi, In M365_downG, I can connect to the new dash baord upgrade. I can also check version and battery info. But when I go to Open bin there are no files to open. Where do I get these files to upgrade the dashboard so it works with my Xiaomi Scooter. Any help appreciated. For time being I have resorted to my original dash board.

Hey there had a question I live in a unicorperated area where junk yards were now being made to house tract and a field they were clearing a worker found a bird scooter first ( gen bird 1 ) the ones you buy for ( $1,200 ) and he said If i wanted it said sure pushed it home bad shape cables and accerler wire .. so gona contact bird in Santa Monica calif . See if they can trace it to owner if they are registered..see if he wants it back .. would it cost a lot to refurbish it and make it usable ..

not only u need bigger battery also diffrent motor the xiaomi m365 pro can go around 35

Does this upgrade make the range worse on the original Xiaomi m365

Where does one download the files to do the software upgrade?

Hi I need HELP !!! So I have this Chinese copy of Xaomi pro. It is working fine but I can’t make any modifications or no even change the firmware. I have been told that I would have to change the mother board. After watching this video I feel like I would have to just change the dash board 🤔🤔🤔🤔 Or maybe both? Can someone help please???

Followed the instructions after successfully flashing DRV155 The display shows 10 and a red wrench. It turns off automatically after 15 seconds which doesn’t allow me to connect via Bluetooth to M365_down or the mi app. Pretty much bricked my scooter. Now I have to st Iink to unbrick my controller or buy a whole new one. Be careful!

You are definitely the craziest polish pirate in the world, love your videos, I upgraded my scooter to DRV 155 and it goes really f*cking fast, but the led indicator doesnt actually work and it doesn't show that it is switched on? Can you help? Thanks

What app is it for update and for ride?

Which cable is responsible for showing when the headlight is turned on?