PISTON RING REPLACEMENT ON A V6 J35 HONDA / ACURA MOTOR : 2012 HONDA PILOT WITH P0302

Рет қаралды 15,671

Күн бұрын

This is a long one so grab some popcorn! I spent a decent amount of time adding a sound track to this one as to not make it too boring. Hope you enjoy and learn something =)
In this episode, I go through the piston ring repair process on a v6 Honda / Acura motor. This is a common issue on specific generation J35 engines that were released by Honda, a TSB was released stating some inspection procedures when misfires develop on cylinders 1 through 4. The spark plugs in these cylinders start to foul from oil consumption and eventually causes a misfire. The rear bank seems to get hit the hardest from my experience. For myself these jobs are getting more frequent as they are falling out of warranty by Honda so customers turn to independent shops to have their vehicle repaired. I find this kind of work peaceful and really enjoy cleaning up the pistons and restoring them to looking new.
Hey, I also do photography! If you'd like to support the channel and/or need to get your hands on a beautiful piece of wall art, check out my photo print gallery at: kristoff-lutchman.pixels.com/
Lots of options to choose from, and the choices are always changing. Thanks in advance if you end up getting something!
Amazon Affiliate links to some of my favorite tools, I make a small commission but at not extra cost to you, it helps support the channel and the hard work that goes into making weekly videos, thanks! These are not the cheapest tools but dang are they good! And have very good warranties, some of them lifetime:
Milwaukee M12 3/8" Ratchet with Battery - amzn.to/3VpvBe9
Milwaukee M12 3/8" Ratchet Bare Tool - amzn.to/3Wux6cu
Milwaukee M12 Stubby 3/8 Impact Driver with battery - amzn.to/3C7Ijr4
Milwaukee M12 Stubby 3/8 Impact Driver Bare Tool - amzn.to/3vhntlv
Sunex Metric Impact Socket Set (My absolute favorite sockets, especially the swivels!) - amzn.to/3Wuxmbs
Vessel Impacta Screw Driver Set (Best quality screw drivers for the money!) - amzn.to/3Z61YBV
Knipex Plier/Cutter Set - amzn.to/3viZ7rq
High Leverage Ratcheting Wrench Set - amzn.to/3WMoZYl
Music provided by Audio Library Plus
Soundtrack in order played:
Doing Nothing - sakura Hz
Waves - The Loyalist
Girls Just Wanna Have Sun - Broke In Summer
Sunflower - Soyb
Feel - Land of Fire
Indigo - Nelvian
Moment - Amine Maxwell
Empty - Land of Fire
Keep on Bringing Me Back - Broke in Summer
Chill Night - Amine Maxwell
Dreamy - Zackross
Chapters
0:00 Intro and Game Plan
1:45 Intake and Battery Removal
3:33 Intake Manifold Removal
7:15 PCM, Power Steering Pump Removal
10:18 Motor Mount Removal
11:50 Timing Belt Removal
14:24 Fuel Rail/Injector and Harness Removal
19:18 Lower Intake Manifold Removal
20:40 Coolant Pipe Removal
25:03 Valve Cover, Exhaust, Oil Pan removal
28:50 Cylinder Head Removal
31:30 Piston Removal
32:52 Piston Ring Removal and Piston Cleaning
40:32 Piston Ring Installation
43:10 Piston Installation
45:34 Cylinder Head / Eco Mode Discussion
46:46 Discovering Bad Bearings
48:21 Cylinder Head Installation
50:00 Reassembly
51:06 Ready to Start, Final Thoughts and Puppies

Пікірлер: 137

@egeg-nr4qs 4 ай бұрын

TO ANYONE WHO OWNS/OPERATES A HONDA VCM ENGINE: Get a VCM-Tuner or Tuner2 to disable the VCM system. This is your best chance of avoiding this problem. Even if it's the simpler manual setting version. It can save your engine. Put one on around 50k miles when VCM caused the rear CAT to fail. Ben running great ever since. Currently at 160k and still Showing 2% leakdown in each cylinder (each warm and at TDC). Cant recommend enough. Great video BTW: Hope my tip doesn't cut into your business too much lol.

@SkillCollectors 4 ай бұрын

We actually tell people to do this as well, however we don’t have any recommendations on which one to get and we don’t install them, more of a DIYer option, thanks for sharing this though.

@jamothegreat6052 10 ай бұрын

This is a great video. I had to retire as a mechanic after 25 years due to health problems. But you know they say once a mechanic always a mechanic. I watch this video because it was one of the engines I never got to really work on out of 25 years. And I have never seen such a thorough video! I was just bored and wanted to watch a nice video. This video was better than nice. You really know what you're doing. If customers saw a video like this they would understand the reason why labor cost or very high. Anyways with that being said. This is a great video and I hope the best for you. Keep up the good work!

@SkillCollectors 10 ай бұрын

Thank you for that really encouraging comment, I'm glad you liked the video.

@bobbyhandley5581 3 сағат бұрын

....yo that is one of the cleanest engine and engine bay that I've ever seen for a daily driver

@briangrant6222 Жыл бұрын

Great video, lots of good information! Have an '03 pilot that we bought new that, fortunately, did not have the VCM yet, so none of those problems. On it's third teenage boy and still going strong, great vehicles! Oldest boy did get an '09 Accord with the v6 and VCM. A little over a year ago, had cylinder 3 misfiring. Not knowing what it was, we replaced the plug and the boot and ran fine...for about a week...then misfired again. Kept happening on and off for about a month. Ended up not being able to troubleshoot ourselves so took it into the dealer. They pretty much diagnosed the issue without looking at it, just hearing what was happening. Basically saving my son the fee to diagnose...told it was almost certainly the rings...$4k job, give or take. Spoke with a couple of the techs about it as it was a slow day for them, and one of them mentioned trying bg moa. Reasoning was it could potentially at least buy some time and wouldn't hurt anything. Went home and researched a bit and found out about bg epr. Tried that for 2 consecutive rounds of oil changes and the misfiring went away. About 5 months back, he found out about another product that basically keeps the car out of eco mode most of the time, so he installed that. Been over a year since the misfiring started and has been running fine so far. According to him, his oil consumption went way down as well. Don't think it would stop the rings from lining up, but definitely think it loosened them up to where they could work more like they are supposed to. Personally, big believer in bg epr after that.

@SkillCollectors Жыл бұрын

Thank you for sharing this experience. Hopefully people having these issues can see this and perhaps buy themselves some time if they can't afford to do the repair right away.

@qt9195 Жыл бұрын

Love your channel and keep up the great work!

@SkillCollectors Жыл бұрын

Thanks so much.

@bohdanked Жыл бұрын

Nice video, I even didn't mind the background music. If I knew other technicians did such a clean job like this I would feel much better taking my car in for service and repair.

@SkillCollectors Жыл бұрын

Thanks, I appreciate that

@sertimins 10 ай бұрын

Great job! Love your commentary. Very useful tips and advices.

@SkillCollectors 10 ай бұрын

I appreciate that, glad you liked it.

@keheinisch5813 Жыл бұрын

Excellent video and your work is awesome 👏

@KoliniusiVeetutu-nf3hh 20 күн бұрын

Im about to do my front head piston ring thanks for the video appreciate and value your time

@securityconnections9497 Жыл бұрын

This is so incredible. Literally going to enable me to fix my car. Thank you so much.

@SkillCollectors Жыл бұрын

Happy to be of service.

@securityconnections9497 Жыл бұрын

@@SkillCollectors hi there! I’m at the connecting rods. I see 3 of mine could use new bearings. How do I identify what bearing color to buy? Brown, etc.

@SkillCollectors Жыл бұрын

@@securityconnections9497 There is a small dab of color on the the edge/side of each bearing signifying what bearing you need.

@SkillCollectors Жыл бұрын

@@securityconnections9497 jetskisint.com/media/wysiwyg/crankshaft-balancer-bearing_colors.JPG like this

@securityconnections9497 Жыл бұрын

@@SkillCollectors oh my gosh. They are actually there!!! I went to the manual to coordinate the piston number to letter on the crank to try and do it backwards. Do you have a patreon or some way to support the channel?

@parapilly 7 күн бұрын

Incredible video!! Just the right details but enough details where you needed them.. Superb. I am going to embark on changing piston rings on my car after watching. If I had one recommendation, it would be to caption torque settings/ other vital numbers as and when you spell them out.

@edwinalvarenga230 Жыл бұрын

Great job broth...it looks like you love what you do ....I and you know what are you doing...

@poshpageboy8417 Жыл бұрын

Just subscribed ! 🤙🏽 the v6 specialist 💪🏾

@SkillCollectors Жыл бұрын

Thank you 🤙

@timmysrvlife Жыл бұрын

Thanks for the in depth showing.

@SkillCollectors Жыл бұрын

Glad it helped.

@jacksonmitchell8023 10 ай бұрын

Great video. I learned a lot from it. My Accord (with same engine) is currently having the exact same issue, keeps misfiring in cylinder 2. I just keep throwing in a new spark plug because I'm not in a financial position to have this job done. Are you able to give a ballpark of how much this job costed the customer so that I could get an idea for myself? If I had all the specialty tools and a car lift at home I'd probably try to do this job myself but since I don't, I'll eventually have to take it into a shop. Once again, great video, I'm glad I was able to learn from it.

@SkillCollectors 10 ай бұрын

Not sure on the cost but it's a pretty big job, I want to say 1500-2000 maybe. There is a commenter in this video that said they used BG EPR and had some good results with that. Maybe you can give that a shot and see how it works until you can afford to fix it.

@robertjackson7590 6 ай бұрын

Great video, I have a 2010 MDX that DON'T have ECO mode and they say these are prone to burn oil too. What would cause this on my MDX? I heard in 2010 the J series started using Low Tension rings and this allowed more blowby coking the oil control rings. If I used cheap oil, didn't change it often enough, neglected the PCV Valve or any combination of them I could develop this problem? Since you don't change the piston is the ring set a different P/N(Higher Tension)? Does this fix it permenantly? I'm at 287K and no oil consumption but had to replace both cams at about 265K. J Series is a great little engine all things considered. Again great video.

@ljbrandt500 Жыл бұрын

With the valve covers already removed, i wonder if checking/adjusting valve lash would have been prudent

@SkillCollectors Жыл бұрын

Wouldn't hurt but it wasn't the reason for the misfire and takes extra time which wasn't sold. In my experience it's rare that it goes out of spec, typically it exhibits different symptoms. Does happen from time to time though. Also no sandblaster at the shop.

@Jack-ev5zn 11 ай бұрын

Enjoyed your video all the way through. I have a V6 2010 Honda with VCR problem with number 1 cylinder. It has 70k miles on it. Started to backfire about 60k miles. Took it to Honda dealer in Marysville, WA. .....won't do a thing. Do you have a way to to contact you via another channel. If you are that close to WA. state, I'll bring the Accord in. You seem to really know what you're doing and have a great attention to detail. Thanks.

@PA-gt1dd Жыл бұрын

LOVE The music by the way!

@SkillCollectors Жыл бұрын

Thank you

@ljbrandt500 Жыл бұрын

does the shop have a walnut shell sandblaster to remove carbon on piston?

@ajazi72 Жыл бұрын

Great job we have the same problem on my wife is odyssey. I got three questions call for the piston bring the compressor tool. What’s the part number or where you get it from and what about the head cylinder bolts and the connect rod bolts do you have to replace them thank you

@SkillCollectors Жыл бұрын

Thank you, wiseco actually sells these. You can get them on summit racing: www.summitracing.com/parts/wis-rcs08900?seid=srese1&ppckw=pmax-tools&gclid=EAIaIQobChMI1dKA1K3m_wIVIRitBh13jwyzEAQYASABEgLyt_D_BwE As far as replacing the rod or head bolts. It’s only necessary if they are stretched, there is measurement procedures in the service info to check this but in my experience they rarely ever need replacing. (I’ve personally never had to replace any).

@seonhepburn6063 3 ай бұрын

This is an excellent video. You are indeed talented. If someone asked a mechanic to conduct this repair what is the likely cost? Thanks much.

@SkillCollectors 3 ай бұрын

Not sure on the cost as I am disconnected from the quoting and billing process. I just get tasked with the work.

@user-bl8wk5ld9j 7 ай бұрын

Hi, We have a 2005 Acura RL that has excessive oil consumption and 30 percent loss on a leak down test for number 6 cylinder ( air escaping out the oil filler cap when number six is at TDC). Compression was good on the rear bank but variable on the front bank. Leak down was steady 10 percent across the board except number 6. That motor looks almost exactly like the RL we have ( I have only just removed the intake manifold and the valve covers). I think I want to try to replace the rings on the front head but is there any way you can confirm that the VTEC motor in our 2005 RL is the same as the one in the video? Also, it has been recommended that I send the head to a machine shop to do the valve guides and seals if I attempt the ring job. Is this a good idea?

@greek19801 Жыл бұрын

Amazing video

@NullWorldOrder 11 ай бұрын

dont you have to put new cross hatches in the cylinder to have the new rings seat? i always thought that. I see youre from VA, same lol. Nice video man. Just learning about these engines since i want to buy an older odyssey. Thanks for the upload, fully enjoyed it and very informative

@SkillCollectors 11 ай бұрын

Thanks for the comment. You only need to hone the cylinder if there's no cross hatching and it's glazed. In my experience, I've never come across one that didn't still have cross hatching. If you wanted to take the extra step to hone it though, it definitely wouldn't hurt anything but there's a lot of clean up to be done after honing to ensure a clean mating surface.

@alexandercuello3168 5 ай бұрын

Amazing skills! Thanks for sanding. Im lucky my 07 pilot doesn’t have VCM.

@ranjah007 7 ай бұрын

Awesome video

@jobe20001 Жыл бұрын

Great informative video. Why not replace the pistons instead of cleaning them? I've got an 07 Ridgeline with 192k on it runs like a top. It does have a knock in the motor thats driving me nuts and I can't identify it. Sounds like a valve tap but I've checked the clearances 2 times and they are spot on. Motor runs great and burns no oil just has a loud tap at idle that goes away as soon as you put a load on the engine.

@SkillCollectors Жыл бұрын

Assuming you have one of these J Series engines... If that sound you have is indeed coming from the head, I have seen prematurely worn camshaft lobes cause mysterious tapping in the head, they usually check out in a clearance inspection because the clearance is done when the cam is not touching the rocker arms. I'd get a stethoscope and listen closely on different areas on the engine. If it's definitely under the valve covers, next time you have those apart, look real closely at the cams, sometimes you even have to remove the cam holders to see the damage. As far as replacing the piston, if it doesn't pass inspection then we'll replace them but I've never actually come across one that's bad. It's just added parts and labor for the customer if we replace everything, the bill starts to add up fast when you do it that way.

@MrJuanv08 9 ай бұрын

Check your timing belt tensioner, they leak out and causes it to lose tension on the belt. It'll sound like it's rattling or knocking on cold starts and eventually sounds like that all the time until there's a load.

@cramthepance Жыл бұрын

Great info!

@SkillCollectors Жыл бұрын

Thanks!

@splicezone 5 ай бұрын

Great walk through, thanks for sharing. too bad that ECO mode is causing all this work in V6 Hondas..

@denisroussel8206 9 ай бұрын

I wish I had such a good mechanic taking care of my Honda Pilot

@Adrian-qg2by 3 ай бұрын

HI Buddy, it is great video and very nice explanation. Our 2012 Odyssey is victim of this problem and would like to get it permanently fixed. Let me know if you can help. I don't think I can do this as it is complex job. Or anyone else who are available in Dallas area. Thanks.

@yoendissanchez6221 3 ай бұрын

Hello friend, I would like to know what condition you are in. I need to change the rims on my 2015 Honda Odessey.

@Watchman999 4 ай бұрын

Great video. Have you had any success with a chemical soak instead of the full ring job? Obviously cheaper for the customer but better for the customer if they can avoid a $4000 ring job

@HighTunnelsGardeningBioChar 5 ай бұрын

Our 2008 odyssey needs re ring w/ 307,000 miles. Is it worth the money to re ring? Cost is $3800+ tuneup and parts of $1600. FYI we really like our Odyssey. It drives better than new.

@nurbolatbazarbayev577 Жыл бұрын

Great job! Did you change the valve stem seals?

@SkillCollectors Жыл бұрын

Thank you, did not change them as they were not bad.

@nurbolatbazarbayev577 Жыл бұрын

Thank you for the reply and I'm happy for you! I have a question. A year ago I bought a Honda Odyssey 3.5 2005 which engine is the exact same like yours in the video. Btw, I'm from Kazakhstan and the minivan was travelled overseas 3 years ago via Armenia but the its a different story) So, the engine mileage is about 200000 and I use Liqui Moly 5w30 oil. About a week ago I noticed little white, blue smoke from the exhaust especially when the ac is turned on and driving reverse. Any ideas for help, thanx in advance!

@whatsurnm3 Жыл бұрын

Do u need a special tool for piston rings or is there other tools to use?

@SkillCollectors Жыл бұрын

Yes, a special piston ring tool is required to remove and install them and then a special piston ring compressor is required to install the piston in the cylinder.

@greek19801 Жыл бұрын

Would this fix the check engine light being on? I got it checked out it says it’s the catalytic converter thing but it burns oil so I didn’t change it thinking it would not fix the issue.

@SkillCollectors Жыл бұрын

If the cause of the oil consumption is the piston rings then yes, it would fix the primary problem, then you'll also have to change the catalytic converter as well. The burnt oil pre-maturely wears out the cat.

@greek19801 Жыл бұрын

@@SkillCollectors THANK YOU!!!!!!

@Charkatak Жыл бұрын

Hey, 1) Have you seen any pitted camshaft lobes or piston slap in J37 engines which had oil consumption? 2) If yes, was there a tapping/knocking noise associated with deformed camshaft lobes or a piston slap?

@SkillCollectors Жыл бұрын

I have seen this before a handful of times, can't remember if it was a J37 but for sure on V6 honda engines. We replaced the camshaft and corresponding rocker arm and it fixed the problem.

@Charkatak Жыл бұрын

@@SkillCollectors If I provide you with a video clip with tapping or knocking noise would you compare if this noise is similar to what you heard on these engines?

@JoeMomma. 10 ай бұрын

⁠@@CharkatakDid you figure it out? I wouldn’t mind taking a look at the video clip to try and help.

@Charkatak 10 ай бұрын

@@JoeMomma. I sold the car last month. That noise wasn't consistent and a different oil brand, addition of marvel mystery oil helped. I drove 3 years like that and haven't seen any degradation in performance or an increase in noise level.

@davidtocuyo4579 9 ай бұрын

Nice Job, I need to do the same thing, thanks

@SkillCollectors 9 ай бұрын

Glad it was helpful.

@PA-gt1dd Жыл бұрын

I would Like to bring my 2012 Acura TL to you do this on

@MocniakFamily 2 ай бұрын

Why not use chem dip to clean the pistons easily and fast ?

@SkillCollectors 2 ай бұрын

Never seen the need, only takes me about 5 minutes now to clean a piston but I'm sure it's probably a decent option.

@TuerkasYTornillos 4 ай бұрын

Bro! Where are you located at? I need to get this done to my pilot.

@trpeters67 Жыл бұрын

you only did 4 of the 6, do 5&6 not ever have issues?

@SkillCollectors Жыл бұрын

5 and 6 are not part of the cylinder deactivation system and are not usually affected. There's a point in the video where I show the hardware in the cylinder heads and it's not present in cylinders 5 and 6.

@MOTOCICLISTA29 5 ай бұрын

You didn’t deglaze/honed the cylinder wall?

@SkillCollectors 5 ай бұрын

Negative, looked good on inspection so it wasn’t necessary.

@mcbdoc2000 4 ай бұрын

At 5:15 you are holding a part…what is the part it is connected to? Small box shape.

@SkillCollectors 4 ай бұрын

That’s the purge solenoid and it’s connected to like a small plastic reservoir thing, not actually sure what it is to be honest. Some sorta chamber.

@mcbdoc2000 4 ай бұрын

@@SkillCollectorsThank you…I am doing this work on my pilot now…really helpful. Most other videos or text I’ve seen say to support the engine at the oil pan when removing the engine mount…where do you support the engine when you removed it?

@diy-justlikethat3316 Жыл бұрын

Where are you located? And what was the total cost for this job? I believe I need the same done.

@SkillCollectors Жыл бұрын

Hi, Las Vegas and not too sure actually. I am just the tech, don't see prices in the back at all.

@richardrussell4065 Жыл бұрын

Should you have honed the cylinders? Is it necessary? If not, why

@SkillCollectors Жыл бұрын

If the cylinder is glazed and lost the cross hatching from the factory then yes, it should be honed. The cylinder should also be measured from top to bottom to check that it's still cylindrical. Most of the time though it's still good to go and only the top but of oil build up needs to be cleaned off.

@richardrussell4065 Жыл бұрын

@Master of None gotcha. I have to check my rings out on my 06 Odyssey eventually. My compression is good but i just want to get in there and clean it up. I installed a vcm bypass and it hasn't been losing much oil, but it definitely burns a small amount.

@dodgefree1400 Жыл бұрын

Nicely done, but no updated parts? Had a 2003 Odyssey that burned a quart in 400 most of its life. Actually wore out the hood catch and cable from adding oil I bought by the case. Never smoked or fouled plugs or the cats. Gave it away at 232,000 miles. It’s still going. Not expected Honda quality for sure.

@SkillCollectors Жыл бұрын

Definitely not expected Honda quality. I agree with you there! From what I understand, you are just buying more time but from my experience, once the rings are changed, they turn less over time, the problem does seem to go away for the most part. There are devices on the internet you can buy to disable the ECO mode but I have no experience with them. ECO mode is just some kind of trick tech for cylinder de-activation to save fuel while cruising.

@Justvn4thGenTL Жыл бұрын

First issue you had was buying a early version odyssey. especially if it was used before and u bought it. Those vans are known for horrible transmission due to weight power ratio & are over stressed because if it.

@dodgefree1400 Жыл бұрын

@@Justvn4thGenTL five years into the model run doesn’t seem early. The transmission failed at 93k when third gear evaporated into the oil. Not covered under the secret warranty. Factory reman plus new pcm was going strong when we gave it away. Honda did step up and we paid labor only.

@Justvn4thGenTL Жыл бұрын

@@dodgefree1400 a 2003 oddesy is still a first generation oddesy if you didn’t know. yea it’s 5 years into making them but they still used the same horrible transmission that is most likely due to weight.

@daveclark8337 Жыл бұрын

This Pilot had the VCM motor (variable cyclinder management) which shuts down cylinders from 1 to 4 cylinders while the car is driving to make the EPA / MPG numbers look better. VCM was awful for the long term reliability of the engine : Ruined the pistons rings, causing it to burn oil, fouled plugs, kill ignition coils, wiped out the Cats, wore out the motor mounts.

@matt11994 Жыл бұрын

Yeah, I like the music

@SkillCollectors Жыл бұрын

Thanks for the feedback!

@Joe-nx7nj 8 ай бұрын

Can you do this on the j37 instead of replacing the pistons just do the updated rings.

@SkillCollectors 8 ай бұрын

There's usually no need to change the pistons, they don't wear out. The rings rotate which is the reason for changing them. So yes, you can do this repair with just the rings as demonstrated in this video.

@tommcfarland5368 Жыл бұрын

I have a 2014 acura TL with the same 3.5 engine @65k. Anyone have any tips for preventing this from happening?

@SkillCollectors Жыл бұрын

I don't think there's any preventing it. Honda just made a bad batch of piston rings which turn on themselves over time due to the ECO mode.

@tommcfarland5368 Жыл бұрын

@@SkillCollectors luckily the TL's dont have ECO mode. So far, so good

@IllIlIlIlIIIllll Жыл бұрын

Get a vcm muzzler

@chrish4977 10 ай бұрын

How much is this job? My Odyssey needs it done and I really don't want to do it in my driveway.

@SkillCollectors 10 ай бұрын

Being a tech I’m actually disconnected from the quoting and billing process so I am not really sure. I want to say it’s probably 1500-2k-ish for parts and labor.

@vigilantezack 7 ай бұрын

@@SkillCollectorsno sir. An all day job like this is going to quote for $3000-$5000. I've had two mechanics say it might be better to just replace the engine. Less experienced mechanics might actually do it wrong and create more problems, that happens too. There was a class action lawsuit in 2013 due to the damage caused by the VCM, especially version 2 which included shutting down cyl 4. If it starts sucking up oil it can cause scratches on the cylinder wall, so they say just get an engine, sigh. But engines right now are going to run almost $10k. For anybody with these Hondas with VCM, buy the device that shuts it down, save your engine. Although it's been a while since 2013, if you bought it used, probably someone has already had to deal with it. Don't let it happen again!

@joebaucom4537 Ай бұрын

THANK YOU JESUS !

@petertarvin4942 Жыл бұрын

Get jacked by doing cylinder head jobs, great fitness advice.

@SkillCollectors Жыл бұрын

Haha, I don't even have to lift anymore 😂

@flacko001 Жыл бұрын

I'm guessing this is like a 4 or 5k job ?

@SkillCollectors Жыл бұрын

The ticket on this one was right around $3k, which also included a new passenger motor mount.

@FDbroadcasting 5 ай бұрын

Don't you need to check and adjust the ring gaps?

@SkillCollectors 5 ай бұрын

Not on the OEM replacement rings.

@iggyvlogs1132 4 ай бұрын

Bro can you do mine please 🙏 I have a 2016 Honda Accord V6 3.5 J35 Y1

@luismarty1685 Жыл бұрын

Is that a VCM engine?

@SkillCollectors Жыл бұрын

Yep, which is said to be what causes the piston rings to turn and cause the oil consumption.

@jamesmcmickle9033 10 ай бұрын

How many hours?

@SkillCollectors 10 ай бұрын

This job takes me pretty much a full day 8-9ish hours.

@aldogaray1374 6 ай бұрын

Why not doing the rings on all 6 pistons you already right there i dont get it why not sold complete job

@SkillCollectors Жыл бұрын

Hope you guys like the soundtrack on this one, I think I added some good music! Let me know what you think and if it was worth adding it :) Thanks for watching!!

@scrapsteenlifeintheforks1943 5 ай бұрын

Cylinder 4 is the only one causing problems in mi e

@ryanjones3277 5 ай бұрын

What’s the cost of this?

@SkillCollectors 5 ай бұрын

Not sure, I just do the work.

@searobin25 Ай бұрын

Their r no locating pins on these pistons. That's why the rings move.

@ljbrandt500 Жыл бұрын

how in the hell can you remember how and where everything gets put back?

@SkillCollectors Жыл бұрын

Experience, keeping the parts and bolts sectioned off and organized helps. But after doing a job many times, it almost becomes automatic.

@TheDivergentDrummer Жыл бұрын

If you take a nut, screw or bolt out to remove a part, once it is off, put the bolt / screw back in it's hole. Then you wont get em mixed up ;)

@Linuxman920 3 ай бұрын

Couldn’t you just drop the exhaust take the pan off and oil pump and take the crank and pistons out thru the bottoe

@SkillCollectors 3 ай бұрын

No, 1) the piston will hit the casting trying to get it out that way 2) even if you could, how will you install it without damaging the rings?

@Linuxman920 3 ай бұрын

Do you mean the cylinder wall. You could use oil through spark plug holes and put it in a bottle and squirt it up the cylinder walls from the bottom. I know the k series is a sleeved block idk about the j series. And I’m pretty sure I have seen it done from the bottom end maybe it works for some engines and not all. I may be wrong as well

@SkillCollectors 3 ай бұрын

The cast supports that hold the crankshaft in the block will impede the piston, you don't have a perfect cylindrical, piston sized opening coming out the bottom. Maybe it can be done on some blocks but I've never seen this on any Honda engine. On some engines, cylinders can be removed separate to the head and the block, for example, on many 2 strokes, the piston is installed through the bottom of the cylinder.

@emmanuelalva6597 11 ай бұрын

Why didn’t they just get a used engine instead?

@SkillCollectors 11 ай бұрын

Installing a used engine costs way more and also a used engine is subject to this same problem. This is a common issue with these older J series honda engines.

@Koala_z06 Жыл бұрын

Short guy tips!😂

@SkillCollectors Жыл бұрын

Gotta look out for the short ones haha

@adamlivelife2608 7 ай бұрын

What a waste of time just put new pistons and rings in

@FSEVENMAN 3 ай бұрын

Wow that's unbelievable I've never met anyone dumb enough not to just replace all the rings on all the pistons to do it selectively is begging to do it again in a couple of months that is just plain ignorant.

@SkillCollectors 3 ай бұрын

Read the service bulletin and you’ll understand.