Pixhawk4 Setup | Tarot Frame | Extended Arms | Build
Рет қаралды 16,962
4 жыл бұрынFlight video is out now ###
• First Flight! Tarot 65...
This modified tarot sport drone has been upgraded with a new pixhawk 4 flight controller. Im excited to keep adding new features and parts to this build. Lots more to come! Below I Have listed the parts I used in this build.
If you are interested in how I extended the arms here is the video.
• How to extend arms on ...
######## I do not recommend this motor prop combination with such a large battery! it might work will a lighter/smaller battery but watch this video I made to find out why: • BROKE a $1000 drone! W...
------- FLIGHT CONTROLLER ------
- Pixhawk 4:
Amazon: amzn.to/2QnRkoS
Bangood: www.banggood.com/custlink/GKG...
------- FRAME -------
- Tarot 650 Sport frame:
Amazon: amzn.to/2NRoprH
AliExpress: s.click.aliexpress.com/e/ClKJCBBw
-------- MOTORS -------
These motors are not strong enough.... see my previous notes.
- Tarot Motors 6S 380KV 4108:
Amazon: amzn.to/2Ot4BIV
Bangood: www.banggood.com/custlink/mvK...
AliExpress: s.click.aliexpress.com/e/K6XhAZlA
---------- ESC ---------
- Hobbywing 40amp ESC:
Amazon: amzn.to/2Ku8j5k
Bangood: www.banggood.com/custlink/mGG...
-------- PROPS --------
- T-Motor Polymer 17” props: bit.ly/378Q3Ih
------- BATTERY ----
- Tattu 10000mAh 6s smart battery: amzn.to/2Kt6iGx
------- RADIO --------
- Jumper T16 Pro: amzn.to/37hCsib
------ GIMBAL -------
-Storm32 3 axis
Amazon: amzn.to/38tMVaC
Bangood: www.banggood.com/custlink/DK3...
AliExpress: s.click.aliexpress.com/e/3rnNa4Uo
Other Products Used
No-Clean solder wick: amzn.to/35a8xGw
##############################
DISCLAIMER: This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission without any extra cost to you. This helps support my channel and allows me to continue making awesome videos like this. Thank you for the support!
@MehdiNY 4 жыл бұрын
All your videos are amazing, thanks for your great work man !!!! cheers!!!!
@builtfromhome9207 4 жыл бұрын
Thank you I’m glad you enjoy them!
@WayneHunter1000 4 жыл бұрын
Thanks, i will be starting a project soon. Very helpful
@builtfromhome9207 4 жыл бұрын
Awesome! I have more videos that might help you in your build. Check out my pixhawk4/tarot playlist on my channel. kzfaq.info/sun/PL56fl-387p-J67WXT8GiLuD3D7BZ4KBv2
@eaclutch169 4 жыл бұрын
im very impressed
@builtfromhome9207 4 жыл бұрын
Thanks!!
@mattelanni 4 жыл бұрын
Good job! I'm very interested in more flights and features tests :)
@builtfromhome9207 4 жыл бұрын
Just came out with this one! kzfaq.info/get/bejne/hM56fMd808CaqI0.html
@collinsnjarara3352 4 жыл бұрын
Awesome build video. Could you please consider doing a video showing us how you wire up a frsky r9m, your gimbal, landing gear,fpv camera and also how you set everything thing up on mission planner.
@sz72909 4 жыл бұрын
Hi, great work. I love the stability and graceful movement for smooth video and still photography. Cost of everything comes to about $1800 (GoPro8, Radio, 3-axis Gimbal, etc.). Do you know if one can build a GPS-Hold Quad for still photography, and maybe even smooth video (NOT A RACE Drone) that is around $300 or so? The reason I say $300, because we can buy the DJI Mini Fly-More Combo for $500 (for now, I'd like to start with something smaller than a Mavic Air 2, or the upcoming Mavic 3 Pro). Thanks
@gtaitbiz7787 2 жыл бұрын
Use a solder suction, then use the wick and wipe it
@husseinsleiman6119 11 ай бұрын
Hello:) Thanks for the video! I was wondering how did you power your PX4 previously (i.e. without using the PDB) ? I am working on the same frame and I dont have the pdb so I was wondering how can I power the px4. Thank you in advance!
@srnunan4783 4 жыл бұрын
I dont get the blue 'act' light on the fmu side, instead the b/e light flashes, and i get no pwm outputs on iopwm or fmupwm. Maybe dead unit..
@petergouws723 3 жыл бұрын
hi, how do you add landing gear to the aux ports? please let me know thanks.
@jalpa9642 4 жыл бұрын
Hello, the "No Clean" is Copper Braided Solder Remover, it acts as a wick to absorb molten solder. What AWG wire gauge did you use to extend leads for Motors & ESC's....? Yeah it looks, I used braided wire sheath on mine also keeps all wires routed & looking clean..! What's next..! First Mount Pixhawk & GPS, then find on-line the Pixhawk Wiki and read documentation 1or twice, maybe 3 times-take notes on the wiring..! I've build my quad-copter but the Pixhawk PX4 I bought from china was a lemon, so I'm having to re-do all my wiring because I bought the Holybro Pixhawk 4 w/PM07, like yours and I'm eliminating PDB on frame. It's how I know..? =) May I suggest that you use the "LAND" option so your craft doesn't land hard and then bounce after touch down..? =)
@bradgardner5675 4 жыл бұрын
did you get your servos to work on the AUX. I couldn't manage to make that happen
@nacorti 4 жыл бұрын
What process did you use to set up your ESCs? I'm building a similar copter but am not getting sufficient rpm on my motors to get airborne.
@ghislainekegnon6627 3 жыл бұрын
hi, please what is the maximum range of the tarot x4, ie altitude, maximum distance between the radio controller and the drone. Thank you
@gtaitbiz7787 2 жыл бұрын
would you use a 2500kv T-Motor on a frame like this?
@trajanonerd 4 жыл бұрын
I have a 4 in 1 ESC (BlHeli 20A) and I’m not sure how to connect to the Power distribution board. Would connecting the the ESC directly to the battery in parallel with the Power distribution Board and then only connecting the signal from the ESC a stupid idea? Thanks for the help
@zz-nc5kx 5 ай бұрын
I am planning a 650 Sport build and have some questions. What gauge wire did you use for ESCs? I’m planning on 12 wag. Where did you get the late for mounting the Pixhawk? I want to mount my ESCs in the center body but need a plate for mounting. Also planning on a Matek power distribution board.
@gtaitbiz7787 2 жыл бұрын
Why did you use a 17 inch prop? How did you extend the arms?
@aarondiaz4232 4 жыл бұрын
Hi! Do you have a tutorial about the PixHawk 4 setup in ArduPilot? Nice videos!
@builtfromhome9207 4 жыл бұрын
This is the only one I have as of yet. I will be coming out with more on the pixhawk 4 though. Subscribe to see when they come out!
@jackwritter1302 3 жыл бұрын
where'd you get the top plate? and the PDB?
@muhammadalfarizi6069 3 жыл бұрын
I'm using this frame for indoor flight without gps, but I'm always got EKF mag anomaly, any solusion sir?
@robertparenton7470 3 жыл бұрын
How many inches are the arms and where can you buy them?
@dcarter52 4 жыл бұрын
Can you do a video on downloading and using the flight planner software, and maybe a video on flashing the esc motor controllers. Did/do you need to flash the esc motor controllers?
@builtfromhome9207 4 жыл бұрын
Good question. I will consider doing a video for flashing your esc.
@panchampatel1 4 жыл бұрын
that will be awesome
@gtaitbiz7787 2 жыл бұрын
Can you use a larger motor?
@dcarter52 4 жыл бұрын
Nice setup! Nice Video. I am building my first drone and it's a Tarot 650 Sport. I do have 2 questions. 1. Where did you get the boar that is below the PixHawk that you also mounted other items on. 2. I have an old Pixhawk 2.4.6, do you recommend I upgrade to the PixHawk 4?
@builtfromhome9207 4 жыл бұрын
HolyBro has a store on Amazon where you can buy all the stuff you need. Or you can go directly to their website. Shipping is normally free on amazon but costs extra on their website so keep that in mind. You can decide which is better for you. I bought a package form their website. Amazon: Power Management Module (this is the board you were asking about): amzn.to/2OX7k02 Pixhawk4 + GPS amzn.to/34YyUzs HolyBro I got package 20034: shop.holybro.com/pixhawk-4_p1089.html As for what to use. I also started with an older pixhawk 2.4.6 board and it worked ok. However, I really wanted a controller with better compute times and ability to run more imports without the chance of something failing. The pixhawk 4 runs with the FMUv5 standard and high-performance, power-efficient STM32F7 chip. When it came down to It I felt more comfortable knowing my over $1000 drone and camera gear was being powered by a flight controller that was build with quality in mind. My older pixhawk was just a nock off cheap controller. So what should you use? Well it all depends on your budget and what you want to do with it. Does that help at all?
@AAR978 3 жыл бұрын
Pixhawk 4 program video plz
@dcarter52 4 жыл бұрын
Where did you get the mounting plate hardware you placed the Pixhawk on and the stands to attach that board to the Power board below?
@builtfromhome9207 4 жыл бұрын
That was from on old drone I had laying around. You could buy a battery tray though like this one and make it work. Or if you have any old flat pieces of plastic laying around you could use that. www.banggood.com/custlink/3GG3ApfRQO
@dcarter52 4 жыл бұрын
Can the esc(s) be connected using the pins on the power board? Or must the esc(s) be soldered to the power board?
@CFCVal 4 жыл бұрын
Can u make a video of pixhawk to final connection
@corycarreira9524 4 жыл бұрын
Do these custom quads have flight stabilizer options?
@builtfromhome9207 4 жыл бұрын
Yes. They all can be configured to have stabilization. Well at least the ones I build with pixhawk flight controllers.
@radon1221 4 жыл бұрын
This provided a bit of help, so thanks! However I'm still confused about how to power the PixHawk 4 Flight Controller as I wont be using the power board provided by Holybro as I will be using the Tarot TL2996 12S 480A Power Distribution Board. Any ideas? Thanks!
@abengtz 4 жыл бұрын
Radon use the holybro pm02
@radon1221 4 жыл бұрын
@@abengtz Thanks, will check that out! :)
@emreceliltayyar1236 3 жыл бұрын
@@radon1221 Hello, what did you do? I cannot use PM07 as my motors draw 192 A and I cannot find a suitable power module.
@radon1221 3 жыл бұрын
@@emreceliltayyar1236 Use a more robust PDB as you are pulling 192A, you can find loads on AliExpress, just find the ones that are called 'Power Distribution Board 200A for agriculture drones'
@gilbertvela1936 4 жыл бұрын
Where did you get the extended arms? My apologies if you have already answered this question.
@builtfromhome9207 4 жыл бұрын
kzfaq.info/get/bejne/brh7p9Oiuq6Xlac.html This video will show you.
@marinemarine 4 жыл бұрын
Flight time?
@dcarter52 4 жыл бұрын
Do you recommend the metal or plastic case?
@builtfromhome9207 4 жыл бұрын
I just got the plastic becase it was cheaper.
@BB-cw2ru 2 жыл бұрын
Hey, I'm very interested in this drone. I was wondering could I pay for you to build me one?
@Johow 4 жыл бұрын
Hm... long power wires to the ESCs will kill them. Especially when you fly with large props.
@mackdaddy877 3 жыл бұрын
That's a false statement, increase wire size to accommodate length.
@Johow 3 жыл бұрын
@@mackdaddy877 just add a couple of capacitors and you will be safe. But still - those long power wires are not good for your ESCs.
@panchampatel1 4 жыл бұрын
I am building a drone because I watched this video. I am using everything that you are using. My drone is going to be hexacopter. I have one question. Did you connect Hobbywing 40amp ESC directly to power distribution board?? You didn't use any UBEC or anything, right?
@builtfromhome9207 4 жыл бұрын
Yes the ESCs are connected to the pixhawk 4 power distribution board. I do use a ubec for powering other thing on the drone like my fpv.
@panchampatel1 4 жыл бұрын
@@builtfromhome9207 Thanks bro this is huge help. I was super confused before. Now, I can peacefully connect my ESCs directly to power distribution board when they arrive.
@builtfromhome9207 4 жыл бұрын
@@panchampatel1 at around the 9:00 min mark you can see the red and black wires from my ESCs connected to the power distribution board.
@panchampatel1 4 жыл бұрын
@@builtfromhome9207 I have another question. Is your connections something like this? FMU-PWM-IN(power management board) to I/O PWM OUT (Pixhawk)? Here is the picture of my circuit instagram.com/p/B-GALaLDPP4/ If possible can you please provide picture of your Power distribution board wires to Pixhawk connection. Do you have instagram? In case if the link doesn't open This is my instagram, (instagram.com/win.surfer.archer/). Insta User name: win.surfer.archer
@robertparenton7470 3 жыл бұрын
May ask this question... Would you sell that completely built drone without the goPro for $1100? I can pay with PayPal and I take the full liability for your product.
@dcarter52 4 жыл бұрын
Did you drill holes in your board to attach the platform o which you attache d the power management board underneath and the PixHawk on top?
@builtfromhome9207 4 жыл бұрын
yes I did drill holes in the top-plate of the drone. If you still need to use it as the PDB then i would not recommend that. I was going to use the Pixhawk4 PDB so it was not a big.
@dcarter52 4 жыл бұрын
I am building a Tarot 650 with a Pixhawk 4, may I DM you for some help?
@panchampatel1 4 жыл бұрын
I am making Tarot 690. Did you connect Hobbywing 40amp ESC directly to power distribution board? without UBEC i guee?
@dcarter52 4 жыл бұрын
pancham patel I haven’t got that far yet. I want to connect the esc(s) to the pins and not solder them directly to the power board. How are you doing it???
@panchampatel1 4 жыл бұрын
@@dcarter52 I am waiting for my parts from china(AliExpress) to arrive. About 23-24 days to go. . Are you using Pixhawk 4?
@emreceliltayyar1236 3 жыл бұрын
@@panchampatel1 Hello, the maximum current in the power module of Pixhawk 4 is 120. Can I install motors that draw a total of 192A current? Is this a problem?
@MagsterMagic 4 жыл бұрын
Setup and flight time please
@builtfromhome9207 4 жыл бұрын
Check out this other video for that. First Flight! Tarot 650 Sport Extended Arm Drone with Pixhawk 4 (Awesome Flight Time!) kzfaq.info/get/bejne/hM56fMd808CaqI0.html
@Nividium 4 жыл бұрын
Вибро развязка плохая.
Built From Home
Рет қаралды 19 М.
Watts Innovations
Рет қаралды 36 М.
Dennis Baldwin
Рет қаралды 220 М.
lev89k
Рет қаралды 2,6 МЛН