Pro tip: you can watch series at KaldroStream. I've been using it for watching a lot of movies these days.

@Ramon Jack yea, I've been using Kaldrostream for since november myself :D

True

Learn to load your trailer right.

BMack37 Is that a tool chest... Rolling down the stairs? Haha

lol

should have painted the trailer SHORT BUS YELLOW !!

I know what you mean! I have a PJ dump trailer and now I want the upgrades that I don't have. That is the only problem buying used, it is what it is!

Thanks

And Coco puffs should grow on trees. How hard is it with a spring loaded extendable jack?

Those Jack's have a 2 stage speed on them. Pull in pr push the lever the change from low to high. By the looks of it he cranked the jack up in low

that "crappy" colour prevents most idiots from running into your trailer.

And no Gap between the bed and gate like pj

I've got the 14' 14k gooseneck Big Tex. So far I like it. I pull it with a '12 Dodge Ram 3500 crew cab diesel.

good idea

mattsbrute yup i rather have a 7x12 easier to hit tight alley spots and lighter means more pay load

Yeah? Well ask your grandpa about a Allis Chalmers HD5 crawler high lift compared to the nearest equivalent John Deere. The Allis Chalmers has buried 3 John Deeres in the grave yard and is still running strong. It's a balancing act. You can have a lighter trailer that will hold up if you want to pay the premium for lighter stronger steel or aluminum. Aluminum doesn't fair well with twisting. Most people aren't equipped to weld aluminum. What about the landscaper that needs larger to haul fluffy stuff.

That’s kinda funny because I have the 16’ PJ Gooseneck & pull 16,000+ lb. load after load. My dealer installed 8,000 Axles and as long as I load towards the tailgate. The load will dump just fine after 4 years I Need to buy new batteries. I just replaced the tires and it’s hauled more loads then I can count. I pack my 9500# Cat Skidsteer all over usually on 35 mi. trips. I did have an issue with a wheel bearing which was my fault but that was it.

how much more?

He mentioned that the trailer was built specially for what the operator intended it to be used for. The operator intends to use it to pull a tractor or skid steer with so this actually works out great for him. U can tell by the side walls he has no desire for hauling off large amounts of heavy debris or landscaping materials. I use mine for hauling my tractor and skid steer with and I also use mine for hauling of large and heavy tree debris so I have the tall side walls and lighter trailer for heavier hauling but that wouldn’t matter to the guy in this video because of his hauling preferences.

???

Tavit Kassardjian noticed that too plain as day. “Carson Schifsky” has a review out on his brand new shitty PJ trailer.

David Maez lmao. It’s cord. Not chord. Your not getting 3 cord on a 14’ trailer unless it’s stacked. Let alone tossed or dumped in

I always Stack my loads in my trailer Besides I don't have nothing to prove to you

I sold firewood for 28 years. It’s not physically possible. If you aren’t lying about 6’ stalked height then is 4.5 at best. 3’ tall is is under 3 and 5’ tall is under 4. Not to mention, unless you’re hauling dry pine an average cord of dry wood is 3k lbs. but you said green hardwood. Most green hardwoods are 4500-5500lbs a cord. You’re not hauling 5-1/2 cord of green oak. Not physically possible on length and weight. A 14k gvwr trailer won’t haul 14k lbs. usually between 8500-9k actual carrying capacity. Quit lying to yourself. Tossed in (or dumped in) is usually 60% of stacked volume dimensions Here. Maybe you can learn something www.firewood-for-life.com/firewood-measurements.html

@@Freakingstang I don't care what you say like I say I have Nothing to prove to you And it's not dry pine It's pinion firewood And also my dump truck is loaded to pulling the PJ trailer I could care less if you been song would for 28 years I sell a lot of firewood also Like I say I have nothing to prove to you You're probably some fat old man sitting on a couch just talking trash need to grow up

@@davidmaez2948 spell check is a thing...just saying

I don't think it matters, but it kind of makes sense.

It doesn't make a difference. Length of the trailer sets the location for the conspicuty tape. If I remember right a 14ft dump doesn't need it but the factory puts it on.

Tre $12,475.00

Pulls good empty, tracks straight and smooth empty. The truck squats big time when loaded

Because it is a 14k trailer, it will need need state inspection along with the tow vehicle. Also the driver will need a cdl, along with a medical card to be legal. In Illinois that is. A half ton will not do the job, but I see it everyday.

In Tx at least the minimum weight required for a CDL is 20,001 lbs. Medical card is part of getting your CDL to begin with. Reasonably certain that is universal. (CDL holder driving for System Transportation)

Most newer 1/2 tons can handle 11,500 lbs or more. Its not the taking off thats the issue its stopping it.

Anything this big requires a weight distributing trailer hitch and sway control. I pull a 12k and without bars and sway control she's deadly

Another video coming, I thought it was in there

Depnds on the truck. This F150 around 11,500 lbs

Lol "leagel"

blutrax8201 $12,745.00

huh ?? Thats a reese hitch or another similar brand rated well for the weight of the trailer. It isnt just hooked to the bumper , it is a big heavy duty steel hitch mounted to the truck frame..

Roughly $9800

At the very least i would only pull the trailer with a 3/4 ton i would prefer a 1 ton.. people using a 1/2 ton truck to pull this loaded does not have the safety of others in mind

Live a little and load it up with gravel and pull it with a half ton lol. Put some airbags on half ton and let it roll. Lot cheaper than buying another truck just for a trailer. Airbags are like $1400 installed. Get a electronic brake and your good.

Houndsman One i

$10k

For 10 k it should of have had been galvanized in my opinion

NITE equipment

@@Toolsinaction Thank you

chontas Lopez Go there with cash or a credit card...pretty easy

There is a notch in wall of the box for the cable.

no but we noticed a clown not realizing there was a cut out notch for the cable to be out with the lid closed !! LOL

CHEPOSPOOKY you get what you Pay for

When you are not dumping your whole load, gravity down with weight in the bed is scary.