This video will show how to leverage iLogic designs by demonstrating the Place iLogic Component command. The video will show how to link parameters from the main assembly to the iLogic subassembly.
Пікірлер: 19
@ivanildolopes43358 жыл бұрын
Excellent vídeo.Congratulations by the way that positioned his explanation.Easy to understand and quite objective.
@3DSteve5210 жыл бұрын
In response to Nick's question, the Place iLogic Component is not compatible with Frame Generator assemblies. I discovered that while creating this example. In this example I used the Content Center to create custom channels, and my iLogic rule pushes parameter values into the individual channels.
@PomPiDoum Жыл бұрын
Thank you!
@nickeide624610 жыл бұрын
I can't seem to place an iLogic assembly with Frame Generator parts. Does your rail assembly not use frame generator?
@vudongmda5 жыл бұрын
I have a problem when i place an Ilogic assembly (i will call it is A) into another larger assemble (Call it is B) which contains A. when i placed A into B, the accessories of A which i had written commands in a rule of Ilogic, it would be changed the name as well as a new assembly from A. but the content of rule in new assembly didn't change anything. so the rule of new A couldn't find them, and condition changes(height dimension) of those components didn't run when i chose some choice in a form box. exactly, after placing A into B, A was became A-01, A-02... but the content in the rule of new assemble A-01, A-02 don't change anything, it still keeps the content exactly like A. therefore, every dimension which i chose, it didn't work. I know this video had made since 2012, but could you please help me do it again and share me content of rule of ilogic in your drawing?
@3DSteve525 жыл бұрын
Here is a link to where you can download the model. a360.co/1MHnhRf One possible cause to your problem is the browser node names. iLogic uses the browser node names for components. Since the Place iLogic Component command copies the assembly, it is likely renaming the browser nodes. A way to prevent this is to give the browser nodes static names. This is done by editing the name of the browser node. Just simply removing the ":" is enough for the software to see that you edited the name of that specific node. You will have to edit the iLogic code to match the new browser nodes. If this doesn't work, let me know. I would be happy to look at a model for you, if you would like to send me one.
@ChandanSharma-ud4zv3 жыл бұрын
Hello sir, I need help how to create ilogic command,buz we are designing a steel door so how to apply these futures ,
@3DSteve523 жыл бұрын
You would need to model your components with parameters. At the assembly level, you can have the parameters that drive the size of the door. Then your iLogic rules will then distribute the parameters into the necessary files, if calculations need to be done, it is possible to include those in an iLogic rule or parameter definition. If you want more specific help, feel free to email me.
@paulkim45234 жыл бұрын
Hello. I am 7 years behind. I also used the Content Center to create custom channels, and it works for the first placing. But when the second placing has different size, it affects the first one's size. Can you tell me what the solution is? I try to download your file at the previous comments, but the link is no longer working now. If you still have the file, can you share the file here again?
@3DSteve524 жыл бұрын
When you are placing from the Content Center, Inventor will generate an ipt of the channel you need. That ipt of the channel will have a specific length. If you need a different file of a different length, you will need to create a separate ipt. If you run the Place From Content Center command again and specify a different length, it should create a second ipt from that channel's family with the new length. If it is somehow effecting the first channel you created, you will need to look at the column in your Content Center Family that determines what the name of the IPT will be. Often times with a channel, it will prompt you to add a length or distinguishing attribute to the file name. Often, I add the length attribute to the file name formula to account for different lengths of the channel.
@paulkim45234 жыл бұрын
@@3DSteve52 Thank you so much. I removed ":1" at the end of the member name in iLogic rule. And it's working without any issue now.
@Datrial4 жыл бұрын
Hi ! Is the file still available ? I want to create exactly the same for practice. But cant find the video where you make this rail.
@3DSteve524 жыл бұрын
You can try these files, drive.autodesk.com/new/de29c8fc2/s/SH919a0QTf3c32634dcf170534b5b8a6eb30 These should be the same files I used to create this project.
@Datrial3 жыл бұрын
itsaCADworld thank you !
@VIKU198010 жыл бұрын
HOW I CAN DELETE ANY PART FROM ASSEMBLY THROUGH ILOGIC, PLEASE HELP ME
@Lesionread7 жыл бұрын
suppress
@stevenmejia65759 жыл бұрын
Can you share this file ? thanks
@3DSteve529 жыл бұрын
Steven Mejia You can download the model from here: a360.co/1MHnhRf